Latest aluminium stand Tenders | Government aluminium stand Tenders

CTN :39357504

08 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of firing kit - aluminium stand for skill at arms and weapon training , shooting mat for skill at arms and weapon training , firing shoes for skill at arms and weapon training , gloves for skill at arms and weapon training , kit bag for skill at arms and weapon training

State Government

CTN :39277412

24 Feb, 2025 NA

Tirumala - Andhra Pradesh

Tender For supply of electrical fixtures to newly constructed q complex at east side of s v s devasthanam, dwaraka tirumala-, supply of 48" (1200mm) sweep 5 star rated bldc (brush less direct current) ceiling fan with double ball bearings, input voltage 230v ac converted to 24 v dc, power input not more than 32w , air delivery 210/220 cubic meter/min with remote and without regulator. supply and transportation of 60w led high bay/ wall mounted type luminaries with high power cob led made of pressure die cast aluminum housing with powder coated, supply input voltage 120 - 270 v ac, p.f > 0.90, high power led's having efficacy >100 lumens/watt, system efficacy >95lm/w and junction temperature < 70c, with ingres protection ip66, ik05, driver surge protection 4kv, in house additional surge wide/ narrow beam optics, thd<10% at 110 volts ac, driver efficiency >90%, , cct: 3000k - 5700k, minimum cri>70, etc., complete, supply and fixing of 20-24w, not less than 1100mm length led batten light with extruded aluminum housing and polycarbonate cover, input voltage ac 220 - 260 volts with pf>0.9, surge protection: 2kv,thd<15%, with inbuilt driver and frosted cover cct: 3000k - 5700k, minimum cri>70, .etc., complete.

State Government

CTN :38984238

24 Feb, 2025 NA

Udaipur - Rajasthan

Tender For corrigendum : supply of chemicals, glassware, filter papers etc - chemical items, filter papers and glassware items, ammonia solution 25% ar, ammonium chloride ar, ammonium heptamolybdate min. 99.0% of assay", ammonium metavanadate min. 99.0% of assay ", acetic acid glacial 99-100% ar, acetone for analysis ar, ammonium oxalate ar, ammonium dihydrogen ortho phosphate ar, aluminium standard 1000 ppm, ammonium per sulphate ar, barium chloride ar, boric acid ar, buffer solution ph-4.0 amp. (50 ml), buffer solution ph-7.0 amp. (50 ml), buffer solution ph-9.0 amp. (50 ml), chloroform ar, calcium std 1000 ppm ar, citric acid ar, calcium fluoride ar, diethyl ether ar, eriochrome black-t powder ar, edta (di- sodium salt) ar, ferroin indicator ar, ferric chloride ar, ferrous ammonium sulphate ar, glycerol ar, hydrochloric acid lr, hydrofluoric acid ar, hcl ar, hyamine 1622-solution 0.004 n ar, iodine granules ar, iron standard solution 1000 ppm ar, iso propanol ar, manganese sulphate ar, magnesium sulphate ar, magnesium standard 1000 ppm ar, mercuric chloride ar, methyl orange indicator solution ar, monochloroacetic acid ar, methyl red indicator solution ar, nitro benzene ar, nitric acid lr, oleic acid ar, oxalic acid ar, potassium chromate ar, potassium chloride ar, potassium iodide ar, potassium permanganate ar, potassium dichromate ar, potassium hydroxide pellets ar, "potassium dihydrogen orthophosphate min. 99.5 of assay %", patton+reeders reagent new 5g, phenolphthalein solution ph indicator, ortho phosphoric acid ar, perchloric acid 70% lr, petroleum spirit(petroleum ether) boiling range 40-60 c, non volatile matter 0.001% (maximum limit of impurity) ar, sodium chloride ar, stannous chloride ar, silver sulphate ar, sulphurous acid 5-6% so2 ar, sodium fluoride ar, sodium lauryl sulphate ar, starch soluble ar, silver nitrate ar, sulphuric acid lr, strontium chloride min. 99.0% of assay ", sodium hydroxide pellets ar, thymolphthalein solution ph indicator, bromo cresol green indicator ar, sodium dihydrogen phosphate ar, sodium molybdate ar, quinoline ar, tilt measures 5 ml, tilt measures 10 ml, tilt measures 20 ml, beaker with spout 100 ml, beaker with spout 150 ml, beaker with spout 250 ml, beaker with spout 400 ml, beaker with spout 500 ml, beaker with spout 1000 ml, beaker with spout 2000 ml, weighing bottle 5 ml tall form, weighing bottle 15 ml tall form, dropping bottle 30 ml, dropping bottle 60 ml, reagent bottle 500 ml, relative density bottle 10 ml, relative density bottle 25 ml, b.o.d. bottle 300 ml, burette straight bore stopcock 10 ml, a-class, burette straight bore stopcock 25 ml, a-class, burette straight bore stopcock 50 ml, a-class, graham condensor (coil type) 300 mm, crucible silica 15 ml make (vitrosil/ infosil), gooch crucible(g-4), with sintered disc 15 ml, cylinder measuring 10 ml, cylinder measuring 25 ml, cylinder measuring 50 ml, cylinder measuring 100 ml, cylinder with lid 100 ml, petri dishes, flask volumetric 100 ml, b-class, flask volumetric 100 ml, a-class, flask volumetric 250 ml, a-class, flask volumetric 250 ml, b-class, flask volumetric 500 ml, a-class, flask volumetric 500 ml, b-class, flask volumetric 1000 ml, a-class, flask volumetric 2000 ml, a-class, flask volumetric 250 ml, (amber), flask conical 250 ml, flask conical 500 ml, flat bottom flask (boiling) 1000 ml, funnel plan 65 mm dia, funnel plan 75 mm dia, separating funnel 250 ml with glass stopcock, separating funnel 500 ml with glass stopcock, iodine flask 250 ml with glass stopper, pipette transfer 10 ml, a-class, pipette transfer 20 ml, a-class, pipette transfer 25 ml, b-class, pipette transfer 25 ml, a-class, pipette transfer 50 ml, b-class, pipette transfer 50 ml, a-class, pipette measuring 1.0 ml, a-class, pipette measuring 2.0 ml, a-class, pipette measuring 5.0 ml, a-class, pipette measuring 5.0 ml, b-class, watch glass 75 mm (heavy wall), watch glass 100 mm (heavy wall), glass stopper only (flask vol. 100 ml), potassium hydrogen phtha

Central Government / Public Sector

CTN :39265255

03 Mar, 2025 NA

Guntakal - Andhra Pradesh

Tender For supply of led flood light fittings of 200 watts with suitable driver and with all connected materials as per the model no:at_fl_200 of ascentech make consisting the features of luminaires body must be corrosion resistant pow der coated flood light with the luminaires casing/housing shall be spun aluminum/die cast aluminum with higher ther mal conductivity with is: 0322-5:5:2013 or latest and should confirm with cee/scr specification no: scr/led (od)light fittings/003 (amdt-04)2017 with ip66. makes: havells, bajaj, crompton,phillips or similar. as per specification attache d. ]

CTN :39236778

27 Feb, 2025 NA

East Khasi Hills - Meghalaya

Tender For tender for supply of taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete , material and labour powder coated anodised aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified , material and labour powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors , windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is 733 and is 1285 , fixing with dash fasteners of required dia and size , including necessary filling up the gaps at junctions , i.e at top , bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth , rust free , straight , mitred and jointed mechanically wherever required including cleat angle , aluminium snap beading for glazing/ paneling , c.p. brass/ stainless steel screws all complete as per architectural drawings and the directions of engineer in charge. , supply and fix 4.8mm thick sheet glass , ordinary quality and glazing with oil putty in square but n. exc 0.5 sq. m in each pane , supply and fix for metallic aluminium sliding window shutter lock of size 100mm , push to unlock type , concealed handel-cum-latch lock type , completed all as specified and directed , supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to is 1868 with minimum anodic coating of grade ac 15) of approved design/pattern , with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws at the rate of 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening , all complete as per requirement and direction of engineer in charge. , dismantling fillets , rails , posts , rafters , purlins , etc. under 40 sq. cm in section unframed work , dismantling boarding , any description , fixed in any position with nails , material and labour for clean sawn second class hard-wood in scantlings timber fixed , supply and fix 12mm thick block boards , grade 2 quality , interior grade , decorative type with decorative face veneer on both face , fixed with screws to timber frame-work. , supply and fix 30mm width of flaps of continuous (piano) hinges , mild steel , bright finish or electrogalvanised , supply and fix 75mm size brass handles , cast type , polished bright , supply and fix 100mm hasp and staple , safety type , aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws , taking down chowkhats or frames (without taking off shutters from the frames) 1.5 sqm and n exc 4 sqm , supply and fix 2nd class hardwood plain , solid , straight chowkats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue pinned at joints , supplied and fixed size 100x60mm , supply and fix 30mm thick flush shutters , solid core construction , with block board core and plywood face panels , commercial type on both sides both face is covered with deco rative face veneer with lipping/frame to match , supply and fix of 125 mm long mild steel butt hinges , medium weight cold rolled complete all as specified and directed. , supply and fix 150mm aluminium handles , cast type , anodised , supply and fix of 200mm long aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , supply and fix of 200 mm long

CTN :39238003

27 Feb, 2025 NA

Delhi - Delhi

Tender For tender for supply of iodide standard for ic , strontium standard for icp , cesium standard for icp , strontium chloride , aluminium standard for icp , cesium chloride , potassium iodide , aliminium chloride , cobalt chloride , icp multielement standard , tweak , tgf beta 1 , mmp 9 , ccl 5 rantes , p nf kb p50 , beta actin (control) , il 10 , anti mice igg h plus l , pma , phosmet , s0dium hydroxide pellets , sodium lactate 60 percent solution , 2 thiobarbituric acid tba , coomassie brilliant blue g 250 , 5 , 5 , dithiobis 2 nitrobenzoic acid dtnb , sodium citrate , hydrogen per oxide , cupric sulphate pentahydrate , 4 dimethylamino benzaldehyde ehrichs reagent , sodium nitrpruside dihydrate , sodium nittrite , griess reagent , 3 , 3 , 5 , 5 , tetramethylbenzidine tmb , 30 percent acrylamide and bisacrylamide solution , pbs 10 x , tris buffer , glycine , methanol , sodium chloride , graphene oxide nanopowder , hobt anhydrous , n , n dimethylformamide dmf , 1 3 dimethylaminopropyl 3 ethyl carbodiimide hydrochloride , diisopropylamine dipa , l ascorbic acid , isatin , ethanol absolute , bradford reagent , ripa lysis buffer 10x , every blot blocking buffer

Central Government/Public Sector

CTN :39198382

28 Feb, 2025 NA

Mandal - Gujarat

Tender For tmpl/pur/rc/kc-09/ammonia compressor spares/216/330 - crank shaft assembly complete (part no.340.03.001.50 ), bearing bush (std) pump end (part no.082.28.050.50 ), thrust ring bronze (part no. 336.02.004.50 ), thrust ring steel (part no.336.03.005.50 ), driving plate (part no. 082.28.060.50), retaining plate assembly (part no. 336.14.114.50), bearing bush (std) drive end (part no.336.02.003.50 ), connecting rod bolt (part no. 082.04.040.51), bearing intermediate half (std) (part no.086.15.030.50 ), shaft seal (part no.082.08.000.50 ), piston assembly (part no.082.03.000.50 ), plate safety (piston) (part no.082.03.040.50 ), set of piston rings (part no.082.03.150.50 ), big end bearing half std (part no.082.04.030.50 ), gudgeon pin (part no.082.03.020.50 ), connecting rod with bolt (part no.082.04.070.50 ), delivery valve assembly (part no. 336.12.003.50), suction valve spring (part no.336.12.001.50 ), suction valve ring (part no.082.28.130.50 ), suction stroke limiter (part no. 336.12.002.51), cup spring (part no. 336.12.011.50), cylinder liner assembly (part no.336.04.000.50 ), cylinder liner(part no. 336.04.001.51), safety plate (connecting rod) (part no. 082.04.050.50), unloader piston assembly (part no. 336.05.007.50), oil pump assembly (part no. 082.07.000.50), filter wire gauge (part no. 336.10.009.50), paper filter (part no.351.09.014.50 ), suction filter assembly (part no. 336.10.023.50), discharge filter assembly (part no.336.10.031.50 ), tah-8 valve assembly (part no. 351.09.003.50), hex nut (connecting rod nut) (part no. 082. 04. 100 .51), spring (vld piston) (part no.336. 05 .002 .50 ), kit delivery valve ring and springs (part no.085.28.08 ), teflon ring (vld piston) (part no. 336.05.006.50), spring (oil regulator) (part no.082.09.020.50 ), oil level glass (part no.082. 28. 170. 50 ), ball dia 16 (part no. 999. 30 .785. 50), k5 valves (part no. 082. 16.001. 50), stud (short) m16 x35 (part no. 999.03.700.50), stud (long) m16 x65 (part no.999.03.710.50 ), hexagonal hd screw m16x35 (part no. 999.01.690.50), set of safety valve parts (part no.336.13.00 ), kit gasket/ o rings/ all packing for kc-9 compressor (part no. 852801), kit oil pump gear (part no. 0852805), kit liner parts(part no.0852810 ), kit-shaft seal o ring (part no.0852804 ), intermediate bearing assembly (part no.086.15.040.50 ), hex nut m16 (head cover) (part no. 999.06.687.50), bearing cover assembly drive end (part no.336.02.001.50 ), bearing cover assembly pump end (part no.082.02.001.50 ), stud for bearing cover m12 x 125l (part no. 999.03.688.50), stud for bearing cover m12 x 100l (part no. 999.03.683.50), hex nut m12 (part no.999.06.650.50), solenoid valves for kc-9 compressor (part no. 082.25.030.50), key for flywheel / shaft key (part no.082.28.191.50 ), fly wheel / compressor pulley - kc 9 (part no.350.01.033.50), oil return valve (part no. 082.06.000.50), kc buffer springs (part no.080.04.020.50 ), gudgeon pin bush (part no.082.04.020.50 ), piston (part no.080.03.110.50 ), gasket kpgm 3/b (head gasket) (part no.082.28.670.50 ), ring teflon (safety valve) (part no.336.13.002.50 ), aluminum packing set (part no. 082.19.003.50), o-ring set for kc-09 (part no.080.19.005.50 ), gasket set (part no.080.19.001.50 ), gasket round flange 150 nb (part no. 993.00.311.00), hex. head bolt m 10 x 70 (part no. 999.01.655.50 ), housing for piston (part no. 082.10.090.51), shaft seal cover (part no.082.28.160.50 ), spring (leaver) (part no.082.10.050.50 ), springs (oil filter) (part no.336.10.006.50 ), springs (suction filter) (part no.082.12.040.50 ), spring (vld) (part no. 336.05.002.50), curtation spring (part no.082.100.080.50 ), set of pistons & springs (oil pump) (part no. 820706 to 820715), cranck case heater (part no.082.26.173.50 ), ferrule (part no.999.16.001.50 ), union nut (part no. 999.16.063.50), top housing assembly suction (part no.336.10.035.50 ), top housing assembly discharge (part no.336.10.036.50 ), reducing nipple (part no.336.14.111.50

Aluminium Stand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector

Central Government/Public Sector