Get complete information related to latest Aluminum Board Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminum Board Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminum Board Tenders.
Tender For providing electrical supply to newly installed acs in various class of govt. model senior secondary school, school-16-d,chandigarh. - dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, triple pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 4 way (4 + 12) double door, dsr item no.14.16 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 160 mm dia (od-160 mm & id-135 mm nominal), providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36-55 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 4 of the dnit)., 100 amp 4 pole 36 ka mccb (thermal magnetic release)., 250 amp 4 pole 36 ka mccb (thermal magnetic release)., 400 amp 4 pole 50/ 55 ka mccb (microprocessor release) with lsig protection., supply and laying of xlpe insulated pvc sheathed aluminium conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of m.s. clamp of suitable thickness. (as per complete item no. 5 of the dnit)., size 35 sq.mm 3.5 core xlpe al. arm. cond. cable, size 25 sq.mm 3.5 core xlpe al. arm. cond. cable, supply and laying of xlpe insulated pvc sheathed aluminum conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid in existing rcc/hume/dwc/ metal pipe. (as per complete item no. 6 of the dnit)., size 300 sq.mm 3.5 core xlpe al. arm. cond. cable, supply, erection testing and commissioning of l.t. cubical panel indoor type with degree of protection ip 54 fabricated from 14 gms (2mm) thick crca sheet and ms flat, (as per complete item no. 7 of the dnit)., 01 no. lt panel approx. size 1150 mm x 2400 mm
Tender For dma/hvr/2025-26/water supply materials annual maitainance/ts - for 25 mm dia gi collar , for 32 mm dia gi collar , for 50 mm dia gi collar , electro fusion coupler 63 mm, electro fusion coupler 75 mm, electro fusion coupler 90 mm, electro fusion tee 63 mm , electro fusion tee 75 mm , electro fusion tee 90 mm , electro fusion elbow 63 mm , electro fusion elbow 75 mm , electro fusion elbow 90 mm , electro fusion reducer 90x63 mm , electro fusion reducer 75x63 mm , stainer 80 mm, m.s. flange 3 inch, cpv fta 0.5, cpve elbow brass 0.5 , compression mta 63 mm , compression mta 75 mm, compression mta 90 mm , pvc insulated cable of flat 3 core (sheathed) 1x3x1.5 sqm, sqm pvc insulated cable of flat 3 core (sheathed) 1x3x2.5, pvc insulated cable of flat 3 core (sheathed) 1x3x4 sqm, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000 3phase, ss bowl and impeller with low volt motor as per specifications,6.50 hp - 135 lpm at 110 m equals to 12 stg outlet dia - 2.00 inch , gi union 20.88.4 32 mm nominal bore , gi union 20.88.6 50 mm nominal bore , for 20 mm dia gi collar , pvc tee 180 mm dia , pvc tee 200 mm dia , pvc bend 25 mm dia , pvc bend 32 mm dia , pvc bend 40 mm dia , pvc bend 63 mm dia , pvc bend 180 mm dia , pvc bend 200 mm dia , pvc service saddles 25 mm dia , pvc service saddles 32 mm dia , pvc service saddles 110 mm dia , pvc service saddles 140 mm dia , pvc service saddles 160 mm dia , pvc service saddles 180 mm dia , pvc service saddles 200 mm dia , pvc reducer 25 mm dia, pvc reducer 32 mm dia , pvc reducer 40 mm dia , pvc reducer 140 mm dia , pvc reducer 160 mm dia , pvc reducer 180 mm dia , pvc reducer 200 mm dia , chlorinated polyvinyl - chloride (cpvc) pipe 32 mm nominal dia. , brass bib-cock 15 mm dia , brass bib-cock 20 mm dia , coconut broom stick , coir brushes , enamel paint , pvc couplers 25mm dia , dry distemper , nuts and bolts , ms flanges of 100mm dia and 8mm thick. , ms flanges of 150mm dia and 12mm thick. , pvc couplers 32mm dia , ms flanges of 200mm dia and 16mm thick. , ms flanges of 250mm dia and 16mm thick. , ms flanges of 300mm dia and 16mm thick. , providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications 2 hp 1.5kw-25 stage, electrical & automation aluminum alloy dol starter, power 4 horsepower 3phase l&t,siemens equvilent, electrical & automation aluminum alloy dol starter, power 4 horsepower single phase l&t,siemens equvilent, pvc couplers 40mm dia , pvc couplers 50mm dia , pvc couplers 90mm dia , pvc couplers 160mm dia , pvc couplers 180mm dia , pvc tee 32 mm dia, pvc tee 140 mm dia , for 20 mm dia gi elbow , for 25 mm dia gi elbow , for 32 mm dia gi elbow , for 50 mm dia gi elbow , for 20 mm dia gi bend , for 25 mm dia gi bend , for 32 mm dia gi bend , for 50 mm dia gi bend , for 20 mm dia gi tee , for 25 mm dia gi tee , for 32 mm dia gi tee , for 50 mm dia gi tee , for 20 mm dia gi socket , for 25 mm dia gi socket , for 32 mm dia gi socket , for 50 mm dia gi socket , for 15 mm dia gm gland cocks , for 20 mm dia gm gland cocks , providing and laying of warning tape / caution tape / detector tape for hdpe pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant iss with latest amendments with appurtenances., complete, size 50 mm gate valve, size 50 mm non-return valve, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm nominal dia. , chlorinated polyvinyl - chloride (cpvc) pipe 25 mm nominal dia. , medium duty gi pipe of 32mm dia , medium duty gi pipe of 50mm dia , pvc pipes of 6 kg/cm2 for 110mm(1.894) , pvc pipes of 6 kg/cm2 for 160mm(3.923) , pvc pipes of 6 kg/cm2 for 200mm(6.233) , rcc pipe np3 600 mm dia & 2.5 m long , rubber gasket sbr quality 450mm dia. , upvc pipe is 16098 sn 4 - 110mm dia , hdpe pipe grade pe80-pn6.0, 75mm , hdpe pipe grade pe80-pn6.0, 90mm , hdpe pipe grade pe80-pn6.0, 110mm , providing and fixing ms casing collar
Tender For supply of prosthetics and orthotics 42 items d d - orthotic knee size three with upper and lower bars , high grip hook and loop fastner , sach foot adapter , mechanical four bar linkage polycentric knee joint , eyelet ring , shoe track nails , adhesive pc 65 , ethaflex , jigsaw blade metal , long hammer , heavy duty high carbon steel scissor , d ring , aluminum rivet , milwaukee kit , copper rivet , round copper washer , file half round metal , file flat metal , twist drill bit , surform blade half round , deburring tool , plier , steel wire mesh net , masking tape for shoe patterns making , pu adhesive , sach foot with toes , polyfab sheet nonwoven chemical sheet , pu adhesive hardener , talcum powderfor easy last removal , one furth inches bifurcated rivets , half inches bifurcated rivets , bonded tube clamp adaptor with pylon , calf leather , pvc grains ldpe 040 , body powered be kit , body powered ae kit orthotic knee size-iii with upper & lower bars material of primary product-joint stainless steel joint thickness 8 10 mm weight limit: 100 kg: part weight 255 to 270 gm. +/- 5%. includes: (1) ms nut bolt length of joint 9 --9.4 cm width of joint 25mm length of upper bar from joint centre 14 inch plus minus 2 inches length of lower bar from joint centre 16 inch plus minus 2 inches width of bar 2 cm bar thickness 5 mm material of bar the material used for the manufacture of orthotic joint bars shall be aluminum alloy of designation 64423 wit4 of is 733 or any other equivalent material., high grip hook & loop fastner roll length of hook 25 meter (40 roll of 25 meter) length of loop---- 25 meter (40 roll of 25 meter) width of hook & loop 1and inches material--- nylon/ polyester colour------ ) /bid number : gem/2025/b/6482561 * /dated: 24-07-2025 & & / bid document 1 / 37
Tender For supply of aluminum alloy receptacle straight plug olive drab chromate over cadmium plate with protective cap cwpr0032r_10 p by 4 plus tc , aluminum alloy connector straight plug olive drab chromate over cadmium plate with protective cap sshr32p10eash4 , band clamp _band_it_ id 1 point 80 inches width 0 point 240 inches for black shell 600_052 , boot heat shrinkable strain relief with meltable inner wall for adhesive 202k163_25_2 , hs sleeve black 0 point 500 by 0 point 250 inches _12 point 7 by 6 point 4 mm_ m23053 by 16_003_0 , marking sleeve white _printable tubing_ 3 by 4 dia x 2 inches long tms_sce_3 by 4_2 point 0_9 , hs sleeve clear 0 point 75 by 0 point 375 inches _19 by 9 point 5 mm_ rt_375_3 by 4 , copper tin coated sheilded round braid 0 point 375 inches id a_a_59569r36t0375 , copper tin coated sheilded flat braid 0 point 781 inches id a_a_59569f36t0781 , hs sleeve clear 0 point 125 by 0 point 062 inches _3 point 2 by 1 point 6 mm_ m23053 by 18_204_c , electrical cable copper multi condictor tin coated 14 awg irradiation _cross linked extruded polyalkene and polyvinylidene flouride insulated 600v light weight white , adhesive epoxy ployamid kit s1125 kit_8 , atc binding wire 0 point 3mm dia , insulation tape pvc black 18 mm width , kapton tape , masking tape , solder soft 16 swg , solder flux , iso prophyl alcohal ipa , plastic cover 80 microns 12 x 18 ) /bid number : gem/2025/b/6450482 * /dated: 14-07-2025 & & / bid document 1 / 20
Tender For supply of moulded flat show aluminum beading - item, purchase of moulded flat show aluminum beading, freight, insurance, uploading charges etc., camera bracket , 8tb hdd (surveillance hard disk drive) 30 days backup , rg 45 connetor & dc pin , switch 16-port 1ghz mbps, i/o box , cat 6 cable conduit pipe with labour charges and electric work , hdmi cable 10 meter. , 6u wall mount rack enclosure , cabinet, camera power supply 10 amp , 12 volt 32 display monitor (full hdmi, 3 years extended comprehensive warranty ( to quote basic rate for per year), rate for amc as per per year (3 years on-site comprehensive warranty ) , rate for amc as per per year (3 years on-site comprehensive warranty ) , rate for amc as per per year (3 years on-site comprehensive warranty ) , rate for amc as per per year (3 years on-site comprehensive warranty ) , rate for amc as per per year (3 years on-site comprehensive warranty )