Latest aluminum tube Tenders | Government aluminum tube Tenders

State Government

CTN :43467490

16 Jan, 2026 NA

Delhi - Delhi

Tender For corrigendum : s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

State Government

CTN :43539595

21 Jan, 2026 NA

Kannur - Kerala

Tender For disposal of old and unserviceable scrap items under various substations vacccum cleaner damaged , annunciator faulty , static relay faulty , mechanical relay faulty , 66kv 10mvar reactor faulty , rubber tyre scrap , prv damaged , tube light damaged , la counter , 11kv cable end , electrical kiosk and panel scrap 85kg , oil barrel empty damaged , fire wood , brush cutter engine (scrap) , disc insulator (unserviceable) , ups damaged , battery charger 110v,20a scrap (@ptru) , ac (asbetose)sheet (dismantled) , 11kv vcb bottle , 11 kv xlpe 3*300mm2 ug cable (3 pieces) , 11kv cable, 1 500 sq mm , 80mm buchholz relay with gasket (faulty) , rusted earth wire , mettalic 33kv cable drum (old scrap) , empty oil barrel (damaged) , battery charger, 110v, 15a , iron scrap , 11kv xlpe cable 3x300mm2 , 11kv xlpe lug cable 10x 500mm2 , 9mtr psc pole damaged , spring charge motor for alind make outdoor vcb faulty , disc insulator 90kn , acsr scrap , lt control panel , window frame (iron scrap) , 11kv insulator , 3x 300 mm2 11kv xlpe cable bits , vacuum interrupter for 11kv 630a dismantled (11kv vcb bottle) , copper scrap , aluminium scrap (acsr conductor) , control cable aluminium scrap , control cable copper scrap , 11kv 3x300 sqmm xlpe cable , space heater(13no=2.47kg) , 3ph 4 wire energy meter-/5a secure permier 300 faulty , 11kv ab switch faulty , cr panel for 33kv side of 110/33 kv transformer (iron scrap) (1no=230kg) , gi strip 50x6 mm (various small lengths) , acsr scrap , 11kv xlpe 1x500 sqmm outdoor termination kit (faulty) , iron scrap , mechanism box for isolator assembly (25kg iron scrap) , mechanism box for earth switch(35kg iron scrap) , 11kv xlpe 1x500 sqmm damaged , 11 kv vaccum bottle (scrap) , gi earth wire bits dismantled , empty oil barrel , 11kv disc insulator 45kn (old and used) , flurescent tube choke , sodiunm vapour lamp fitting (faulty) , aluminum clamp scrap , alumiunm conductor scrap , copper scrap , empty oil barrel , insulator stack for 110kv isolator(27 insulators) , copper control cable cut bits , helmet(unusable)(plastic-4.5kg) , relay (used & unserviceble) , earth discharge rod(used) , volt meter(faulty) , aluminium control cable cut bits , s/s hardware fitting for aaac(22nos/24.12 kg) , vibration damper for aaac(45 nos/103.5 kg) , s/t hardware fitting for aaac(24 nos/16.8 kg) , steel tail clamp 7/3.15mm for earth wire(16 nos/1.8 kg) , gi lug for earth wire 7/3 mm(324 nos/85.5 kg0 , 25mm ms rod scrap , gi strip 50x60mm , 3cx 300 mm2 ug cable armoured- scrap cut pieces , alluminum alloy scrap , breather faulty scrap , disc insulator 70kn , s/s hardware fitting w/o arcing hon for tiger conductor , s/t hardware fitting w/o arcing horn for tiger conductor , damaged disc insulator

Central Government/Public Sector

CTN :43532660

16 Jan, 2026 NA

Dharmapuri - Tamil Nadu

Tender For supply of bent steady arm assembly including steady arm tube(40/30) ri no. 2521, eye piece ri no. 2522, steady hook ri no. 2523 and swivel ri no. 2352 as per rdso spec: eti ohe 21, ti/spc/ohe/fittings/0130-10/13-rev-1, drw: eti ohe p 2520 rev b, str: core-str-16 rev-1 or latest. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :43297340

27 Jan, 2026 NA

Kheda - Gujarat

Tender For corrigendum : supply of various type of fittings & ferrules for imd-1,2,3 & 7 of wanakbori tps. - ss316 male connector fitting fitting size: 3/8"x1/4" npt (m), ss 316 1/4 inch npt male connector suitable for 6 mm od tube, tube end thread size: 7/16-20 with one nut and one set of ferrule & back ferrule, 1/2 inch x 1/4 inch od brass male connector, qsl-1/4-8 push in male elbow connector 1/4" x 8 mm pu tube for 4., pu-8 union fitting, ss elbow fitting : 1/4" x 1/4" (m npt), brass 1/4" o.d.of tube x 1/4" npt male connector assembly with one olive and one nut (bsp threads), male dummy plug 3/8 ss male npt fitting, male dummy plug 1/4 ss male npt, m.s. pipe socket (female), size: 1/2" bsp, qst 8 push in equal tee connector for 8 mm od pu tube for 4, qs-1/2-8 (d-3/8-1/2-a+qs-3/8-8) push in straight connector 1/2 x 8 mm od pu tube for 4., qs-1/4-8 push in straight connector 1/4 x 8 mm od pu tube for 4., qsl-3/8-8 push in male elbow connector 3/8" x 8 mm pu tube for 4., qst-1/4-8 push in tee male connector for 1/4x8mm pu tube for 4., qsl-1/2-8 push in male elbow connector for 1/2x8mm pu tube for 4., pum-8 x 1.25 bl polyurethane tubeing 8 mm od blue color., brass flare nuts suitable for 1/4" o.d.of tube, brass male connector 1/4"x1/4" bsp, brass ferrules 3/8 ", brass male connector 1/4"x3/8" bsp, ci ball valve screw ends size: 1/2", full wave brass gate valve size:1/2", compression tube brass fitting, male/female reducer with one nut & one olie for male, size 3/8" (f) x 1/2" (m) bspt., brass 3/8" o.d.of tube x 1/4" npt male connector assembly with one olive and one nut (bsp threads), 1/2 inch x 3/8 inch od brass male connector, 1/4 inch brass nut with ferrule, 3/8 inch brass nut with ferrule, brass union tee with nut and ferruls 1/4" x 1/4" x 1/4", brass fitting:m/f adopter 1/4 bsp (m) x 1/4 bsp (f), brass fitting:m/f adopter 1/2 bsp (m) x 1/2 bsp (f), 3/8" x 3/8" brass valve inside thread, 1/4" x 1/4" brass valve outside thread, ss 1/4" od (std) double ferrule compression fitting, ss 1/2" od double ferrule compression fitting, ss 3/8" od double ferrule compression fitting, 3/4 inch ss nut with front ferrule and back ferrule, ss tube fitting ss 316 1/2"npt m x to suit 1/2"od ss tube with nut and ferrule, 3 way gauge cock, matl: ss-316, process conn: 1/2 inch nptf to suit 1/2 inch od ss tube, ss 316 union tee suitable for 6 mm od tube, tube end thread size: 7/16-20 with three nuts and three sets of ferrule & back ferrule, ss nipple size: 1/2"x100 mm, s.s.316 ball valves, size: 15 nb, pressure withstand : 60 kg/cm2, both end threaded., gun metal gate valve size 20 mm (3/4"), is-778, class-i, screwed female end., ss 316 hex bolt with nut size m10x60 mm full thread with plain washer, 3/8" od 316 ss x 2 mm thick ss tube, pressure guage fittings(adapter) 1/2" bsp(m) x 3/8" bsp(f), qs-3/8-10 push in connector for 4., qs-1/4-6 push in straight connector 1/4 x 6 mm od pu tube for 4., qs-3/8-6 push in straight connector 3/8 x 6 mm od pu tube for 4., qs-1/2-6 push in straight connector 1/2 x 6 mm od pu tube for 4.

Central Government/Public Sector

CTN :43520085

30 Jan, 2026 NA

East Singhbhum - Jharkhand

Tender For supply of extension tube with keys, suitable to our drill jumbo model: 281 epiroc make , boom assembly, suitable to lhd model: st-3.5 epiroc make but one to one as oem

Central Government/Public Sector

CTN :43531766

21 Jan, 2026 NA

Coimbatore - Tamil Nadu

Tender For tamper check paste. body material: aluminum tube type of nozzle: stainless steel. permanent ink: yes.volume: 30 ml. nature of paste: highly visible, viscous and fluorescent colour: orange. tip size: 2.9mm. extra nozzle of 1 mm and 2 mm should be provided. make: century/surya/laco//markal/luxor/eatech/posterman/sakuraor/dykem/torque seal/bader/apex/cross check/fechser. supply to be made along with test certificate from nabl approved labs. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43530159

26 Jan, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of draft tube cone assembly as per drg. no. 22340892303

Central Government / Public Sector

CTN :43534631

02 Feb, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of set of 07 items for wheel set earthing equipment for lhb coaches. (1.) isolating bush for wheelset earthing equipment (for lhb type coaches) conforming to specification ep-4030 and to rcf drawing no. lw71244, alt.- a/nil. qty.- 10 nos/set. (2.) bracket ( for wheel set earthing equipment in lhb coaches) conforming to is specification is: 2062-84 fe410.wc and to rcf drawing no. lw71247, alt.- nil. qty.- 02 nos/set. (3.) spring for cover for wheel set earthing housing (for lhb type coaches) conforming to is specification is:4454-2005 spring steel and to rcf drawing no. lw71250, alt.- a/nil. qty.- 01 nos/set. (4.) cover hinge tube for earthing brush assembly (for lhb type coaches) conforming to is specification is:319-69 tab-1, brass and to rcf drawing no. lw71253, alt.- nil. qty.- 01 nos/set. (5.) cover pin dia 5x52 for wheel set earthing equipment (for lhb type coaches) conforming to is specification is:2062-64 42wc and to rcf drawing no. lw71254, alt.- a/nil. qty.- 01 nos/set. (6.) o-ring dia 140x2 conforming to neoperene rubber (60% neoprene & 40% rubber) and to rcf drawing no. lw71232,item-05, alt.- f/nil. qty.- 02 nos/set. (7.) o-ring dia 30x2 conforming to neoperene rubber (60% neoprene & 40%rubber) and to rcf drawing no. lw71232,item-06, alt.- f/nil. qty.- 02 nos/set. note : item to be procured from uvam id : rcf item id: 2400031 approved sources only. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :42941512

22 Jan, 2026 NA

Anpara - Uttar Pradesh

Tender For corrigendum : supply of misc items for ffsd-i & ahd btps anpara - ht hex head full thread nut & bolt ; m16x65 mm,, ht hex head full thread nut & bolt ; m16x70 mm,, hthh bolt with nut & washer , half threaded m16x90, hex hd m18x70; ht 10.9 grade, ms bolt & nut size 20x70 mm, ht hex bolt & nut 20x80fth, fluidizing pads for esp hoppers, size: 374 mm x 374 mm, no. of holes: 16, hole dia: 12 mm material: nomex (as per sample), perforated ms plate, size: 374 mm x 374 mm, having 4.76 mm dia holes at 7.14 mm pitch giving 40.5 % open area plate thickness: 1.6mm, no. of mounting holes: 16, hole dia: 12 mm (as per sample), submersible pump, make-kirloskar, model-eterna 1100 cw+ specification : power supply-415v, 3phaseacpower rating-1.1kw/1.5hpmax. solid handling size (mm) - 24minimum submergence (mm) - 460suction - from bottomsize discharge outlet (mm) - 50max. amb. temperature - 40 degree cdischarge 366 to 84 lpmtotal head - 6 to 14 mtrsspeed (nominal) 2800 rpm, discharge tube with fmb(foam making branch) for mechanical foam extinguisher 50 ltr. discharge tube shall be braided rubber plasticof 3.5 mtr length & 12.5 mm internal dia. fitted with plastic fmb (is-7328) as per is-13386 the discharge hose shall have bu stingpressure of not less than 50 kg/cm . (as per sample), discharge tube for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit withdcp fire extinguisher (plunger type) capacity 5 kg and other end to discharge powder.(as per sample), discharge tube washer for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of rubber suitable to be fitted withdischarge tube of dcp fire extinguisher (plunger type) capacity 05 kg.(as per sample), discharge tube for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit withdcp fire extinguisher (plunger type) capacity 10 kg and other end to discharge powder.(as per sample), discharge tube washer for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of rubber suitable to be fitted withdischarge tube of dcp fire extinguisher (plunger type) capacity 10 kg.(as per sample), cap rubber washer for dcp(dry chemical powder) 75 kg extinguishers.made of rubber, suitable to fit in the cap assembly of dcpfire extinguisher capacity 75 kg.(as per sample), discharge tube for dcp 75 kg extinguishers. discharge tube/hose with nozzle squeeze grip aluminum lengths -5 mtr. suitable fordcp type fire extinguisher capacity-75 kg.(as per sample), washer for copper connecting tube 75kg dcp(dry chemical powder) extinguisher. made of rubber. suitable for fitting with copperconne cting tube of dcp 75 kg extinguisher.(as per sample), discharge tube for 9 ltr water type extinguishers (squeeze grip type). pvc braided tube/hose of length 400 mm. suitable for fittingwithin the thread of squeeze grip assembly of water type fire extinguisher capacity 9 litre (squeeze grip type).(as per sample), discharge tube washer for 9 ltr water type extinguishers (squeeze type). made of rubber. suitable to be fitted with discharge tube/hoseof water type fire extinguisher (squeeze grip type) capacity 09 litre.(as per sample), port tube for 9 ltr water type extinguishers (squeeze grip type). port tube/actuator should be made of aluminium. suitable to fit insidecap assembly of water type fire extinguisher capacity 9 litre (squeeze grip type) for release of water when activated. as per sample), siphon tube for 9 ltr water type extinguishers (squeeze grip type). siphon tube suitable for 9 ltr. water type extinguishers (squeezegrip type).(as per sample), cap assembly for 9ltr water type extinguishers (squeeze grip type). it should include a brass forged valve and a squeeze grip foractivation to facilitate the discharge of water. suitable to be fitted in 9l water type extinguishers (squeeze grip type).(as per sample), cap assembly washer for for 9 ltr water type extinguishers (squeeze

corporations/Associations/Others

CTN :43258337

19 Jan, 2026 7.51 Lacs

Bokaro - Jharkhand

Tender For corrigendum : procurement of different types of switchyard hardware for ctps dvc d d - 33kv fixed contact assembly of hivelm isolator (double jaw) for 2000a, copper tee plate for double fix contact of 33kv hivelm isolator, connector rigid for cu make wave trap; 30mm dia. stud to twin lark conductor,condu ctor portion of crimping type & separated, with sim,nut,bolt & washer., connector flexible cu, 2 fold, 460 mmx 50 mmx 12 mm each length of compressed strip of 55 mm, hole not required, male contact tip for ite isolator, rigid type normal isolator pad connector suitable for 1½ inch ips al. tube and 2000a continuous current, connector flexible for abb make iso. pad to 2 ½ inch id al. pipe bus, connector rigid suitable for hivelm make isolator pad to 2 ½ inch ips al. pipe bus., connector wave trap 30mm dia cu stud to lark conductor, conductor portion of compression type and separated with necessary sim, nut, bolt and washer, connector flexible suitable for hivelm make isolator pad to 2 ½ inch ips al. pipe bus, connector rigid for 132 kv bimco isolator pad 2 ½ al. pipe bus, 132kv ct stud(stud dia 40mm)to 2.5 inch ips al pipe expansion type extruded al connector with bimetalic sleeve.

Aluminum Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors