Latest aluminum film Tenders | Government aluminum film Tenders

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

CTN :39093753

22 Feb, 2025 NA

Sonitpur - Assam

Tender For bid to ras supply of hand shower make ess ess or prayag or johnson suisse , bow handle , casing caping 25mm x 12mm confirming to is 3419 part3 1988 make plaza or polycab or finolex , plug 5 amp 230 volt snow white make anchor or ssr or cona , change over switch 32 amps 4 pole tpn confirming to is 13947 part 3 2607 make havells or standard or l and t , change over switch 63 amps 4 pole tpn confirming to is 13947 part 3 2607 make havells or standard or l nadt , window glass 12inch x 11inch x 3mm thick make saint gobain or modi guard or prayag , glazing glass make saint gobain or modi guard or prayag , tower bolt , door fiber glass water resistant white cement make nerolac or berger or asian , pvc flushing cistern valve less symphonic action type low level white with in let ball valve float with handle of capacity 10 ltr as per ts , synthetic paint enamelled og confirming to is 5 2004 make berger or asian or nerolac , brass chromium plated shower rose 100 mm dia with bend make ess ess or prayag or johnson suisse , crypton new series for t5 elegant and sleek compact street light luminarie with deep drawn aluminium nousing for t5 lamp type crypton dd4 x 14w as per ts , cable pvc insulated elecric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2 point 5 sqmm single core frls as per ts , pvc tape insulation make steelgrip or cello or equivalent

Central Government/Public Sector

CTN :39368204

21 Feb, 2025 NA

Nagpur - Maharashtra

Tender For providing and fixing aluminium sliding window with glazing on ground and first floor at akashvani, civil lines, nagpur.

Central Government/Public Sector

CTN :39341620

05 Mar, 2025 90.00 Lacs

Bangalore - Karnataka

Tender For cleaning of sewage lines manholes septic tanks and repairs replacement of sewer lines manholes and soakage wells repairs to rolling shutters hangar doors collapsible gates steel aluminium windows roof north light glazing and connected miscellaneous works at a

CTN :39236778

27 Feb, 2025 NA

East Khasi Hills - Meghalaya

Tender For tender for supply of taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete , material and labour powder coated anodised aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified , material and labour powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors , windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is 733 and is 1285 , fixing with dash fasteners of required dia and size , including necessary filling up the gaps at junctions , i.e at top , bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth , rust free , straight , mitred and jointed mechanically wherever required including cleat angle , aluminium snap beading for glazing/ paneling , c.p. brass/ stainless steel screws all complete as per architectural drawings and the directions of engineer in charge. , supply and fix 4.8mm thick sheet glass , ordinary quality and glazing with oil putty in square but n. exc 0.5 sq. m in each pane , supply and fix for metallic aluminium sliding window shutter lock of size 100mm , push to unlock type , concealed handel-cum-latch lock type , completed all as specified and directed , supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to is 1868 with minimum anodic coating of grade ac 15) of approved design/pattern , with approved standard section and fixed to the existing window frame with c.p. brass/ stainless steel screws at the rate of 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening , all complete as per requirement and direction of engineer in charge. , dismantling fillets , rails , posts , rafters , purlins , etc. under 40 sq. cm in section unframed work , dismantling boarding , any description , fixed in any position with nails , material and labour for clean sawn second class hard-wood in scantlings timber fixed , supply and fix 12mm thick block boards , grade 2 quality , interior grade , decorative type with decorative face veneer on both face , fixed with screws to timber frame-work. , supply and fix 30mm width of flaps of continuous (piano) hinges , mild steel , bright finish or electrogalvanised , supply and fix 75mm size brass handles , cast type , polished bright , supply and fix 100mm hasp and staple , safety type , aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws , taking down chowkhats or frames (without taking off shutters from the frames) 1.5 sqm and n exc 4 sqm , supply and fix 2nd class hardwood plain , solid , straight chowkats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue pinned at joints , supplied and fixed size 100x60mm , supply and fix 30mm thick flush shutters , solid core construction , with block board core and plywood face panels , commercial type on both sides both face is covered with deco rative face veneer with lipping/frame to match , supply and fix of 125 mm long mild steel butt hinges , medium weight cold rolled complete all as specified and directed. , supply and fix 150mm aluminium handles , cast type , anodised , supply and fix of 200mm long aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , supply and fix of 200 mm long

CTN :39194661

24 Feb, 2025 NA

Gwalior - Madhya Pradesh

Tender For tender for supply of refrigerant gas , refrigerant gas , refrigerant gas , refrigerant gas , mccb , led bulb , rubber matting , cp brass valve , rubber sheet , hydraulic door closer , floor spring , tower bolt , tower bolt , sliding door bolt , sliding door bolt , door handle , door handle , butt hinges , butt hinges , lock , lock , steel screw , steel screw , steel screw , door stopper , rubber plug , rubber plug , bracket , drapery rod , hasp and staple , aluminium glazing beading , epdm rubber beading , pvc float valve , door stopper , gi nipple , tiles piece , cistern washer , glass pane , slef screw , cable , cable , cable , gate valve , gate valve , aluminium lugs , call bell , switch socket combination , gate valve , cp brass valve , lamp holder , gi t reducer , led mirror light , plug top , hacksaw blade , lamp holder , switch socket combination , gi t reducer , tyton joints , gi t reducer , ph reducer

Aluminum Film Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector