Get complete information related to latest Angle Bars Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Angle Bars Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Angle Bars Tenders.
Tender For supply of safety items - gloves rubber acid proof 16 inch gloves should be resistant for highly concentrated acid and bases., goggle, chemical splash protective goggles should be resistant for highly concentrated acid and bases., chemical protection suit, this suit must cover all the body size: xxl, protection coverall suit must be resistant for highly concentrated acid and bases., acid gases e2 cannister (en 148-1 class 2), gum boots size 10 inch gum boots must be resistant for highly concentrated acid and bases., self-contained breathing apparatus (complete kit including cylinder), self contained open circuit automatic positive pressure compressed air breathing apparatus set confirming to en137:2006 type 2 and cbrn approved, with 6.8 liters/300 bar aluminum lined fully wrapped carbon composite material compressed air cylinders approved to en 12245 and ce marked, as per following specifications., complete specifications are attached in a separate sheet., copy of following approvals shall be attached with bid., scba set: ce marked, en 137: 2006 type 2 approval and cbrn approval., facemask: en 136: class 3, cylinder: ce marked en 12245 and ccoe approved, cylinder valve: en 144 approved, venus v-44 + ffp1s fold flat mask, gloves, size:14 inch, material: asbestos gloves must be with high quality material and should be durable., apron suitable to handle sulphuric acid (h2so4), apron should be with long sleeves and bottom up to knee., size: xxl apron should be resistant for highly concentrated acid and bases., face shield, the face shields must be resistant for highly concentrated acids and bases.
Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c
Tender For supply of laboratory consumables d d -micro centrifuge tubes 1_5 ml , micro centrifuge tubes 2 ml , flask conical narrow mouth graduated 2 l , measuring beaker with handle pp 2 l , beaker pp 1 l , beaker pp 5 l , filter paper qualitative medium 702 grade 1 , blotting paper sheets , forceps stainless steel blunt 6 inch , forceps stainless steel blunt 8 inch , forceps stainless steel pointed 8 inch , forceps stainless steel, blunt 10 inch , seedling trays_ protray_ medium sized , magnetic stirring bar 2 pc each of 8x14_ 8x20_ 8x30_ 8x40 and 1 pc of 8x50_ 8x65 , magnetic bar retriever , zip lock bags 5 inch x 7 inch , zip lock bags 8 inch x 10 inch , slider zipper storage bags 7 inch x 8 inch , slider zipper storage bags 11 inch x 12 inch , aluminum tags 1 inch x 3 inch , microscope slides plane imported , cuvettes quartz , cover glass 24x 60 mm , paper card sheet tags 8x3 cm , jerrican 10 lit , aluminum pouches 10x20 cm , aluminum pouches 16x22 cm , aluminum pouches 23x30 cm , synthetic tags 8x3 cm with thread , pots for plantation _plastic_ 12 inch upper dia , sprinkler can 5 lit , ice tray 4 lit , yellow sticky trap 10 traps per pk , gloves slash and cut resistant 50 x 2 ply pack of 12 , ethanol 99_9 percent pure 500 ml , muslin bags 60x45 cm , forceps ss 6 inch pointed , qualitative filter paper grade 42_ 125 mm , tissue paper roll lint free 50x 2 ply, pack of 12 , nitrile gloves blue thin pack of 100 , laboratory face mask disposable pack of 100 , nitrile glove purple thick pack of 100 , nitrile glove blue thin pack of 100 , pipette 1 ml to 10 ml , pipette 1 ml to 5 ml , tissue paper roll 50 x 2 ply pack of 12 , cotton absorbent pack of 6 , cotton non absorbent pack of 6 , brush small test tube pack of 6 , brush big test tube pack of 6 , aluminium foil 9 mtr 13 u , aluminium foil 1 kg 18 u , glasware washing soap 5 ltr , liquid hand wash 200 ml with pump , liquid hand wash 750 ml refill , laboratory face mask cotton pack of 5 , multipurpose labeling tape 0_75 inch x 500 inch , triangular spreader stainless steel , cotton non absorbent
Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28-ea-0957) - 1 high pressure hose reel with 60mmlg x 19 mm (ø) with fog gun and spray type , 2 low pressure hose reel with 19 mm ø x 50 mm long hose with duel purpose shut off nozzle. 3 extension ladder 10.5 metre , 4 delivery hose 63 mm rubber lined in 30 m length (type a of is 636/79/5) complete with instantaneous coupling. , 5 long line 50 mm circumference 30 m long as per is 1084 , 6 short line 50 mm circumference 15m length as per is 1084 , 7 protective clothing for fireman complete with golves,boots,helmets with suitable face shield made out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame.the suit will be of sufficient size to accomodate a breathing apparatus to users (item should be packed in hard body box). , 8 fire hook , 9 fire man axe , 10 sledge hammer , 11 carpenter saw , 12 pick axe , 13 ceiling hook , 14 crow bar made of carbon steel , 15 self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit) , 16 dividing breeching , 17 collecting breeching , 18 pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long. , 19 suction strainer for item 2 , 20 basket strainer suitable for item 4 , is : 3582 , 21 dividing breaching with control arrangement as per is : 5131 , 22 collecting breaching as is : 905 , 23 hose bandages rubberized is : 5612 , 24 hose clamps is : 5612 , 25 water curtain nozzle made of m .s .plate with g . m instantaneous connection , 26 branch pipe short ( chromium plated) is : 903 , 27 a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ) , 28 adapter for 100mm suction female thread and 63mm male instantaneous 29 adaptor double female instantaneous pattern 63mm . , 30 adaptor double male instantaneous pattern 63mm , 31 hand lamp ( 4cells ) , 32 rubber gloves 33kv 1 pair , 33 fire beater , 34 foam pick up tube , 35 rubber gloves as per is 4770 - 1991 for 5000 volts , 36 leather gloves is 6994 – 1977 , 37 jack hydraulic for 20 ton capacity with handle , 38 hand controlled branch for 63 mm size hose coupling , 39 hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy. , 40 bolt cutter – 600mm long , 41 shovel with handle , 42 minimum 12v halogen fog & spot lamps , 43 hose ramp
Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28- ea-0957)against tn-sc-638/2025-26(mm) - high pressure hose reel with 60mm lg x 19 mm ( ) with fog gun and spray type, low pressure hose reel with 19 mm x 50 mm long hose with duel purpose shut off nozzle., extension ladder 10.5 meter, delivery hose 63 mm rubber lined in 30 m length (type b of is 636/79/5) complete with instantaneous coupling., long line 50 mm circumference 30 m long as per is 1084., short line 50 mm circumference 15m length as per is 1084., protective clothing for fireman complete with golves, boots, helmets with suitable face shield mad out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame. the suit will be of sufficient size to accommodate a breathing apparatus to users (item should be packed in hard body box)., fire hook, fire man axe, sledge hammer, carpenter saw, pick axe, celling hook, crow bar made of carbon steel, self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit), dividing breeching, collecting breeching, pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long., suction strainer for item 2, basket strainer suitable for item 4 , is : 3582, dividing breaching with control arrangement as per is : 5131, collecting breaching as is : 905, hose bandages rubberized is : 5612, hose clamps is : 5612, water curtain nozzle made of m .s .plate with g . m instantaneous connection, branch pipe short ( chromium plated) is : 903, a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ), adapter for 100mm suction female thread and 63mm male instantaneous, adaptor double female instantaneous pattern 63mm ., adaptor double male instantaneous pattern 63mm, hand lamp ( 4cells ), rubber gloves 33kv 1 pair, fire beater, foam pick up tube, rubber gloves as per is 4770 - 1991 for 5000 volts, leather gloves is 6994 1977, jack hydraulic for 20 ton capacity with handle, hand controlled branch for 63 mm size hose coupling, hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy., bolt cutter 600mm long, shovel with handle, minimum 12v halogen fog & spot lamps, hose ramp
Tender For corrigendum : supply of repair and upgradation of troops waiting area at army enviromental park : : -replacement of existing roof of structure , ms square pipe and ms flat bar , repair of outer walls of structure , rain drainage pipe , electrical work , paint work complete , fitting of aluminum windows and doors for ventilators