Latest aluminium mug Tenders | Government aluminium mug Tenders

State Government

CTN :38964673

06 Feb, 2025 60.00 Lacs

Vaishali - Bihar

Tender For supply of work table with undershelf and middleshelf , dosa plate or gridlle plate , single burner low hight , three burner range -existing , two burner range - existing , exhausthood - iland type with bulk head light , ss tandoor , chapatti plate cum puffer , exhaust hood , work table with sink , meat mincer , veg cutter , mixi grinder - commercial capacity -7 kg , two sink unit , work table with bracing , 4 burner range , island exhaust hood , rice boiling pan 80 ltr.- gas opertaed , stock pot , 4 doors reach in chiller- 1100 lt , work counter with overhead shelf , spredaer table with overhead shelf , work counter counter with overhead shelf , ss angle racks for dry store , ss pallet - nilkamla or aristo , chest deep freezer 500 lt , garbage dishlanding table , glass shelf , garbage bin nilakaml with foot operated , three sink unit , wall shelf , drain drought greating , ss racks clean dish rack , pot rack with 4 self , transport trolley , ss rack with 4 self , pulveriser , potato peeler , wet masala grinder- tilting type , ss racks , gas pipe lile work with all fitting and gas bank for 12 cylender manifold syestem with seemless pipe c class 3 by 4 dismental work included , sitc exhust blower didw bacward blowe type syetem with enclose body sound proff double skin wiyth 12.5 hp moter - 16000 cfm belt driven with star delta pannel , sitc air washer with doubel skin body forward blower with ss 304 watre tank with salulage pad 100 mm with belt driven blowe mother 7.5 hp 3 ph with dual starter and cable , gi ducting for exhust and fresh air double luver ppgi grill and demper in hood , repairing of 4 door refrigerator , all plumbing - electrical-civil work minor - painting- lighting in kitchen etc. as mentioned in specification , instuctor or teacher office cabine with ppgi pannel with galss and funder max with 3 nos chair and 1 side table with office table with complete set up , adrresing sound syestem with 6 speker and 4 cahnnel ampifier with wireless mic total syestem with sitc - brand- ahuja studio master or jbl with branded company with complete setup

Central Government/Public Sector

CTN :38956028

04 Feb, 2025 NA

Sultanpur - Uttar Pradesh

Tender For supply of d38999/20wd35pn, 37-pin circular connector , d38999/26wd35sn, 37-pin non filtered crimp , d3899920fc-35pn, 22 pin male panel mountable connector , d3899926fc-35sn, 22 pin circular connector , d3899933w13r, dustcap connector , m85049/38-13w, back shell of 22pin circular connec , m85049/38-15w, backshell for 37 pin connector , m85049/38-25w, connector backshell , stdn0600-01, st. steel flanged lock nut , stds0306-21, st. steel cheese head , stds0306-51, m2.5* 6 stainless steel pan head , stds0406-51, cross recess pan head screw , stds0408- 51, screw m3x8 cross pan head , stds0410-21, m3 x 10 chhd ss 304 , stds0410-51, screw m3x10 cross recess cheese , stds0416-21, screw st. steel, cheese head , stds0506-51, cross recess pan head screw , stds0508-21, screw cheese head. , stds0508-51, counter sunk screw , stds0610-31, allen head screw , stds0610-51, screw st st m5 x 10 mm stainless , stds0620-21, m5 x 20 slotted chhd , stdt0304-91, st. steel helicoil thread insert , stdt0404-91, helicoil thread insert , stdt0504-91, helicoil thread insert , stdw0400-71, washer (plain) , stdw0400-81, m3 spring washer , stdw0500-71, m4 plain washer ss 304 , stdw0500-81, m4 spring washer

Central Government/Public Sector

CTN :38917672

31 Jan, 2025 50.00 Lacs

Mysore - Karnataka

Tender For e-tender for purchase of lab equipments/apparatus - lab equipments/apparatus, steel ball (3kg) 20 cm diameter, steel chain 5 meter and 1cm diameter, newton s ring apparatus, michelson interferometer, fresnel biprism, optical bench kit, radio active sources kit (brit/barc)1. gamma source kit - 4nos2. beta source kit - 4 nos, hall probes and sample, four probes and sample(temperature upto 300 c), curie temp kit, ics for electronics (2input) ic number 1 - 7408, ics for electronics (2input) ic number 2 - 7400, ics for electronics (2input) ic number 3 7402, ics for electronics (2input) ic number 4 7432, ics for electronics (2input) ic number 5 7486, ics for electronics (2input) ic numbe 6 - 7404, ics for electronics (2input) ic numbe 7 - 747266, cutting pliers and wire cutters, quinckes tube, lattice dynamics kit, dielectric constant kit, scientific tuning forks kit , frequency 256 to 512 hz, with hammer & wooden case, cro cables bnc to bnc, magnetic plotting compass, deflection magnetometer, rectangular post office box for resistance measurement, diffraction grating, glass prism, nand gates (ic 7400 (2 o/p), nor gates (ic 7402 (2 o/p), not gates (ic 7404), and gates (ic 7408), or gates (ic 7432), leds (5mm with any colour), fecl3, cathode ray tube, b.g. lamp & scale arrangement, plancks constant setup, photodiode characteristics setup, polarimeter - sugar, multi strand copper wire, with different coating colours(black,red,green,yellow), angle measurement protractor 0 to 180 degree, steel wire, 5 mm diameter, bundle 100 m, tungsten filament lamp, lamp or bulb-is:418, 60 w, incandescent bulb 100w, high pressure mercury vapour lamps (hpmv lamps), 400 watt, male dual alligator clips for oscilloscope, stefan constant kit, 400 w high pressure sodium vapour lamps (hpsv lamps), meter bridge, solar cell kit, microscope(with digital screen led screen display), herbarium press, digital microscope fluorescence laboratory microscope with pc and hd camera, electronic balance - readability 324g, accuracy-0.0001repeatability 0.0001, main body dimension 213wx356dx338h mm, pan-91mm, molecular model kit-standard - large, lightweight molecular models for classroom demonstration of organic and inorganic structures. for building models to scale of 20 cm/ and 8 cm/ . bond lengths range from 5.5 to 27 cm. atomic centers are 5 cm in diameter, finished in standard atom colors, and have a reinforced vinyl receptor at each bond position for insertion of connecting rods (bonds)., potentiometer - 4 electrodes for different titrations resolution:0.1 mvdigital led displayaccessories electrode:pt-electrodeglass electrodesilver electrode range 2v to 2vmagnetic stirrer in built, conductometer - 5 ranges0.0-20.0 s/cm ;20-200 s/cm200-2000 s/cm;2-20ms/cm20-200 ms/cmresolution 1.01 s/cmoscillator 1kh2 inbuiltcell constant 0.2-1.41accessory electrode- conductivity electrodemagnetic stirrer in-built, fume hood - velocity control of approximately 80-100 feet per minute. semi close ventilated exposures. outer construction of thick pcrc, pre coated corrosion resistant gi sheet. inner construction of high grade ss-304 provided with sliding sash made out of special grade shatter proof glass duly framed in wooden/aluminum frame with sliding motion and counter weight balanced mechanism. illumination level of approx. 800 lux on the work table. heavy duty exhaust system, comprising of dynamically balanced centrifugal impeller with high speed motor suitable frp ducting of required dimension as per the individual requirements low noise level. energy efficient., digital oil bath with magnetic stirrer - stainless steel, sensor pt, temperature 300 c, high speed rotation 3l, digital oil bath with magnetic stirrer - oil bath 230 x 130 mm 3l, uv chamber - uv viewing cabinetcabinet with removable, combination uv light source (365nm/254nm); 4-watt tubes, lightweight aluminum minicabinet, long- and shortwave irradiation for viewing tlc plates, and for uv fluorescence or absorption,

Central Government/Public Sector

CTN :38549897

31 Jan, 2025 2.59 Crore

Aizawl - Mizoram

Tender For corrigendum : supply of group tender of medical equipment for histopathology, pathology, microbiology and blood bank dept. - grossing station automated , microtome- fully automated , lab incubator , hot air ove , ph meter , hot plate , semi automatic microtome , esr analyzer , embedding station with hot & cold table & paraffin dispenser , tissue floatation bath , lab refrigerator , electronic balance , slide filing cabinet , block filing cabinet , centrifuge , microscope binocular , microscope binocular with illumination & photography , hematology analyzer-3 part , semi automatic coagulometer , fully automated coagulation analyzer , elisa reader with washer , vertical gel electrophoresis system , ultra deep freezer -80 deg c , cytospin , blood donor couch , blood collection monitor , dielectric tube sealer, handheld , refrigerated blood component transport box , (-40) degree deep freezer , vertical deep freezer - 20deg , ultra high speed centrifuge , plasma thawing bath , blood bank refrigerator , blood bag weighting balance- single pan , water bath , blood gas analyser , autoclave , bacteriological incubator , co2 incubator , anaerobic incubator , laminar air flow , bio safety cabinet class ii type b2 , ultrapure water purification system , fully automated colony counter , technical specification for compound microscope for microbiology

Central Government/Public Sector

CTN :38850279

28 Jan, 2025 NA

Sultanpur - Uttar Pradesh

Tender For supply of d38999/20wd35pn, 37-pin circular connector , d38999/26wd35sn, 37-pin non filtered crimp , d3899920fc-35pn, 22 pin male panel mountable connector , d3899926fc-35sn, 22 pin circular connector , d3899933w13r, dustcap connector , m85049/38-13w, back shell of 22pin circular connec , m85049/38-15w, backshell for 37 pin connector , m85049/38-25w, connector backshell , stdn0600-01, st. steel flanged lock nut , stds0306-21, st. steel cheese head , stds0306-51, m2.5* 6 stainless steel pan head , stds0406-51, cross recess pan head screw , stds0408- 51, screw m3x8 cross pan head , stds0410-21, m3 x 10 chhd ss 304 , stds0410-51, screw m3x10 cross recess cheese , stds0416-21, screw st. steel, cheese head , stds0506-51, cross recess pan head screw , stds0508-21, screw cheese head. , stds0508-51, counter sunk screw , stds0610-31, allen head screw , stds0610-51, screw st st m5 x 10 mm stainless , stds0620-21, m5 x 20 slotted chhd , stdt0304-91, st. steel helicoil thread insert , stdt0404-91, helicoil thread insert , stdt0504-91, helicoil thread insert , stdw0400-71, washer (plain) , stdw0400-81, m3 spring washer , stdw0500-71, m4 plain washer ss 304 , stdw0500-81, m4 spring washer

Central Government/Public Sector

CTN :38800672

11 Feb, 2025 NA

Panvel - Maharashtra

Tender For supply of pneumatic heavy duty grinder with i&c , vegetable cutter machine with i&c , electric juicer with i&c , potato / tomato peeler 5 kg cap. per cha with i&c , micro wave oven with i&c , water dispensing unit with i&c , atta grinder with i&c , masala grinder cap 6 to 8 kg with i&c , food service counter with hot & cold ar with i&c , electrical cooking range with i&c , atta kneeding machine with i&c , deep fat fryer with i&c , water boiler / milk boiler with i&c , blender with i&c , 4 door refrigerator with i&c , pulveriser with i&c , electric frying pan with i&c , fridge/krisp cold bottle cooler/ refrige with i&c , gas stove ( hot plate) with i&c , trolly cum stand with i&c , electric ice cream freezer with i&c , ice making machine with i&c , electric oven with i&c , hot air/drying oven with i&c , chapati puffer gas operator model overa* with i&c , insect repellant fly trap with i&c , utensil washer with i&c , bulk cooker gas operator with i&c , milk boiler (s> s> electrical) with i&c , induction stove with i&c , electric griddle plate with i&c , tea/coffee vending machine with i&c

CTN :38753056

30 Jan, 2025 4.26 Lacs

Kozhikode - Kerala

Tender For mhis 2024- 25 procurement of meteorological equipments- srg and fcs equipments in manual gauging stations for replacing the obsolete equipments under hydrology sub division, kozhikode - supplying of rain gauge - non recording, 1.1 conditions & requirements the rain gauge shall be of such a design that it operates reliably and accurately under the prevailing environmental and weather conditions. the rain gauge shall be easy to operate and maintain. the rain gauge shall be supplied with the accessories as needed for effective deployment. all materials on the rain gauge shall be non-corrosive. the locking ring shall be of rigid plastic the rain gauge shall have smooth and permanent surface finish to minimise evaporation losses. the minimum expected lifetime in open field shall be 15 years. all openings of the rain gauge shall be covered with stainless steel net to protect against any insects entering inside. the rain gauge shall comply with is 5225-19921.2 specifications i. 200 cm modelcollecting area 200 cm2id of rim 159.6 mmcollecting bottle 2 litresnominal capacity 100 mmrain measure for 10 mm rainfall, graduation etc. according to is 5225-1992ii. materialsbase and collector preferably frprim of collector aluminium or gun metaliii. accessories collecting bottles of 4 litres for 200 cm2 collector, supplying of sunshine recorder, 2.1 conditions & requirements the sunshine recorder and cards shall comply with is 7243-19742.2 specificationssize base 200 mm, sphere radius 79.6 mmbase good quality marble or similar stone, black or whitesphere uniform and well annealed glass and having a focal length of74.9 0.25 mmbowl tin bronzepivot brass sunshine cards, made of white paste boardproperties when dry after immersion inwater for 18 hours after dryinglength down board 127 mm 127 mm not less than 125.7 mmwidth across board 25.4 mm not more than 25.9 mm not less than 25.1 mmthickness 0.43 to not more than 0.76 mm 0.48 mm, supplying of counter type anemometer, 3.1 conditions & requirements the instrument shall be of such a design that it operates reliably and accurately under the prevailing environmental and weather conditions. the instrument shall be easy to operate and maintain. the instrument shall be supplied with the accessories as needed for effective deployment. all materials on the instrument exterior shall be non-corrosive. the instrument shall have an expected technical lifetime of not less than 10 years. an operator s manual, related to the type and model of the instrument, shall be part of the delivery. a suitable non-reset direct-drive revolution counter adding one count for each one- tenth revolution of the drive shaft in one direction shall be used. the ratio between gears shall be such that 1 count equals 100 m/s. the anemometer shall comply to is 5912-1970.3.2 specificationsi. sensing range 50 m/saccuracy up to 2.5 m/s, 0.25 m/sabove 2.5 m/s, 10% fsii. materialscups copper or aluminium sheet 0.71 mm thicknesscentre spindle stainless steel rodworm on spindle manganese bronze alloyworm wheel hard brass, supplying of hygrograph, hair string type, 4.1 conditions & requirements the general arrangement and main dimensions of the hair hygrograph and charts shallcomply with is 5900-1970.4.2 specificationsrange 0 to 100% rhaccuracy above 20%: 5% rhrecording resolution 0.2% rhhousing material frp or aluminiumrecording mechanism drum, driven by clockwork, supplying of thermograph, bimetallic type, 5.1 conditions & requirements the general arrangement and main dimensions of the thermograph and charts shallcomply with is 5901-19705.2 specificationsrange -20 to 60 caccuracy 1 crecording resolution 0.2 chousing material frp or aluminiumrecording mechanism drum, driven by clockwork, supplying of evaporimeter, us class a pan, 6.1 conditions & requirements the pan shall comply with is 5973 - 1998. civil works will be finalised in collaboration with the supplier.6.2 specificationsi. pansize 1.22 x 0.255 m (diameter x

Aluminium Mug Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector