Get complete information related to latest Aluminum Pipe Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminum Pipe Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminum Pipe Tenders.
Tender For corrigendum : tn-11174 supply of spares for esp of unit 1 to 7 at kstps, kota. - outer arm for emitting rapping sys., outer arm for collecting rapping, inner arm of esp for collecting, u" guide for collecting electrodes with inner distance 44.5 mm for stage- 1 to 2, u" guide for collecting electrodes with inner distance 54.0 mm for stage- 3 to 5, spiral emitting electrode 47 turns, wire, 2.7mm (mat for wire uhb-904 l, mat for hook- tube carbon steel), emitting electrode 2.7 mm wire dia, 52 turns spiral type with hook (material for wire uhb-904 l, material for hook tube carbon steel), sleeve for shock bar of esp with ht bolt & nut (m 20x75), sleeve bearing for emitting drive, set ring for cerm, plain bearing, shaft insulator, g d screen sheet, pin for pin wheel i/ii, shaft-i for cerm d50, l-4790mm, shaft-ii for cerm d50, l-4985mm, emitting rapping shaft 40mm dia, 2500mm length, shaft-iii for eerm d50 l-3350mm, emitting drive shaft for stage 3, dia-40mm, l-3306mm, key size 12x8x70, emitting drive shaft iii, dia-40mm, l-2995mm, ms packing shim, 100 mm x 70 mm, thickness 6mm, pin wheel-i (big), pin wheel-ii (small), shock pad for shock bar for esp, shaft sleeve, od 50mm,id 40.5 mm,length 120mm, shaft-i for eerm, d-50 mm, l-4320 mm stage-ii, shaft-ii for eerm, d-50 mm, l-4250 mm stage-ii, emitting drive shaft -ii, d-40 mm, l-3020 mm stage- ii, end shaft for cerm with key slots, d-50 mm, l-790 mm stage-iii to v, shaft-i for eerm, d-50 mm, l- 3120 mm stage iii to v, shaft-ii for eerm, d-50 mm, l- 3290 mm stage iii to v, top coupling for emitting drive shaft-i , d- 40 mm, shock bar guide (f) for stg.-i , 6 slot, shock bar guide (r) for stg.-i , 4 slot, shock bar guide (r) for stg.-ii , 4 slot, deflection plate ms having size 495x230x2.5mm as per drwing enclosed
Tender For supply of cdu extra cable qty 30 nos - aluminium alloy connector plug with olive drab chromate over cadmium plated with protective cap_pin type d38999 by 24_ , aluminium alloy connector plug with olive drab chromate over cadmium plated with protective cap_socket type d38999 by , receptacle cover with ring attachment_re d38999 by 33w15n 1411e23 as per sample and drg , plug cover with ring attachment_re d38999 by 32w15n 1411g , ring steel _as per drg no a4_515_smp_57023 , boot heat shrinkable strain relief with meltable inner wall for adhesive_202k132_25_0 _ raychem_ , copper braid silver coated_12 x 21 mm , electrical cable copper multi strands tin coated cat no 6 2 core xletfe insulated _ white and white with blue spiral strip_ , electrical cable copper multi strands tin coated cat no 6 2 core xletfe insulated _ white and white with blue spiral strip , electrical cable copper multi strands tin coated cat no 6 single core xletfe insulated white modified extruded shield , electrical cable copper multi strands tin coated cat no 5 single core xletfe insulated modified extruded black_22 by 19 , electrical cable copper multi strands tin coated cat no 6 single core xletfe insulated modified extruded white_22 by 19 , electrical cable copper multi strands tin coated single core xletfe insulated modified extruded white with black spirla strip , co_axial rf shield cable cat no 7 black xletfe single jacket modified extruded_28 by 7 by 36 awg _ spec is to 07 , electrical cable copper multi strands tin coated cat no 7 2 core fep insulated _ white and pink_ modified extruded , hs sleeve black 1 by 2 inches _raychem dr_25 , splice asper pt no point x11_209_509__20_18_16 awg_ l 30 mm , splice asper pt no point x11_209_508__26_24_22_20awg_ l 20 mm , heat shrinkable splice asper pt no point xk11_203_767_l 22 mm , hs sleeve white_20 by 10 mm , hs sleeve clear _20 by 10 mm , hs sleeve clear_2 point 5 by 1 point 3 mm , hs sleeve clear_4 by 2 mm , atc binding wire_0 point 3 mm dia , kapton tape_24 mm width , luminescent white paint_acrylic marker , nylon thread white _0 point 3 mm dia , glue tape 26 mm width x 0 point 30 mm thk_epoxy tape s1255_4 , adhesive black _ heat treatment silicon adhesive__s1125 is to rechem _30gms_ , iso prophyl alcohol _ipa , acrylic conformal coatns_ , solder soft 16 swg_sn_63 percent comma pb_37 percent , solder flux_ , tissue paper 25 x 30 cm_ , plastic cover 80 microns_24 inches x 24 inches , permanent marker pen black_
Tender For centralized rate contract for two (02) years of spares of sam turbo make pumps installed in ash handling plant of dvc - impeller with screw & hub cap : part no : -18 & 38, 58 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), fasteners set (total quantity of fasteners applicable for one bare ba overflow transfer pump, model : arl 200/410 ) : part no : -na : material: - ms / hts, lock washer (p.end) : part no : -63 : material: - is 1363 ms, piston ring : part no : -51 : material: - is 210 fg 200, key (coupling) : part no : -32 : material: - bs 970 en 8, laybrinth (drive end) : part no : -24 c : material: - astm a 216 gr wcb, coupling set [od 280 mm] : part no : -na : material: - is 210 fg 200, base with top cover : part no : -1 & 2 : material: - is 210 fg 200, volute casing : part no : -17 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), lock nut (p.end) : part no : -60 : material: - is 2062 c 15, grease nipple : part no : -48 : material: - steel, lock washer : part no : -47 a : material: - is 1363 ms, check nut : part no : -47 : material: - astm a 216 gr.wcb, key (shaft sleeve / impeller) : part no : -31 : material: - aisi 304, bracket side cover : part no : -25 : material: - astm a 216 gr wcb, laybrinth (pump end) : part no : -24 : material: - astm a 743 cf8, shaft sleeve : part no : -12 : material: - aisi 410 (h), gland : part no : -10 : material: - astm a 216 gr.wcb, grease retainer : part no : -7 : material: - is 210 fg 200, wear plate (b.side) : part no : -16 : material: - nihard type iv (550 bhn) / 24% chromium ci (550 bhn), pump shaft with keys : part no : -4 : material: - bs 970 en 8, lantern ring : part no : -13 : material: - aisi 410, gland housing : part no : -9 : material: - alloy ci (290 - 320 bhn), end cover : part no : -5 : material: - is 210 fg 200, ba overflow transfer pump complete without motor, model-arl 200/410, earlier pump sl.no.-16804-16805, head:20mwc, capacity: 320 cubic meter/hr., size:200x200., o ring set (1 set=8nos.), for ba overflow transfer pp, model of pump-arl 200/410, shaft sleeve : part no : 53.6 : material : aisi 410, impeller with nut & helicoil insert : part no : 24.2 : material : is 318 gr.i, bearing housing lantern : part no : 35.6 : material : is 210 fg 200, bearing bed : part no : 36.7 : material : is 210 fg 200, bearing cap(outer) : part no : 37.2 : material : is 210 fg 200, bearing cap(inner) : part no : 37.3 : material : is 210 fg 200, oil seal set (1set = 2 nos) : part no : 43.13 & 43.3 : material : syn. rubber, impeller nut with helicoil insert : part no : 93.4 & 94.21 : material : aisi-316, wear ring (casing) : part no : 51.4 : material : is 318 gr.ii, wear ring (casing cover) : part no : 51.23 : material : is 318 gr.ii, key(coupling) : part no : 95.2 : material : bs 970 en8, circlip : part no : 94.23 : material : spring steel, grooved nut & lock washer : part no : 93.3 & 94.03 : material : sae 1018/1020 is 513 crca sheet, gland : part no : 46.4 : material : is 210 fg 260, pressure ring : part no : 46.9 : material : aisi 410, lantern ring : part no : 46.10 : material : aisi 410, gland packing set (1set = 4 nos) : part no : 47.3 : material : tiga, fastners set [total quantity of fastners applicable for one bare ash conditioner water pump, model : cpc 80/400 ] : part no : na : material : ss, key(impeller) : part no : 95.03 : material : aisi-316, key (sleeve) : part no : na : material : aisi-316, gasket set (1set = 4 nos) : part no : na : material : caf-9/ paper oil resist, volute casing : part no : 11.4 : material : is 210 fg 260, pump shaft with keys : part no : 22.3 : material : bs 970 en8, disc (impeller) : part no:550 : material :-ansi-316, gland : part no:452 : material :-astm a 743 gr.wcb, lantern ring : part no:458 : material :-aisi 410, key (impeller / shaft) : part no:940.01 : material :-aisi 316, lock washer : part no:931 : material :-sae 1018/1020, bearing cover (n.d.e) : part no:360.01 : material :-ast
Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi
Tender For supply of brake hanger lever assembly (in board) (rh) to clw drg.no.03.3.19.120 alt.2, with sleeve (ref.no.2) to be as per rdso drg.no.sk.el 4549 alt.2, ref.4 and bush with material manganese steel to irs. r65-78. [ warranty period: 30 months after the date of delivery ]
Tender For supply of lab coats, full sleeve, large size, white , lab shoe, mesh fabric with pvc sole, size 6 uk , lab shoe, mesh fabric with pvc sole, size 7 uk , lab shoe, mesh fabric with pvc sole, size 8 uk , lab shoe, mesh fabric with pvc sole, size 9 uk , stainless steel braided pigtail, 1mtr. length for gas cylinder
Tender For supply of interstage bush for diffuser c.i. for rkb 150 by 34k 6 stage part no. rk1503435 , bearing housing nde for rkb 150 by 34k 6 stage part no. 2401 , rotating assembly 6 stage moc std ftd for rkb 150 by 34k 6 stage part no. subrua , bearing housing ci for rkb 150 by 34k 6 stage part no. 240 , set of o rings 6 stg rubber for rkb 150 by 34k 6 stage part no. rkb15034k6rubberssor1 , diffuser with guide vanes moc ci for rkb 150 by 34k 6 stage part no. 129 , distance sleeve moc c 40 for rkb 150 by 34k 6 stage part no. 317 , enclosed impeller ci for rkb 150 by 34k 6 stage part no. 151 , thrust bearing adaptor ms for rkb 150 by 34k 6 stage part no. 272ms , lantern ring moc ci for rkb 150 34k 6 stage part no. 227 , compression spring moc steel for rkb 150 by 34k 6 stage part no. 483 , wear ring suction side moc ci for rkb 150 by 34k 6 stage part no. 190 , liquid deflector de nde for rkb 150 by 34k 6 stage part no. ldrkb150x34 , delivery casing c.i. for rkb 150 by 34k 6 stage part no. 111 , bearing cartridge nde c.i. for rkb 150 by 34k 6 stage part no. bcrkb150x34 , stage casing , ci for rkb 150 by 34k 6 stage part no. rkb15034kci124 , shaft sleeve s side for rkb 150 by 34k 6 stage part no. rkb15034k310 , shaft sleeve d side for rkb 150 by 34k 6 stage part no. rkb15034k311 , wear ring del side for rkb 150 by 34k 6 stage part no. rkb15034k191 , cooling chamber moc ms for rkb 150 by 34k 6 stage part no. 252 , suction casing moc ci for rkb 150 by 34k 6 stage part no. 113 , wear ring suc side for rkb 150 by 34k 6 stage part no. rkb15034k190 , pump shaft 6 stage moc c 40 for rkb 150 by 34k 6 stage part no. 180 , set of tie bars with nut and washer 6 sta for rkb 150 by 34k 6 stage part ) /bid number : gem/2025/b/6467492 * /dated: 24-07-2025 & & / bid document 1 / 50 no. ssot1 , set of keys 6 stage moc c40 for rkb 150 by 34k 6 stage part no. ssok1 , rotating assembly std by ftd for 6up4 part no. srua2 , impeller ist stage ci for 6up4 part no. 151 , chuck nut de bronze for 6up4 part no. 3341 , chuck nut nde bronze for 6up4 part no. 3342 , cart for bearing nde253 for 6up4 part no. nde253 , pump shaft cw moc c40 for 6up4 part no. 6up4c40180 , shaft sleeve de and nde ci for 6up4 part no. 310 , wear ring ci for 6up4 part no. 19000011 , bearing cover nde moc ci for 6up4 part no. 271 , bearing cover de moc ci for 6up4 part no. 270 , split lantern ring bronze for 6up3 part no. 6up3br227 , rotating assembly for 6up3 part no. srua201 , shaft cw ccw c40 for 6up3 part no. 6up3c40180 , shaft sleeve de nde ci for 6up3 part no. 6up3ci310 , set of keys aisi410 for 6up3 part no. 6up3aisi410ssok1 , impeller ci for 6up3 part no. 15900011 , casing wearing ring suct moc ci for 6up3 part no. 6up3ci190 , casing wearing ring del mocci for 6up3 part no. 6up3ci191 , lock nut c40 for 6up3 part no. 6up3c40336 , upper and lower half casing for 6up3 part no. 122123 , rotating element for 4up3 part no. 4up3997 , impeller for 4up3 part no. imp4up3 , shaft sleeve de nde for 4up3 part no. ssdende4up3 , split gland for 4up3 part no. 229 , impeller key for 4up3 part no. 320 , shaft sleeve nut for 4up3 part no. 334 , stuffing box bush for 4up3 part no. 350 , stud for stuffing box housing and gland for 4up3 part no. 731 , upper half casing for 4up3 part no. 122 , lower half casing for 4up3 part no. 123 , lantern ring for 4up3 part no. 227 , bearing nut for 4up3 part no. 335 , casing ring de and nde for 4up3 part no. 190191