Latest aluminum joinery Tenders | Government aluminum joinery Tenders

CTN :38561927

19 Dec, 2024 28.04 Lacs

Multi City - Multi State

Tender For annual repair and maintenance of honorable ministers and mos bungalows under 3/b sub-division of b-division dg. 2024-25. (sh: prevention of wood work in various bungalows)

CTN :38531771

19 Dec, 2024 24.65 Lacs

Delhi - Delhi

Tender For special repair to gpra at pandara road, pandara park, cornwalis road & bharti nagar and other location under n-division, cpwd, new delhi dg. 2024-25 sh- essential utility services for protection of wood work in d-i, dii & c-i flats.subwork/packages:civil work

State Government

CTN :38543736

20 Dec, 2024 67.77 Lacs

Kullu - Himachal Pradesh

Tender For lis to bami nallah in gp hurla, naresh and diyar tehsil bhunter.h.p( sh- civil work, wood work , foundation bed for installation of pumps and motor ,electrical fitting for pump house and erection commissioning and testing of pumping machinery at stage-1,2and 3) (balance work )

CTN :38526256

19 Dec, 2024 1.00 Crore

Chohtan - Rajasthan

Tender For procurement of services and material in gram panchayat mate ka tala panchayat samiti chohtan - padla/kankar/jhajhra , mortar-soil/mud masala , lime from kali kiln for masonry work , cement , p.p.c. , white cement , fine aggregate , sand/gravel , gravel local , fly ash , surkhi." , stone dust (stone dust, in masonry work) , gitti of stone/brick (for other than road work) , 40mm measured stone (grit broken by hand) (voids cut 1/11) , 40mm stone (broken by crusher) (voids cut 1/11) , 20mm stone (broken by crusher) , 12/10/6mm stone (brick broken by crusher) , material for road work (5 km. including lead) , 63-40mm stone broken by crusher (voids cut 1/11) , 63-40mm stone broken by hand (voids cut 1/11) , 90-45mm. hand broken stone rod (voids cart 1/11) , quarry ravish voids cut 1/6) , yewal (voids cut 1/6) , concrete voids cart 1/6) , binding material (pi 4-6) (voids cart 1/6) , brick (22.5 x 11 x 7.50 cm) , 1 st class , 2nd class , soling / kharanja / masonry stone , masonry veradda (rr) , masonry radda (cr) , kharanja soling (for flooring work upto 15cm height) , kharanja soling (for road / kharanja work upto 23cm height) , jodhpuri type stone strip / arch / splint pieces (length 2-3', width 10-12", thickness 2.5-3.5%):: , flaky material(3-4" thick & length and width 1- 2") , sandstone (dpc, siii, coping, intel, tand, almirha etc) , upto 25mm thickness , upto 25-40mm thickness , upto 40-50mm thickness , upto 50-75mm thickness , upto 75-100mm thickness , upto 100-150mm thickness , firth / patti pattan katla stone , firm wa mavatse upto 35mm thick, min, 3 sqft of more res paha patan maliyala 80-76mm gattad, min. 1 sqli or mom , dimension polish , 000 sq.m. raja , 001 to 2300 marma patient sa , more than 2300 sarg patient , polish photo stroma site polish) , 900 sq.m. or , 901 to 2300 sq.m. tama , more than 2300 sq.m. , bharathan stone (gakrana adga 20mm gota) rama from 901 to 2300 class , ddo class segee lac , more than 2300 class segee , marble pippa , marble powder , marble stone (rajnagar ii quality/ local 20mm thick) , segee from 901 to 2300 class segee , more than 900 class segee , stone ghokhat , single paitham size 100 x 75 mm. , dowel paitham size 125 x 75 mm. , stone slab , up to 1.5 m length, minimum 40mm thick , 1.5 m to 2.40 m length, minimum 50mm thick , 2.4 m to 3.0 m length, minimum 65mm thick , above 3.0 m length, minimum 75mm thick , precast tiles/blocks , glazed size-30x45 cm , mosaic size-40mm thick , vitrified size-60x60 cm , interlock tiles/brick/block for road work , cement interlocking block m-30grade, 60mm thick , cement interlocking block m-30grade, bomm thick , cement interlocking block m-30grade, 100mm thick , karavasite vapor ducter single core cable 151 , marked , 1.50 sq mm. , 2.50 sq mm , 0.50 sq.mm. , , 1.00 sq.mm. , , 4.00 sq.mm. , , 8.00 sq.mm. , , local sakdi with fittings (for doors, windows and furniture) , , mango , , doors made in patwadi (30 mm groves) , thora four prayas, palle) , iron (tor star 415/500 for niparsgate , winding wire 18 gauge , iron girders , conia iron/chokor sariya/patti/pangal iron , cartted iron wire (size 12 gauge wire and 12 gauge strad/ gauge wire and 14 gauge strad/14 gauge , jaati , iron mesh (24 gauge, 14 mesh) , cement concrete mesh akash patal 40 mm thick , glass , 3 mm thick glass , paint , enamel paint , distemper (water bound) , for painting (aras/kaati) , primer (for iron/wood) , petroleum products , diesel hsd , movil oil , bitman shalitax board (25 mm thick) , plain sheet (plain sheet) , gi sheet 22 gauge (0.80 mm). , gi sheet 24 gauge (0.63 mm) , m.s. sheet 22 gauge (0.80 mm) , s.s. sheet 24 gauge (0.63 mm) , gardener , g.i. sheet 1 mm thick , g.i. sheet 22 gauge (0.80 m.m.). , asbestos cement sheet 6mm [2.5/2.75x1m) , other , pvc sheet 1'mm thick (coloured/plain) , 2. literof expo sheet green yellow colour (183x90) , 1 , pipe , gi 15 mm dia (class) , 2. gi 20 mm dia (b class) , 3 , 4 , 6 , 7 , gi 25 mm dia (b class) , ac 75 mm dia , ac 100 mm dia , pv

CTN :38345635

18 Dec, 2024 17.50 Lacs

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - office renovation - invitation of bids for conversion of offices outside engineering barrier gate to storage compartments of oil & dope store at oap, mumbai-29 , "dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area 3 sq. metres and below " , "dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. " , "demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. " , "providing and constructing brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to is: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):with modular bricks " , providing and laying internal plaster in c.m.(1:4) 12 to 18 mm thick minimum, to brick masonry and/ or concrete surfaces in any location and at all levels including cleaning and watering the surfaces, filling out hollows or out of plumb surfaces with mortar and finishing to correct line and plumb etc. complete. , providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of "'basf" (master emaco 348 s) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of aiesl/airport premises. , "steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.thermo-mechanically treated bars of grade more. fe-500d. " , removing and dismantling existing rolling shutter with ms work in single section or built-up section including rsj, angles, tees, flats, plates, gusset plates, channels etc., including dismembering using gas cutting, cutting machine lowering the same from any level and stacking up to the lead of 50 m. all as directed by eic, etc., complete., including labour, tools , plants etc., complete. , "providing and fixing isi marked flush door shutters conforming to is :2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. "

CTN :38541731

27 Dec, 2024 3.61 Lacs

Kolkata - West Bengal

Tender For renovation and repairing work of flat no f5 at rhe 32 ballygunge circular road kolkata by renewing plaster structural repair wood work for doors and windows repair including priming and painting and other necessary allied works

State Government

CTN :38526161

26 Dec, 2024 81.62 Lacs

Ajmer - Rajasthan

Tender For supply and fixing of furniture at new office building - officer working table. providing & placing executive officer working table made out of 18mm thick isi marked water proof, termite proof, borer free plywood with 1.00mm thick decorative laminate of approved shade on external, internal and under surfaces all around of table duly pasted with isi marked adhesive of approved make all work as per directions and satisfaction of engineer incharge. brief specifications of table are as under: a) table size 1800(w) x 1200 (d) x 750 (h) all dimensions in mm. b) all framework and supporting arrangements for table and top shall be made of seasoned 2nd class teak wood duly primed with approved primer and finished with melamine polish in matt / gloss finish.c) the table top, side panels & front modesty shall be made up of 18mm thick isi marked plywood with 1.00mm thick decorative laminate on external,internal and under surfaces of table duly pasted. d) cpu & keyboard arrangements. integrated wooden shelf for cpu & foldable arrangements for placing keyboard separately made out of 18mm thick isi marked plywood & 1.00 mm thick decorative laminate all around shall be provided. e) under table storage : one under table drawer type storage cabinet having 03 nos. drawers. the internal dimenisions of top two & last drawers shall be 350(w) x 480(d) x 150(h) & 350(w) x 480(d) x 350(h)in mm respectively. the storage cabinet shall be made of 18mm thick plywood with 1.00mm decorative laminate on outer, inner and all surfaces. all drawers, shelves, doors etc shall be made with 18mm thick plywood with 1.00mm thick laminate on inner surfaces. all drawers shall run on telescopic channel set. the telescopic channels shall be of make hettich/ godrej/ hafele/dorset/ ozone . the drawers and shutters shall have proper metallic brass/ copper/ stainless steel/ brushed finish handles of adequate size and proper seperate locking arrangements.f) electrical & other accessories arrangements. the table shall have proper concealled provisions for accommodating power, telephone, lan, audio & video cables, electrical points with switches, sockets, ports for electric, telephone, intercoms, lan, computer systems, monitors, pbax, printers etc. of approved make and requirements.suitable space shall be provided for visitor chairs. all edges shall be sealed with 2nd class teak wood rounded moulding. the edge moulding shall be treated and finished with melamine polish.all work complete including fabrication, nailing, screwing, pasting, transporting, loading, unloading, placing, finishing, setting, etc complete in all due respect as per technical specifications, directions and satisfaction of engineer incharge., officer working table. providing & placing executive officer working table made out of 18mm thick isi marked water proof, termite proof, borer free plywood with 1.00mm thick decorative laminate of approved shade on external, internal and under surfaces all around of table duly pasted with isi marked adhesive of approved make all work as per directions and satisfaction of engineer incharge. brief specifications of table are as under: a) table size 1500(w) x 900 (d) x 750 (h) all dimensions in mm. b) all framework and supporting arrangements for table and top shall be made of seasoned 2nd class teak wood duly primed with approved primer and finished with melamine polish in matt / gloss finish.c) the table top, side panels & front modesty shall be made up of 18mm thick isi marked plywood with 1.00mm thick decorative laminate on external,internal and under surfaces of table duly pasted. d) cpu & keyboard arrangements. integrated wooden shelf for cpu & foldable arrangements for placing keyboard separately made out of 18mm thick isi marked plywood & 1.00 mm thick decorative laminate all around shall be provided. e) under table storage : one under table drawer type storage cabinet having 03 nos. drawers. the internal dimen

Central Government/Public Sector

CTN :38516121

20 Dec, 2024 NA

Madhubani - Bihar

Tender For tenders for work category (viz. wood furnishing work and electrical work) for branch office: khojpur (304700), district: madhubani

State Government

CTN :38503344

27 Dec, 2024 19.91 Lacs

Shipaijala - Tripura

Tender For maintenance of pwd internal electrification sub-division office, udaipur during the year 2024-25./ sh- repair to plasters, wood works, false ceiling, gci sheet roofing, tiles work, painting etc