Aluminum Packing Set Tenders

Get complete information related to latest Aluminum Packing Set Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminum Packing Set Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminum Packing Set Tenders .

Filter

Loading....

Get Tender in Email

CTN :39907875

22 Apr, 2025 NA

Jammu - Jammu And Kashmir

Tender For rate contract for supply of allied material for reclamationrepairre-build of damaged distribution xmers of various capacities ranging from 25kva to 630 kva in ediii jpdcl for the fy 2025-26 or till next tender is finalized - lt bush rods of brass (m-12), lt bush rods of brass (m-20), lt bush rods of brass (m-30) l.v. bush rods of brass m-30/m-40, ht bush rods of brass (11 kv), lv brass bush rods 12mm ( in exchange of burnt/ damaged one), lv brass bush rods 20mm ( in exchange of burnt/ damaged one), lv brass bush rods 30/40mm ( in exchange of burnt/ damaged one), hv brass bush rods (11kv) ( in exchange of burnt/ damaged one), lv bushings (12mm), lv bushings (20mm), lv bushings (32/30 mm) , ht bushing (11 kv), film paper, lethoride paper/khakhi paper, press boards, gutties, rubber washer of different sizes, ht washers, lt washers m-12, lt washers m-20, lt washers m-30/m-40, cork sheets (1000mmx500mmx5mm), rubberized cork strip(40mmx5mm), bakelite tubes, cotton tape, nawar tape, m.seal, glass sleeves, insulation gum, wooden wedges, craft paper, packing sheets, aluminum gutka, nuts & bolts, h.t. bush clamps, copper brazing rod, aluminum brazing rod, h.t / l.t oil seals-12, h.t / l.t oil seals-20, h.t / l.t oil seals-30/40, cotton waste (old cotton sarres/cloth), m.s washers for l.t connections, plugs of different sizes 1 1 , flux, grey paint, turpentine oil, varnish, welding rods (8mm & 10mm), oven heating/elements coils, 3 multi stands cu cable (10 mm ), thinner, crepe tape, oxygen cylinder (refill), megger (500volt, 5000 mw), oxygen regulator, oxygen cylinder nozzle, oxygen pipe for gas cutter, clamp for oxygen pipe, c clamp 18 , hydraulic transformer lifting trolley, trolley for scrap loading/unloading, clamp meter, welding helmet, welding cable with holder, cutter pliers, screw driver (all sorts), ratchet wrench with socket set compete, pipe wrench 12 , pipe wrench 18 , bolt cutter 12 , bolt cutter 18 , spanner 15/21 mm, spanner 38/48 mm, oven thermostat (0-300 amp), contractor 63 amp isi ,10ka of reputed make, cable wire 16 mm., filter plant high pressure supply hose 25 mm (1 ), 35 bar/500 psi, filter tank pipe rubber, wooden frames for winding of ht /lt, exhaust fans for workshop 24 heavy duties, pedestal fans for workshop (heavy duty), out side clipper for winding machines, inside clipper for winding machines, heavy duty drill machine (1050 watt), scissors (large size for cutting papers), test cell of oil testing machine (60kv) (500 ml/ acrylic test cell) with removable & adjustable electrodes, ht/lt winding machines bearing, ht/lt winding machines bearing vee-belts, ht/lt winding machines bearing gear-box, ht/lt winding machines bearing foot-switch, ht/lt winding machines bearing counters, 1 hp pump motor centrifugal, change over switch 400 amp, mccb 4 pole 100 amp(25ka), scale steel 1 meter, scale steel 12 inch, eot crane switch, angle grinder (850 watts), air blower macine (900 watts), digital micrometer 0 to 25 mm, lpg 19 kg (refill), laminated core of all sorts, multi stand 3 core copper cable 10 sqmm, testing clips, saw dust, dust sand, led light street light150 watt(ip67), led light flood light200 watt(ip67), steel sand buckets, fire extinguisher mechanical foam 50 ltr, fire extinguisher (refill) 50 ltr, oven blower 1450 rpm, twin core 16 sqmm cable (copper), twin core 16 sqmm cable (aluminium)

CTN :39899301

18 Apr, 2025 2.00 Lacs

Kulgam - Jammu And Kashmir

Tender For supply of line workshop material item wise as and when required during the financial year 2025-26. - electrical store/workshop items/: as per is standards, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make, lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, pp rope of sizes, aluminum thimbles 95/120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, plastic meter seals, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat of sizes including clamps, gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, rechargeable 5w emergency search light, high power with 3000mah lithium battery, and an ergonomic design, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8swg, suspension/tension clamp with eye hook, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 50sqmm ltab, straight through cable jointing kit for 120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm ltab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, led fancy decoration mala light (12m long) (orange+white+green), dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchane of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tap roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water capacity of 47 ltrs and gas capacity of 7 c

Central Government/Public Sector

CTN :39851518

15 Apr, 2025 NA

Mandal - Gujarat

Tender For supply of ammonia compressor spares> - crank shaft assembly complete (part no.340.03.001.50 ), bearing bush (std) pump end (part no.082.28.050.50 ), thrust ring bronze (part no. 336.02.004.50 ), thrust ring steel (part no.336.03.005.50 ), driving plate (part no. 082.28.060.50), retaining plate assembly (part no. 336.14.114.50), bearing bush (std) drive end (part no.336.02.003.50 ), connecting rod bolt (part no. 082.04.040.51), bearing intermediate half (std) (part no.086.15.030.50 ), shaft seal (part no.082.08.000.50 ), piston assembly (part no.082.03.000.50 ), plate safety (piston) (part no.082.03.040.50 ), set of piston rings (part no.082.03.150.50 ), big end bearing half std (part no.082.04.030.50 ), gudgeon pin (part no.082.03.020.50 ), connecting rod with bolt (part no.082.04.070.50 ), delivery valve assembly (part no. 336.12.003.50), suction valve spring (part no.336.12.001.50 ), suction valve ring (part no.082.28.130.50 ), suction stroke limiter (part no. 336.12.002.51), cup spring (part no. 336.12.011.50), cylinder liner assembly (part no.336.04.000.50 ), cylinder liner(part no. 336.04.001.51), safety plate (connecting rod) (part no. 082.04.050.50), unloader piston assembly (part no. 336.05.007.50), oil pump assembly (part no. 082.07.000.50), filter wire gauge (part no. 336.10.009.50), paper filter (part no.351.09.014.50 ), suction filter assembly (part no. 336.10.023.50), discharge filter assembly (part no.336.10.031.50 ), tah-8 valve assembly (part no. 351.09.003.50), hex nut (connecting rod nut) (part no. 082. 04. 100 .51), spring (vld piston) (part no.336. 05 .002 .50 ), kit delivery valve ring and springs (part no.085.28.08 ), teflon ring (vld piston) (part no. 336.05.006.50), spring (oil regulator) (part no.082.09.020.50 ), oil level glass (part no.082. 28. 170. 50 ), ball dia 16 (part no. 999. 30 .785. 50), k5 valves (part no. 082. 16.001. 50), stud (short) m16 x35 (part no. 999.03.700.50), stud (long) m16 x65 (part no.999.03.710.50 ), hexagonal hd screw m16x35 (part no. 999.01.690.50), set of safety valve parts (part no.336.13.00 ), kit gasket/ o rings/ all packing for kc-9 compressor (part no. 852801), kit oil pump gear (part no. 0852805), kit liner parts(part no.0852810 ), kit-shaft seal o ring (part no.0852804 ), intermediate bearing assembly (part no.086.15.040.50 ), hex nut m16 (head cover) (part no. 999.06.687.50), bearing cover assembly drive end (part no.336.02.001.50 ), bearing cover assembly pump end (part no.082.02.001.50 ), stud for bearing cover m12 x 125l (part no. 999.03.688.50), stud for bearing cover m12 x 100l (part no. 999.03.683.50), hex nut m12 (part no.999.06.650.50), solenoid valves for kc-9 compressor (part no. 082.25.030.50), key for flywheel / shaft key (part no.082.28.191.50 ), fly wheel / compressor pulley - kc 9 (part no.350.01.033.50), oil return valve (part no. 082.06.000.50), kc buffer springs (part no.080.04.020.50 ), gudgeon pin bush (part no.082.04.020.50 ), piston (part no.080.03.110.50 ), gasket kpgm 3/b (head gasket) (part no.082.28.670.50 ), ring teflon (safety valve) (part no.336.13.002.50 ), aluminum packing set (part no. 082.19.003.50), o-ring set for kc-09 (part no.080.19.005.50 ), gasket set (part no.080.19.001.50 ), gasket round flange 150 nb (part no. 993.00.311.00), hex. head bolt m 10 x 70 (part no. 999.01.655.50 ), housing for piston (part no. 082.10.090.51), shaft seal cover (part no.082.28.160.50 ), spring (leaver) (part no.082.10.050.50 ), springs (oil filter) (part no.336.10.006.50 ), springs (suction filter) (part no.082.12.040.50 ), spring (vld) (part no. 336.05.002.50), curtation spring (part no.082.100.080.50 ), set of pistons & springs (oil pump) (part no. 820706 to 820715), cranck case heater (part no.082.26.173.50 ), ferrule (part no.999.16.001.50 ), union nut (part no. 999.16.063.50), top housing assembly suction (part no.336.10.035.50 ), top housing assembly discharge (part no.336.10.036.50 ), reducing nipple (part no.336.14.111.50 ), ferrule (pa

Loading, Please wait...

Aluminum Packing Set Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector