Get complete information related to latest Aluminium Ventilator Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminium Ventilator Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminium Ventilator Tenders.
Tender For corrigendum : spares of had of mill xrp-903 - 104020202 comp packing gland assly had, complete packing gland assembly for hot air damper (1250x1600) , consists of1) gland plate 6 no. (pl 20x110x176)2) gland 6 no. (od 74 /id 56.5; 32)3) packing rope 1 no. (6mm sq 3.8rm) material code 96-145-0644) bearing holder 6 no. (rod d.55.5;62) ,5)self lubricating bearing 8 no. (sh 0.76x45x142.2) material code 96-145-0636)follower plate 6 no. (pl 40x110x180) material code 15-011-1847) stud and lock nuts, 0104020202 comp set of had shaft xrp903, complete set of hot air dampler shaft, for bowl mill xrp 903, consists of1) drive shaft 1 no. (dia 44.5;739), material code 15-024-1592) slave shaft-i 1 no.(dia 44.5;625), material code 15-024-1593) slave shaft-ii 1 no.(dia 44.5;372), material code 15-024-1594) stub shaft 3 no.(dia 44.5;255), material code 15-024-159, 0104020202 blade pin dia 14 for had,blade pin dia 14;90, 0104020202 shaft collar dia 44.5 for had, shaft collar dia 44.5 material code 96-145-040, 0104020202 sh 1.6 (od106/id47) for had, sh 1.6 od 106/ id 47 material code 15-011-350
Tender For tender for supply of spares for air compressor - split pin , part no - 1903 5109 13 , hex nut , part no - 1903 2054 13 , o- ring for breather , part no - 0663 2110 26 , roll pin , part no - 0108 1365 00 , gasket for door , part no - 1901 0038 12 , packing ring , part no - 1903 1455 08 , intermediate ring , part no - 1901 0062 79 , stud , part no - 1903 3476 13 , distance bush sleeve , part no - 1901 0062 80 , hex nut , part no - 1903 2050 13 , a1 washer , part no - 1903 0741 08 , inner head , part no - 1903 0590 02 , o- ring , part no - 1903 0212 08 , o- ring , part no - 1903 0210 08 , piston , part no - 1903 0902 02 , copper gasket , part no - 1903 3624 13 , gasket , part no - 1903 1082 08 , o- ring , part no - 1903 0209 08 , packing sleeve (v- seal) , part no - 1901 0615 37 , pullrod , part no - 1901 0025 91 , backing ring for piston rod , part no - 1901 0085 27 , piston half (c.s. end) , part no - 1903 0929 02 , piston ring , part no - 1903 3975 08 , stud , part no - 1901 0028 72 , intermediate sleeve , part no - 1903 6647 03 , piston half (nut end) , part no - 1903 0982 02 , valve plate , part no - 1903 2225 05 , spring plate , part no - 1903 2227 05 , lift washer , part no - 1903 1004 08 , split pin , part no - 1903 5108 13 , spring plate , part no - 1903 2249 05 , gasket , part no - 1903 0730 08 , screw m5-10 , part no - 1903 2844 13 , gasket (seal) for inspectn door , part no - 1901 0044 76 , breather , part no - 1903 6110 03 , o- ring , part no - 1903 0213 08 , damper plate , part no - 1903 2226 05 , stud for oil filter , part no - 1903 7905 04 , o- ring , part no - 1903 0215 08 , discharge valve assembly , part no - 1903 2543 90 , gasket , part no - 1903 0737 08 , aftercooler for vert. package , part no - 1903 6148 11 , packing sleeve , part no - 0666 6000 51 , hx1t 30np/npd 9kg/cm2g , part no - 1903 2252 22 , connecting rod bolt , part no - 1903 3036 04 , small end bush , part no - 1901 0000 53 , suction valve proton grill , part no - 1901 0038 47 , cylinder , part no - 1901 0040 20 , oil wiper ring , part no - 1903 1459 08 , crank shaft , part no - 1903 4325 02 , helical compression spring , part no - 1903 3477 08 , suction valve assembly , part no - 1903 2540 90 , bearing bush , part no - 1901 0000 51 , packing sleeve , part no - 1903 9638 04 , valve service kit , part no - 1903 0054 95 , cross head pin , part no - 1901 0041 67 , thrust washer , part no - 1901 0041 56 , helilock nut , part no - 1903 2062 13 , tension nut , part no - 1903 6718 03 , bearing bush , part no - 1901 0000 52 , paper gasket , part no - 1901 0037 73 , piston ring replacement kit , part no - 1903 0094 95 , filter , part no - 1903 0851 11 , crosshead , part no - 1901 0702 05 , clut adjustment finger (lifter) , part no - 1901 0040 17 , hex head screw , part no - 0147 1204 03 , washer , part no - 1903 3623 13 , circlip , part no - 0335 2141 00 , paper gasket , part no - 1901 0037 72 , rider ring , part no - 1903 3976 08 , oil filter , part no - 1903 0612 11 , clut fingercheek (lifter guide) , part no - 1901 0038 46 , washer , part no - 1903 3622 13 , connecting rod , part no - 1901 0071 10 , gasket for suction valve cover , part no - 1903 0738 08 , sleeve , part no - 1903 9636 04 , oil pump assembly , part no - 1903 9361 90 , cross head nut , part no - 1901 0029 24 , lock sleeve , part no - 1901 0028 15 , valve service kit , part no - 1903 0051 95
Tender For supply of set of bogie and superstructure items. 01 set consists of three items. (1) mounting leg assem bly (soft mount) for main compressor under slung as per clw drg. no. 1209-02.327-056 alt-1 or latest with necessary gussets/support plates for wag-9 (3- phase) locomotives. note: thickness of soft mount leg is e qual or more than 5.4mm. qty- 08 nos./set. (2) fixing bracket for damper mounted on bogie frame as per c lw drg. no. 1209.01.412.050 qty-20 nos./set. (3) air dryer base assembly, qty- 04 nos./set. [ warranty p eriod: 30 months after the date of delivery ]
Tender For corrigendum : special repair for renewel of e/m items and plant/ machinery held in charge of age (e/m) rnd agra cantt under ge (i) rnd delhi - supply , installatation , testing and commissioning of diesel driven generating set to give an out put of 500 kva, 415v ac supply 3 phase, 50 hz, 4 wire radiator mounted on common base plate complete with fuel tank, vibration damper and other accessories with fuel tank viberation damper and other accessories with acoustic enclouser as per latest cpcb-iv norms and amf panel including pcc foundation work as per oem reccommandation and taking out the old dg set from the location and deposited to mes store yard complete all as specified and directed, interanally comprising of following :-(a) diesel driven engine :- developing a net output suitable matched to give a net rated output of minimum 604 hp/suitable to drive 500 kva alternator, at 0.8 power factor 415 volts. the engine should be capable of delivering the required output at 1500 rpm, water cooled, self start, with a provision of 10% overload for one hour in every 12 hours with the following accessories and all as specified.(i) fly wheel to suit flexible coupling and fly wheel housing.(ii) air cleaner complete as per manufacturer specification. (iii) fuel injection pump. (iv) flexible coupling with guard, nuts and bolts.(v) fuel filter with mounting. (vi) oil filter with mounting.(vii) starter motor as per manufactures design.(viii) exhaust, silencer industrial type with exhaust pipe suitable length.(ix) batteries 12 volts 2x180 ah maintenance free batteries with copper lead, terminals etc.(x) instrument panel complete with microprocessor based controller comprising shut down valve indication, lcd hour counter indication, rpm indication , led lamps for fail to start, over speed /under speed . low lub oil pressure, high engine coolant temperature. gaugae.(xi) dynamo/alternator suitable rating., (b) alternator :-the above engine will be coupled through flexible coupling on an indigenous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclousre. the alternator will be 3 phase 50 hz 1500 rpm self regulating self exciting type and have class h insulation of stator and rotor windings and generate 500 kva output at .8 power factor 4 wire 415 volts ac supply under ntp condition with a provision of 10% overload for 1 hour in every 12 hrs running. the alternator would be screen protected and fitted with shield ball/roller bearing, automatic voltage regulator.(c) control panel :- s&f amf (automatic on mains failure) control panel cpri approved outdoor ype kiosk water, dust and vermin proof and fabricated out of 3.15 mm thick crca sheet and 50mm x 50mm x 6mm angle iron powder coated suitable for 415 volts 3 phase 50 hz ac supply with and incl the following :-(i) mccb of suitable capacity(ii) necessary relays, times and power contractors of suitable rating/capacity for auto on-off the dg set and changeover of the load in case of power failure.(iii) digital mulfifunctional meter for phase wise reading of amps, voltage kwh and frequency -01(iv) internal wriring with single core solid copper conductor cable of appropriae gauge incl mumbering ferrules and control fuses.(v) earthing terminals 02 nos(vi) auto/manual start switch to by pass auto start.(vii) battery charging system suitable for charging for charging the battery provided with the dg set incl boost/stickle switch and system, dc voltmeter digital type., (d) fuel tank :- one no built in sheet metal steel tank mounted inside the acoustic encloser and of adequate capacitynot less than 740 ltr with inlet and outlet connection including the following :-(i) level indicator with float and gauge.(ii) fuel piping for fuel supply to engine and over flow to tank(iii) fuel strainer(e) acoustic enclosure :- enclousre be designed for reducing the sound level up to 75+/ 5db (average) as per is 8528 part 10 and as per approved cpcb morms. the acous
Tender For supply of spares for kg khosla ir elgi compressor - crank shaft _pt.no.35172060 , cross head pt.no.35176040 , cross head guide pt.no.35262041 , connecting rod with bolts pt.no.35364040 , rod piston pt.no.35328041 , bush main bearing pt.no.35110120 , big end bearing pt.no.35110100 , gudgeon pin pt.no.35322080 , bush small end pt.no.35138080 , piston aluminum 250 d pt.no.35320390 , piston aluminum 160 d pt.no.35320160 , piston ring 250 d pt.no.35324280 , piston ring 160 d pt.no.35324080 , suction valve 1st stage pt.no.35050280 , suction valve 2nd stage pt.no.35050320 , delivery valve 1st stage pt.no.35050040 , delivery valve 2nd stage pt.no.35050080 , bell suction valve pt.no.35112100 , bell delivery valve pt.no.35112040 , cover suction valve pt.no.35164100 , cover delivery valve pt.no.35164040 , thrust washer pt.no.23632700 , pump oil pt.no.35028040 , silicon o ring pt.no.24540362 , silicon o ring for un_loader piston pt.no.24541190 , crank shaft pt.no.45172240 , connecting rod pt.no.45364100 , cross head pt.no.49097010 , cross head guide pt.no.45262120 , piston half 250 d pt.no.45320360 , ring piston compression 250 d pt.no.35324280 , rod piston pt.no.45328080 , big end bearing pt.no.45110120 , bush main bearing pt.no.45138150 , bush small end pt.no.45138240 , gudgeon pin pt.no.49235010 , gland packing ring pt.no.35296041j , thrust washer pt.no.23633000 , bolt connecting rod pt.no.21605000 , jib head key pt.no.45274080a , pump oil pt.no.45028080 , oil strainer d 15 pt.no.36187400 , reatiner oil pt.no.36060080 , nut blocking pt.no.22002600 , studs with nut pt.no.22228420 , bearing housing pump side pt.no.45270260 , bearing housing fly wheel side pt.no.45270240 , valve suction pt.no.35050280w , valve delivery pt.no.35050040y , bell delivery valve_ pt.no.35112040 , silicon o ring pt.no.35360540h , silicon o ring for un loader piston pt.no.35360540h , connecting rod crank shaft assembly pt.no.211702 , gp bush 100mm dia pt.no.321210 , piston assembly 100mm dia pt.no.477770 , valve plate finger type 100mm dia pt.no.330970 , cylinder 70mm dia pt.no.210090 , piston ring sets 70mm dia pt.no.22401049 , internal circlip b18 pt.no.917218 , internal circlip b20 pt.no.917220 , valve cone guide pt.no.20491279 , fan pulley pt.no.20351170 , connecting rod crank shaft assembly pt.no.211307 , piston assembly 100mm dia pt.no.20494560 , piston assembly 60mm dia pt.no.413120 , piston ring set 100mm dia pt.no.22401059 , piston ring set 60mm dia pt.no.22401039 , valve plate finger type 60mm dia pt.no.330950 , after cooler pipe with ermeto cons pt.no.333720 , inter cooler pt.no.310091 , diaphram for breather pt.no.510060 , dry type filter elements pt.no.317820 , packing ring 30 x 38 x 2mm pt.no.521910 , oil level indicator pt.no.513440 , assembly crank shaft complete pt.no.32293565 , connecting rod assy pt.no.32004152 , cylinder pt.no.32293540 , cylinder 2.5 pt.no.32247652 , piston air complete pt.no.32293516 , piston air complete pt.no.32293532 , set piston ring hp pt.no.32307910 , set piston ring lp pt.no.32307928 , assy. valve plate hp pt.no.32310799 , assy. valve plate lp pt.no.32248205 , valve finger inlet hp pt.no.32236671 , valve finger discharge hp pt.no.32241010 , valve damper discharge hp pt.no.32295479 , valve finger inlet lp pt.no.32248130 , valve finger discharge lp pt.no.32248155 , valve damper discharge lp pt.no.32294464 , tune up kit pt.no.70241955 , valve relief 60 psig pt.no.70243245 , o ring valve plate high pressure pt.no.32246878 , element filter pt.no.32170979 , elbow tube pt.no.95031761 , gasket set pt.no.32301434 , assembly connecting rod , piston complete assembly , set piston ring pt.no.w114364t17 , set piston ring pt.no.w114364t37 , check valve assembly complete , gasket set
Tender For procurement of spare items of hvac system installed at hurl sindri plant - v belt - b 114 , v belt - spb 3150 , v belt - c 207 , v belt - b 144 , v belt - b 124 , v belt - b 89 , v belt - b 145 , v belt - b 88 , v belt - b 121 , v belt - b 80 , v belt - b 70 , v belt - spb 2980 , v belt - b 128 , v belt - a 28 , v belt - spb 3550 , v belt - b-98 , pre filter (610x610x50 mm), flange type , pre filter (305x610x50 mm), flange type , pre filter (610x610x50 mm) -box type , pre filter (610x305x50 mm)- box type , pre filter (305x305x50 mm)- box type , pre filter ( l x b - 1252 x 688 mm) , pre filter(l x b -1450 x 435 mm),3 fold , mini pleat(fine filter)-(610x610x100 mm) , mini pleat(fine filter)- (610x305x100mm) , mini pleat (fine filter)-(305x305x100mm) , fine filter(l x b x h -610x610x305 mm) , fine filter(l x b x h -610x305x305 mm) , fine filter(l x b x h -305x305x305 mm) , air bag filter(l xb - 610 x 610 mm) , air bag filter(l x b -610 x 305 mm) , cell deck pads -(3000 x 2000 x 300 mm) , cell deck pads -(3900 x 1800 x 300 mm) , cell deck pads -( 3900 x 1500 x 300 mm) , cell deck pads -(3000 x 1200 x 300 mm) , cell deck pads -(2400 x 2000 x 300 mm) , cell deck pads -(3900 x 1600 x 300 mm) , cell deck pads -(1900 x 1700 x 300 mm) , cell deck pads -(3100 x 2400 x 300 mm) , blower bearing fyh- p218 , blower bearing fyh- p216 , blower bearing fyh- p212 , blower bearing fyh- p213 , blower bearing aec-sn610 , blower bearing aec-sn609 , motor pully 3020-60 , motor pully 2517-48 , motor pully 2517-42 , motor pully 2012-38 , blower pully 4040-80 , blower pully 5020-70 , blower pully 3020-55 , blower pully 2012-40 , pressure gauge (0-6) kg/cm2, dial type , pressure gauge (0-10) kg/cm2, dial type , temperature gauge(0-50) deg c',dial type , temperature gauge(0-80) deg c',dial type , motor bearing 6313-c3 , motor bearing 6310-c3 , motor bearing 6309-c3 , motor bearing 6308zz , motor bearing 6208zz , motor bearing 6310-zz , motor bearing 6210zz , motor bearing 6312zz , motor bearing 6212zz , motor bearing 6309zz , motor bearing 6209zz , motor bearing 6205zz , motor bearing 6204zz , motor bearing 6208c3 , motor bearing 6319c3 , motor bearing 6315c3 , motor bearing 6209c3 , motor bearing 6306zz , motor bearing 6314c3 , motor bearing 6322c3 , butterfly valve 200mm/8 inch diameter , butterfly valve 150 mm/ 6 inch diameter , butterfly valve 100 mm / 4 inch diameter , butterfly valve 75 mm / 3 inch diameter , butterfly valve 50 mm / 2 inch diameter , globe valve 200mm/8 inch diameter , globe valve 150mm/ 6 inch diameter , globe valve 100mm/ 4 inch diameter , globe valve 75mm/ 3 inch diameter , globe valve 50 mm/ 2 inch diameter , globe valve 1.5 inch diameter , globe valve 0.5 inch diameter , gate valve 2 inch diameter , gate valve 1.5 inch diameter , gate valve 1 inch diameter , gate valve 0.5 inch diameter , ball valve 2 inch diameter , ball valve 1.5 inch diameter , ball valve 1 inch diameter , ball valve 0.5 inch diameter , y- strainer , size : 150mm , y- strainer , size : 75mm , scroll compressor:zr144kfe-tfd-522,11 tr , scroll compressor : zr108kfe-tfd-522 , compressor : cr42k6m-tfm-101dm , danfoss kp15 pressure switch( 0.7-4bar) , motorised valve, size 200nm , motorised valve, size 150nm , motorised valve, size 100nm , motorised valve, size 75nm , mov actuator, type: q300 f10,make:rotork , mov actuator,type : q100 f05,make-rotork , mov actuator, model: rom2, make: rotork , mov actuator, model: rom1, make : rotork , power contactor,model:3tf50,make:siemens , power contactor,make-siemens,model:3ts50 , power contactor,make-siemens,model:3ts36 , mccb, make- siemens, model : 3vt3 , three way valve, 80nb, pn :16 , three way valve, 125nb, pn : 16 , actuator for three way valve,model:sbv61 , actuator for three way valve,model:sbx61 , damper (1145x 1140 x 150mm)for cfm 22500 , damper (1270x 1270 x 160mm)for cfm 27500 , actuator for damper,model : sfa-s2, 20nm , actuator for damper,model: nf24a-s2,10nm