Latest aluminum alloy plate Tenders | Government aluminum alloy plate Tenders

Central Government And Public Sector

CTN :42213775

31 Oct, 2025 7.80 Lacs

Guwahati - Assam

Tender For supply of supplying of out door type 160 kva step down transformer , itc of the above transformer , providing and laying in position cement concrete foundation , supplying and erection of three piece nonlinear resistor type lightning arrestor , providing and fixing 11kv triple pole post gang operated air break switch , supplying and fixing 11 kv do fuse , providing and fixing ht danger notice plate , providing and fixing mv danger notice plate , earthing with gi earth plate , providing and fixing loop earthing in gi pipe , providing and fixing loop earthing , earthing with gi earth pipe , providing and laying earth connection , loop earthing , supplying of steel armoured aluminum conductor ug power cable , laying and fixing of power cable on wall surface , supplying and making end termination , repairing and painting the entire dp , making inter connection . , supplying and fixing , dismantling of existing transformers , providing fabricating and fixing iron fencing or railing on boundary wall or ground for sub station area

CTN :42228426

24 Oct, 2025 NA

Mumbai - Maharashtra

Tender For supply of supply install testing and commissioning of dg set of 40 kva 1 supply install testing and commissioning of silent (acoustics enclossure as per cpcb iv norms) diesel engine driven generating set capable of delivering 40 kva, 55.6 amps, 415 volts, 3 phase, 4 wire system, 1500 rpm directly coupled to diesel engine, mounted on common base plate, vibration damper with amf panel suitable for 40 kva dg set alongwith connected accessories, relays, engine as per is/10002/bs :5514, iso 3046 and alternator as per is : 4722, bs 5000, generator prime rating as per iso : 8528 complete with relay panel for automatic starting on main failure, control panel having meters, sound proof canopy with avr control excitation, power factor 0.8, with suitable rated battaery with acoustic enclossure fabricated out of 1.6 mm crca steel after nine tank process, surface pre-treated with foam materials confirming to is7888/is 8183and pure polyster powder coating complete as per cpcb-iv norms, sound level 75 db(a) at one metre from enclossure a surface in free field condition as per iso 8528 suitable for using with anf system and foundation etc complete all as specified and as directed by engineer-in-charge and comprising of the following. dg microprocessor based amf control panel, out door type ip-54 rated, inclined top, double door fabricated out of 16 swg crca sheet withpowder coating, cubicle compartmentalised, free standing, dust and virmin proof with re inforcement of suitable size angle iron and channel, galvenised hardwarewith zinc passivation, t sections whwerever necessary including bottom channel supports etc fully meeting all the requirements specified in the inspectorate specifications foundation with pcc 1:2:4 type b1 (using 20 mm graded aggregate) etc complete. amf circuit system :- amf logic panel shall be suitable for ) /bid number : gem/2025/b/6618207 * /dated: 10-10-2025 & & / bid document 1 / 11

State Government

CTN :42212887

15 Oct, 2025 73.9 Thousand

Mandi - Himachal Pradesh

Tender For providing and laying cement concrete foundation for unit no three governor and providing ms chequered plate platform form turbine p p set of unit no two and three of larji hep

State Government

CTN :41867833

08 Oct, 2025 NA

Chandigarh - Chandigarh

Tender For corrigendum : machinery and equipment of electrician trade - schedule 1, discrete component trainer, linear i.c. trainer, digital i.c. trainer, electrical machine trainer , schedule 2, a. electric induction plate, b. electric kettle, c. electric iron, d. immersion heater, e. a.c. ceiling fan and ac table fan, f. geyser (storage type), g. mixture & grinder, h. washing machine semi-automatic, i. motor pump set, voltage stabilizer, inverter with battery, schedule 3, current transformer, potential transformer, dc series motor coupled with spring balance load, dc shunt motor, dc compound motor with starter and switch, ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., ac phase-wound slip ring motor with starter switch, universal motor with starter/switch, synchronous motor with accessories like starter, excitation arrangements., thyristor /igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor/igbt controlled a.c. motor drive with, single phase transformer, core type, air cooled, three phase transformer, shell type oil cooled with delta/ star, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, ceiling fan coil winding machine, stepper motor with digital controller, shaded pole motor, schedule 4, dc power supply, solar panel with battery, smart meter, ev charger, ev charger (home), battery charger, schedule 5, oil testing kit, primary current injection set, schedule 6, d.c. shunt generator with control panel, motor-generator (ac to dc), d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bedplate, fixing bolts, foundation bolts and flexible coupling., diesel generator set with changeover switch, over current breaker and water/ air-cooled with armature, star-delta connections ac 3 phase

CTN :42161619

13 Oct, 2025 92.84 Lacs

Solapur - Maharashtra

Tender For kmip lis 2 stage 2 balance work of padsali pump house (internal wire mesh to windows, chequered plate flooring of pump floor slab, providing and laying murum for foundation below manifold, concrete work on apex portion of escape canal near padsali ph

CTN :42132753

13 Oct, 2025 NA

Ananthnag - Jammu And Kashmir

Tender For supply of spares for stone crusher akona 6 by 10 tph - ajcw-1510-02-044, fixed jaw plate , ajas-1510-03-056, swing jaw plate , ajed-151005080, v belt c215 fly to eng , ajas-151003048, spring tie rod , ajas-151003052, tie rod bolt , ajas-151003051, spring , ajmf-151007127, screen bearing nut bolt , ajmf-151007104, body foundation nut bolt , ajrs-151004079, pedestal bearing , 48.145.02.0.00, air cleaner filter , ajcw-151002039, vez block nut bolt , ajcw-151002040, toggle block nut bolt , ajcw-151002029, cam shaft bracket , ajas-151003049, tie rod nut , ajas- 151003050, spring plate , ajed-151005130, clutch plate , ajed-151005129, pressure plate , ajed-151005131, clutch release bearing , ajed-151005089, clutch shaft , ajed- 151005091, housing cap , ajed-151005092, bearing 6310 , ajed-151005093, bearing 6204 , ajmf-151007110, bracket cover nut bolt , ajmf-151007111, bracket nut bolt , ajmf- 151007112, toggle block nut bolt , ajmf-151007113, vez block nut bolt , ajmf-151007116, eng mounting nut bolt , ajas-151003057, fly wheel groove , 9440030028, fuel feed pump assy , ajrs-151004071, screen pully , ajrs- 151004076, pinion shaft , nk, pinion shaft key , 4.367.01.0.00, alternator assy ) /bid number : gem/2025/b/6678687 * /dated: 03-10-2025 & & / bid document 1 / 26

Central Government/Public Sector

CTN :40672941

06 Oct, 2025 NA

Haridwar - Uttarakhand

Tender For tender for supply of aluminum alloy e e - aluminium square tube 40 x 40 x 3 grade- en aw 6060 t6 en 754-2 requirements - material test certificate(mtc) as per en 754-2 . standard -en 754 size- sq. tube 40x40x3 , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-15 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 n.std-en 485-2 size- thk-15 mm dim.- thk-15 mm , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-42 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 n.std-en 485-2 size- thk-42 mm dim.- thk-42 mm , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-12 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 n.std-en 485-2 size- thk-12 mm dim.- thk-12 mm , aluminum alloy lega en aw6082 , t6 , en 485-2 , t-10 mm (positive tolerance in thickness up to 5% acceptable) , requirements - material test certificate (mtc) as per en 485-2 standard- en 485-2 size- t-10mm , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-30 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 n.std-en 485-2 size- thk-30 mm dim.- thk-30 mm , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-6.35 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 n.std-en 485-2 size- t-6.35 mm dim.- t-6.35 mm , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-18 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 n.std-en 485-2 size- thk-18 mm dim.- thk-18 mm , aluminium alloy round of dia 65mm , material en al6082 t6 en485-2. size- dia-65mm , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-5 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 size- thk-5 mm , aluminum alloy en aw-7075 , alzn5.5mgcu t6 , en 485-2 , t-50mm , requirements - material test certificate (mtc) as per en 485-2 , standard- en 485-2 size- t-50mm , aluminum alloy en aw-7075 , alzn5.5mgcut62 , en 485-2 , t-25 mm (positive tolerance in thickness up to 5% acceptable) , requirements - material test certificate (mtc) as per en 485-2 standard- en 485-2 size- t-25mm , aluminium alloy plate thicknes 20mm , material en al 5083 h112 en 485-2. size- thickness-20mm dim.- t-20mm , aluminum alloy en aw-7075 , alzn5.5mgcut62 , en 485-2 , t-90 mm (positive tolerance in thickness up to 5% acceptable) , requirements - material test certificate (mtc) as per en 485-2 standard- en 485-2 size- t-90mm , aluminum alloy lega en aw6082 , t6 , uni en 485-2 , t-25 mm (positive tolerance in thickness up to 5% acceptable) , requirements - material test certificate (mtc) as per en 485-2 standard- uni en 485-2 size- t-25mm , aluminium alloy plate thicknes 4mm , material en al 5083 h112 en 485-2. size- thickness-4mm dim.- 4mm thicknes

State Government

CTN :42061405

06 Oct, 2025 NA

Ernakulam - Kerala

Tender For purchases for open gymnasium - purchase of items for open gym, air walker,pipe make:- jindal / tata,combination equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e. internal diameter of pipe in millimeters.100mm nb:- main frame. 80mm nb:- standing twister support. 32mm nb:- air walker pedal, leg press seat, standing twister base, support. 25mm nb:- leg press footrest support, air walker handle, standing twister handle.c channel of 38 x 73 x 4.5mm:- bottom support frame.ms plate of 8mm:- leg press profile, air walker pedal l-bend. 60mm seamless pipe:- bushes. 70mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. ms plate of 245 x 113 x 2.8mm:- footrest support. ms round plate of 298 x 9mm:- standing twister plate. hdpe / ppcp plastic:- closing caps, leg press footrest. ms bright material:- pins made of 35mm, 25mm. bearings:- permanent lubricated bearings 6007 , 6205 of reputed brand are used. bearings end cap:- made up from nylon material. stopper:- stopper (bushes) used are made from poly urethin material of 50mm. nut & bolts:- high tensile steel with galvanised nut & bolts are used. circlips:- the circlips are used for locking is made up of a34, a24 & a16. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., chest press, length:- 1550mm, width:- 710mm, height:- 2150mm, safe area:- 3.0 mtr x 1.7 mtr, chest press equipment made up of b class gi pipe of different nb. nb stands for nominal bore size i.e.internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- foundation main pipe. 32mm nb:- handle frame duly bend, seat frame duly bend, support. 25mm nb:- connecting links, handle. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. 50mm seamless pipe:- bushes. 60mm seamless pipe:- bushes. ms sheet of size 330 x 300 x 1.8mm:- seat and backrest. hdpe / ppcp plastic:- closing caps, base cover. ms bright material:- pins made of dia.25mm & dia.17mm. bearings:- permanent lubricated bearings 6205 & 6203 of reputed brand are used. bearings end cap:- made up from nylon material. nut & bolts:- high tensile steel with galvanized nut & bolts are used. circlips:- the circlips are used for locking is made up of a24 & a16. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonoble or berger with 60 to 70 micron thickness., double standing twister,length:- 1800mm, width:- 540mm, height:- 1430mm, safe area:- 3.0 mtr x 1.0 mtr, seating & standing twister equipment made up of b class gi pipe of different nb.nb stands for nominal bore size i.e. internal diameter of pipe in millimeters. 100mm nb:- centre pipe. 80mm nb:- standing twister plate support, foundation main pipe. 50mm nb:- seating twister plate support. 32mm nb:- bottom frame, support. 25mm nb:- handle frame ring, foot resting frame. dia. 125mm od with 5mm thickness:- handle sleeve pipe. ms angle 23 x 23 x 1.8mm:- foundation support frame. ms pipe 19 x 38 x 1.8mm:- foundation support frame. ms round plate of 298 x 9mm:- twister plate. 70mm seamless pipe:- bushes. ms flat 38 x 9mm:- bottom frame. hdpe / ppcp plastic:- closing caps. ms bright material:- pins made of dia.45mm & dia.35mm. bearings:- permanent lubricated bearings 30206 , 6205 & 6007 of reputed brand are used. nut & bolts:- high tensile steel with galvanized nut & bolts are used. handle grips:- handle grips are made up of high quality rubber material. powder coating:- the powder coating done with pure polyster powder of ackzonobleor berger with 60 to 70 micron thickness., leg press, length:- 1700mm, width:- 380mm, height:- 1550mm, safe area:- 2.8 mtr x 1.4 mtr, leg press made up of b class gi pipe of different nb. nb stands for nominal,bore size i.e. internal diameter of pipe in

corporations/Associations/Others

CTN :41508588

14 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c