Tender For auction sale of depot miscellaneous scrap - verticle turrent lathe : actual lot no. 031126040077; pl no.98325012 (01); [hsn code: 85043300;gst@18% on fcm basis] cond and u/s scrap of vertical turret lathe make : kirloskar. main parts -job holdig chuck -01nos,turret-01nos,guide ways-02nos ,motors -03nos(30kw,3.7kw,7.5kw) ,gearbox-01nos ,spindle arrangement-01ns ,tool holder-01nos etc. (total weight: 8000 kg approx).machine removed from its original place and kept aside with all the parts full or broken. with or without attachments/parts. said to contain, copper: 40 kg, ms: 7960 kg approximately. note: mode of disposal of item as is where is basis ,special conditions will apply. delivery on 01 no by lot, location :wheel shop bay 3 (image attached)
Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous and miscellaneous, material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, rubber items ,spring plank, pantograph with or without pneumatic motor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, plastic, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. wooden and railway track shall be excluded from the lot if found any.digging will be permitted only
Tender For auction sale of others - scrap released of condemned , overaged ferrous m and p items such as etp and incinerator plant of capacity 2 kld, make: b. i engg. vatva ahmedabad, year of commissioning 2008, qty of machine /plant is 01 number , located at diesel loco shed bandra with or without nf attachments and comprising of following accessories : 1] 02 nos ms tanks, 2] 01 no. diesel tank, 3] chimney, 4] chimney ladder 01 no, 5]girder 01 no loose,6] ladder 01 no. loose , 7] sand filtration tank 02 nos., 8] angles and channels , 9] ms pipes 06 nos., 10] chequer plates 10 nos., 11] chemical reaction vessel with motor of 1.5 hp, 12] compressor with 5 hp motor (single cylinder), 13] water pump connected motor of 05 hp with frame, 14] gear box with motor 1.5 hp with frame, 15] fuel and water pump with motor 05 hp with frame , 16] f and fan with fitted electrical motor 10 hp. having all parts off sorts , types, makes, broken/unbroken, burnt / un-burnt, damaged /undamaged , with or without rust, dust, oil paint , adhesive , wet and grease. plant custodian : sse/dsl/ba , mode of delivery by number, to be sale on as is where is basis, loading by purchaser. appx. disposable weight of plant is 11.6 mt note : 1] purchasers are requested to see/inspect m &p machinery/plant/ site before bidding. no claim will be entertained from purchaser's end after sale. 2] cutting is permitted if felt necessary.3] delivery will be given after full and final payment only 4] fdp 50 days 5] all delivery dates will be fixed through ireps. purchasers are advised to submit online request through ireps system at least 07 days before for fixation of delivery dates after preparation of delivery order.
Tender For auction sale of depot miscellaneous scrap - lot no.m.nf-99.exmp.e & gdn-2.04.2026-27.01 description- scrap cond.motors of all types,brushless alternator (our offer) scrap cond. point machine motor, tr motor and other types of motors as in the lot in one place at "e" sector & in one place at "gdn-2". before bidding bidders are requested to inspect the lot. tare and gross weight of the vehicles are to be recorded while giving sale delivery to the purchaser. loading will be done by purchaser's own arrangement.
Tender For auction sale of depot ferrous scrap - 98080015 scrap us cast iron comp. of signalling 2 and 3 aspect units, pulley, wheel, signal pole base/light post, pipe, t2 lock, tljb, ci weight, mechanical lift & barrier, cls unit, epd, tarsal, cb, pedestal, gfp cocks, cst-9 sleeper and air brake items such as- cutoff angle cock, cr, lsd, sab, dirt collector, annual repair strip, ci pipes, other ci signalling and machine parts off sorts and sizes with or without attachments of ms/ss/non-ferrous and e wires if any. cond. 1 loading by purchaser 2. delivery in only rto registered vehicle. location:- rcc bin-b-14 & b-7. note: - all purchasers annual repaire kindly requested to communicate through ireps only for matters related to power of attorney, delivery orders (do), delivery dates, and other relevant correspondence. offline requests shall not be entertained. requests (related to final delivery) shall be placed atleast seven days in advance so that there is sufficient time with competent authority for scheduling of scrap delivery.
Tender For auction sale of depot miscellaneous scrap - old weighing machine- 98325012 (01) cond & u/s scrap of old weighing machine with weighing stones, with or without components/parts in full/partial damaged condition. total quantity- 01 nos, total gross weight- 710 kgs. approx. hsn code: 72041000, gst@18% on forward charge basis. note:1) delivery on number basis only. 2) crane loading is permitted for delivery. 3) purchasers/firms are requested to physically inspect the lot before offering their bids. 4) post auction no representation shall be entertained. location: non-ferrous yard middle opp bin no.1(weighing machine), non-ferrous ward bin no:21(weighing stones) (ds8 no: 092976-25-00317 dt. 28/03/26)
Tender For auction sale of others - scrap miscellaneous item(1)main & stand by computer each processor consisting of pentium iii based on latest 600 mhz 32 bit 128 mb ram, 20gb hdd 52 cd drive (writable) 1.44 mb fdd, 104ms window compatible key board & mouse, 15" colour svga monitor with network card & tcp/ip protocol,2nos(2)communication server pentium ii based pc or latest 600 mhz 32bit 128 mb ram, 20 gb hdd, 52xcd drive (writable) 1.44mb fdd,104 ms window compatible key board & mouse, 15" colour svga monitor with network card & pcp/ip protocol.,2nos(3) man & stand by work station each consisting of pentium iii based pc or latest with minimum 128mb,ram 20 gb hdd, 52xcd drive 1.44 mb fdd & speed 600 mhz along 3nos. 19" svga fully graphic colour vdus with each machine will have it separate alphanumeric key board & mouse b67 network card & tcp/ip support multimedia kit should be available to give distinguishing alarm to tpc with network card & pcp/ip protocol,5nos(4) laser coloured data logging printer suitable for printing a3 size paper (with minimum 600x3000 dpi resolution),2nos(5)indication switching pannel to display ups alarm/status,1no(6)master clock & slove clock,3nos(7)front end driver (display),3nos(8)2x5 kva dual load sharing ups system,1no(9)server computer & fep computer,4nos(10)work station computer,4nos(11)ac modem,4nos(12)dot matrix printer,2nos(13)scada software for dual hot stand by stand by system(cd)(1-13)location-sse/rc/ddu,note-pc-17nos.,dot matrix printer-02nos,colour printer-02nos,electronic device-06nos,cloc-03nos,cd-01no,total weight of electronics items-473kg,ups-1 set, total wt-375kg(ferrous-353kg,non-ferrous-22kg)
Tender For corrigendum : auction sale of depot miscellaneous scrap - 98325061 scrap condemn machine consisting of: - (1) unserviceable released self-propelled light weight motor trolley with or without attachment (dismental condition) qty.= 01 nos. (2) unserviceable released self-propelled light weight motor trolley with or without attachment = 03 nos (3) unserviceable released diesel platform truck 4.8 hp with or without attachment (dismental condition) qty. = 05 nos. total = 09 nos. note: - private crane allowed for easy loading purpose.
Tender For auction sale of others - total qty.= 7 mt, description:- turning and boring chips (scrap from tt cnc machine).(remarks - material to be sold on as is where is basis and material will be delivered in weight.)