Latest analytical weighing balance Tenders | Government analytical weighing balance Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

Central Government/Public Sector

CTN :38569280

23 Dec, 2024 NA

Lucknow - Uttar Pradesh

Tender For supply of on site ready portable primary current injection -wound secondary kit with all accessories. ( 1 phase variac transformers & power cable -95 sq. mm. *3mtr.) range: 0- 1000 amp. weight: 16 kg.(as pe r specification attached as annexure -a) make: scope t&m, & model: prima or similar ) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604410

24 Dec, 2024 NA

Lucknow - Uttar Pradesh

Tender For supply of ball valve for sanitary facilities for lhb coaches drawing no.: - lw 63106 alt.(a), item-3. drawing no. lw 63106 alt.(a) for item-3 is for tender purpose only. supplier has to submit detailed dra wing at the time of participation in tender with confirmation of weight of item. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38604240

20 Jan, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of heavy duty high capacity for the toughest cut out apparatus. dimension 25 6x520x400 mm (w/l/h). no load speed 3800 rpm. disc diameter 352 mm .weight 18 kg. disc b ore 25.4 mm. input power 2400w. category subdivision metal cut-off saw. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :38597770

27 Dec, 2024 78.00 Lacs

Jaisalmer - Rajasthan

Tender For ungalvanized welded mesh (1.5 meter width, with square of 12cm x 12cm ungalvanized steel wire, 14 gauge) (each roll of 30 meter minimum weight 22 kg)

State Government

CTN :38597791

27 Dec, 2024 71.76 Lacs

Jaisalmer - Rajasthan

Tender For ungalvanized welded mesh (1.2 meter width, with square of 12cm x 12cm ungalvanized steel wire, 14 gauge) (each roll of 30 meter minimum weight 18 kg)

Central Government/Public Sector

CTN :38590143

04 Jan, 2025 NA

Bhagalpur - Bihar

Tender For supply of competition kettle bells (q3) , rubberized weight dumbbells (q3) , multi adjustable bench (v2) (q3) , rubberized weight plates (q3) , weight lifting set (v2) (q4) , flat gym bench (v2) (q4) , commercial air bike (q4) , triceps bar (q4)

corporations/Associations/Others

CTN :38519134

31 Dec, 2024 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For supply of 80mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 8.53 kg per metre , 65mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 6.54 kg per metre , 50mm dia gi pipe med grade screwed and socketed as per is 1239, weight not less than 5.10 kg per metre , 80mm dia gm gate valve heavy duty , 80mm dia gi union socket , 80mmx80mmx80mm dia gi tee , 80mm dia gi bend , 80mm dia gi coupling socket , 80mm dia gi elbow , 80mm dia gi nipple 6 inch lenghth , synthetic enamel paint , 80mmx 65mm dia gi reduser , 65mm dia gi union sosket , 50mm dia gi union sosket , 65mm dia gi nipple 6 inch length , 65mm dia gi bend , 65mm dia gi coupling socket , 65mm dia gi elbow , 65mmx 50mm dia gi reduser , 50mm dia gi nipple 6 inch length , 50mm dia gi bend , 50mm dia gi coupling socket , 50mm dia gi plug

Central Government/Public Sector

CTN :38556420

02 Jan, 2025 NA

Gautam Budnagar - Uttar Pradesh

Tender For supply of bid for stationary items - attendance register , batteries , binder clips , binding machine , black hit , blade for paper cutter , board pin , bond paper , borosil glasses , bowls , brown tape , bucket , calculator , cardboard file holder , cartridge toner , cello tape , cloth duster , cloth stand , coaster , cobra file , component cleaner , computer keyboard , computer mat , computer mouse , correction pen , diary , dishwash , door bell , door mat , door stopper , double hole punch machine , double sided tape , drawing sheets , dustbin bags , electric extension board , electric kettle , eraser , fevicol , fevistick , file board , file tag thread , foot mat , foot rest , glass cleaner , glossy photo paper , hammer , hand sanitizer , highlighter , index register , index or box file , induction heater , ink bottles , laser pointer , lp bond solvent , masking tape , mosquito repellent , multi-plug , my clear bag , note pad , notice or pin board , paper cutter , paper towel , paper weight , paste it pads , pen , pen drive , pen refills , pen stand , pencil , permanent marker , photocopy paper , plastic folder , plastic jug , plier , register , room freshener , rope , scale , scissor , screw driver set , scrubber , serving tray , sharpener , single hole punch machine , sketch pen , soap , stamp pad , stapler machine , staples , sticky note , sticky notes , sugar , sugar cubes , surf excel , surgical mask , tea bags , tea cups , tea thermos , tissue paper box , transparent folder leaf , u clip , wall clock , water bottle , white board duster , white board marker , white paper envelope , window lock bid number/ ( ( ) ): gem/2024/b/5669359 dated/* : 12-12-2024 bid document/ 1 1 / 87

Central Government/Public Sector

CTN :38604827

23 Dec, 2024 NA

Jhansi - Uttar Pradesh

Tender For supply of cast steel wedge (for nested springs) for light weight low height 25t axle load bogie ( lwlh25) of boxns wagon to rdso drg. no. wd13012-s-06, alt-nil, item no.01.. [ warranty period: 30 mon ths after the date of delivery ]

Analytical Weighing Balance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors