Latest angle iron truss Tenders | Government angle iron truss Tenders

CTN :43467913

16 Jan, 2026 2.80 Lacs

Ahwa - Gujarat

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for floodlight (v2) conforming to is 10322 (part 5/section 5) (q3)

State Government

CTN :42940915

19 Jan, 2026 69.73 Lacs

Umaria - Madhya Pradesh

Tender For corrigendum : procurement of erw ferrules and carbon steel erw sleeves for tubular type air pre-heater of unit no. 1 to 4 for ph-i, ii at sgtps, mppgcl, birsinghpur. - carbon-steel ferrule for tubular aphmaterial:- erw carbon steel tubes as per bs:3059:part-ierw-320 fully killed steelfor fitting in top end tube ferrules, o d: 57.5 mmthickness: 2.25 mmlength: 250 mmmaterial: erw carbon steel tubes as per bs-3059:part-ierw-320 fully killed steeldrawing no.- sgtps/bmd-ii/a/01, o d: 57.5 mmthickness: 2.25 mmlength: 100 mmmaterial: erw carbon steel tubes as per bs-3059:part-ierw-320 fully killed steeldrawing no.- sgtps/bmd-ii/a/02, carbon-steel sleeves for tubular aphmaterial:- erw carbon steel tubes as per bs:3059:part-ierw-320 fully killed steelfor fitting in top end tube ferrules, o d: 52 mm ,thickness: 3 mmlength: 250 mmmaterial: erw carbon steel tubes as per bs-3059:part-ierw-320 fully killed steeldrawing no.- sgtps/bmd-ii/b/01, o d: 52 mm ,thickness: 3 mmlength: 100 mmmaterial: erw carbon steel tubes as per bs-3059:part-ierw-320 fully killed steeldrawing no.- sgtps/bmd-ii/b/02, .

Central Government/Public Sector

CTN :43458855

20 Jan, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For fabrication and supply of pressure part tubular products (panels, coils and loose tubes) for sccl singareni through ovm route with vendors material (ovm)

Central Government/Public Sector

CTN :43210945

20 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : procurement of networking items for computer and campus wide networks at clri under rate contract - procurement of networking items for computer and campus-wide networks at csir clri under a rate contract, 15u network rack fully loaded (indoor), 12u network rack fully loaded (indoor), 9u network rack fully loaded (indoor), 6u network rack fully loaded (indoor), 15u network rack fully loaded (outdoor), 12u network rack fully loaded (outdoor), 9u network rack fully loaded (outdoor), 6u network rack fully loaded (outdoor), 24-port patch panel fully loaded, 48-port patch panel fully loaded, 6-port power strip (15amp & 5amp compatibility - universal socket) network rack mountable 1.5m power cord, weatherproof outdoor junction box ip67 - wall mounted / pole mounted (dimension - 220*170*110 mm), floor-mounted weatherproof outdoor junction box ip67 (dimension -600*800*600 mm) powder coated, 6-port liu fully loaded, 12-port liu fully loaded, 24-port liu fully loaded, fibre optic pigtail, liu coupler, category 6 - 1 metre patch cord, category 6 - 2 meter patch cord, category 6 - 305 metre cable box, 100/50 mm pvc trunk, single port rj45 face plate cms mounted with keystone jack, dual port rj45 face plate cms mounted with keystone jack, 25mm pvc pipe (3 metre), 50mm pvc pipe (3 metre), pvc casing capping - 1 inch, pvc casing capping - 1.5 inch, pvc casing capping - 2 inch, rj45 backbox with single face plate, rj45 backbox with dual face plate, rj45 keystone jack, rj45 connector box (100 nos), duplex lc-lc fiber optic patch cord - 2 metre, duplex sc-lc fiber optic patch cord - 2 metre, duplex sc-sc fiber optic patch cord - 2 metre, single-mode fiber optic cable (9/125 m (micro-meters) - 6 core, single-mode fiber optic cable (9/125 m (micro-meters) - 12 core, 1g sfp module single mode 10km (hp/aurba compatibility), 10g sfp+ module single mode 10km (hp/aurba compatibility), hdpe pipe - 1 inch, hdpe pipe - 2 inch, hdpe pipe - 3 inch, hdpe pipe - 5 inch, hdpe pipe - 6 inch, mild steel (ms) tubular pole (is 1161 / is 2713 part ii compliant) 4 meter height - (dimension 114 mm (4.5 ) top: 76 mm (3 )), mild steel (ms) tubular pole (is 1161 / is 2713 part ii compliant) 5 meter height - (dimension 114 mm (4.5 ) top: 76 mm (3 )), single arm (l-type) with accessorieslength: 1 ft.arm material: gi / ms pipe, powder-coated, single arm (l-type) with accessorieslength: 1.5 ft.arm material: gi / ms pipe, powder-coated, double arm (l-type) with accessorieslength: 1 ft.arm material: gi / ms pipe, powder-coated, double arm (l-type) with accessorieslength: 1.5 ft.arm material: gi / ms pipe, powder-coated, optical termination box (otb) 2 core / 4 core, rating: ip55 ip65, cable entry ports: 2 4 main entries, 8 24 drop ports. dimension: 120 90 30, wall mount (indoor)material: pc+abs, powder-coated steel, or stainless steel, optical termination box (otb) 8 core, rating: ip55 ip65, cable entry ports: 2 4 main entries, 8 24 drop ports. dimension: 180 120 40, wall mountmaterial : pc+abs, powder-coated steel, or stainless steel, optical termination box (otb) 12 core, rating: ip55 ip65, cable entry ports: 2 4 main entries, 8 24 drop ports. dimension: 200 150 50, wall mount or pole mountmaterial : pc+abs, powder-coated steel, or stainless steel, optical termination box (otb) 24 core, rating: ip55 ip65, cable entry ports: 2 4 main entries, 8 24 drop ports. dimension: 230 200 60, wall mountmaterial: pc+abs, powder-coated steel, or stainless steel, metal marker plate with ofc engravedmaterial: gi (galvanized iron)/aluminum sheetthickness: 2 3 mm, dimensions: 150 100 mm / 200 150 mmbackground color: orange/red, letter color: white/blackmounting type : floor mounted, mounting height: ~1.2 to 1.5 m from ground level, poe injector ieee 802.3af/at, 30 60 w, media converter 1g single-mode (sc/lc), power and electrical items (supporting network equipment), power cable - 3 core 2.5 sq.mm cu flexible (isi), power db box - ip65, 16a mcb + surge protector, industria

CTN :43421037

12 Jan, 2026 NA

Kamrup - Assam

Tender For supply of mm shaped dorsal distal radius locking plate variable 3 holes in distal horizontal part and 3dash6 holes in longitudinal part with 4 x locking and 1 x cortical mri safe , 2dot4slash2dot7 mm l shaped dorsal distal radius locking plate variable angle with 2 holes in distal horizontal part and 3dash6 holes in longitudinal part with 4 x locking and 1 x cortical mri safe , locking opening wedge tibial osteotomy plate for 7dot5mm to 17dot5mm wedges increments of 2dot5mm with 4 locking cancellousslashcortical screws titanium implants and ce certified , anti rotation proximal femoral nailing system 15consisting of antirotation proximal femoral nail 01 noscoma lag screws 01 nos distal screws 02 nos , knee arthroscopy punch , knee arthroscopy scissor , disposable pulse lavage system dot approvedslashregistered , tubular external fixator for lower limblower limb tibia set 04tubular rod 09 inch long plus universal clamp dash15plus4dot5 mm dia 06 inch long sentze screw 06 rod to rod clamp 06 , arthroscopic pump tubing set with two puncture needles , aggressive cutter shaver blades for arthroscopoic shaver systemdot implants should be dot slash ce european certifiedcoma sterile packed arthrexdotbox of five , interlocking cannulated anatomical femoral nailstrochantric entry5dash 7 degrees proximal offsetright and left with option of gt to lt lockingslash transverse locking with 4x 5slash4dot9 mm , knee scorpion is todash the single portal suture passer with low profile 5 degree up curve and 3dot2mm narrow and 4dot6mm widthcoma it must be a resuable device to be used , wire kirschner 20 cm long x 1mm diacoma 316 lvm stainless steeldot , wire kirschner 20 cm long x 1dot5mm diacoma 316 lvm stainless steeldot , threaded kdashwires stainless steel 2dot0mm diacoma150mm lengthcoma 316 lvm stainless steeldot , ao pattern locking compression plates 6 holes 3dot5mm with 7 x 3dot5mm locking and 2 x 3dot5mm cortical screws dashtitanium complete constructdot , 2dot7slash3dot5 mm locking mid shaftslash distallateral end clavicular locking plate for superior placement right 8 holes with 5 locking and 2 cortical screws c implants mri safe , 3dot5 mm lcp posteriodashlateral distal humerus plate rt lateral extension 6 holes for shaft and 4dash5 holes for articularslashextra articular lateral condylar fragment , 2dot4slash2dot7 mm volar distal radius locking plate with 5 holes in horizontalslashoblique distal part in a single row and 3 holes in longitudinal part of plate with 5 x locking , 2dot4slash2dot7 mm volar distal radius locking plate with 5 holes in horizontalslashoblique distal part in a single row and 5 holes in longitudinal part of plate with 5 x locking , 3dot5mm lcp for proximal lateral tibia minimum 3 rafting screw for subchondral part and 3dash4 screws in metaphyseal region options and 5holes for shaft with 8 x 3dot5mm , 3dot5mm lcp for proximal lateral tibia with minimum 3 rafting screw for subchondral part and 3dash4 screws in metaphyseal region options and 6 holes for shaft with 8 x 3 , predash sterile hydrofiber skin friendly flexible waterproof dressing size 9x15 cm , predash sterile hydrofiber skin friendly flexible waterproof dressing size 9x25cm , predash sterile hydrofiber skin friendly flexible waterproof dressing size 9x30 cm , fiber stitch all inside meniscal repair , ao pattern 4dot0 mm partially threaded cannulated cancellous screws 20 to 80 mm length with washer titaniumcoma should be mri safedot , ao pattern 6dot5mm cannulated cancellous screwcoma fully //bid details2 / 90threadedcoma selfdashtappingcoma length 30mm to 85mm with washer titaniumcoma should be mri safedot , ilizarov fixator frame for deformity correction tibia adult consisting of 8 x 160 mm half ringscoma 2 x 160 mm 5slash8 ringscoma 1 x 160mm foot framecoma 10 x cannulated , disposable screen cover and trolley cover dotslash dot full quality assurance , saw blades 1dot27mm for bpl2 synthes power system smallslashmediumslash broad , vertical isolation dra

State Government

CTN :43370920

08 Jan, 2026 NA

Jharsuguda - Odisha

Tender For supply of lighting pole or post and hardware - tubular street light poles (v2) (q3) , led luminaire for road and street lights (v2) conforming to is 10322 (part 5 / section 3) (q3)

Central Government/Public Sector

CTN :43369992

19 Jan, 2026 25.59 Lacs

Dipka - Chhattisgarh

Tender For supply of 36mm as per is 2028 and is 6131 , double end wrench bsw thread 12mm x 13mm as per is 2028 and is 6131 , double end wrench bsw thread 16mm x 17mm as per is 2028 and is 6131 , double end wrench bsw thread 18mm x 19mm as per is 2028 and is 6131 , double end wrench bsw thread 36mm x 41mm as per is 2028 and is 6131 , double end wrench bsw thread 46mm x 50mm as per is 2028 and is 6131 , double end wrench bsw thread 24mm x 27mm as per is 2028 and is 6131 , double end wrench bsw thread 30mm x 32mm as per is 2028 and is 6131 , tubular box wrench set 6mmx7mm to 20mmx22mm , tubular box wrench set 6mmx7mm to 30mmx32mm , vernier caliper digital type measurement range 0 to 300mm type a with jaws on both sides for external andinternal measurements calibration , flat chisel 16mm x 150mm as per is 402 , screwdriver 450mm as per is 844 , screwdriver two in one 250mm , screwdriver two in one 200mm , screwdriver set different sizes 75mm to 300mm 20 nos , flat hand file rough length 12 inch as per is 1931 , flat hand file smooth length 12 inch as per is 1931 , half round hand file rough length 12 inch as per is 1931 , round hand file rough length 12 inch as per is 1931 , hammer sledge type 6lbs , hammer double faced sledge type 8point2 kg , grinding wheel abrasive grit dca24 180mm x 7mm x 25point23mm , adjustable slide wrench 300mm as per is 6149 and is 6131 , measuring tape steel 15 meter length , measuring tape steel 3 meter length , spirit level guage plated top and bottom 300mm , pipe wrench 300 mm length conforming to is 4003 part 1 , pipe wrench 600 mm length conforming to is 4003 part 1 , hacksaw blade length 300mm 18tpi conforming to is 2594 , digital multimeter 3v 3point5 digit , 11 kv discharge rod 1m pvc handgrip along with all the accessories bidder msut submit relevant test report along with the supply , digital tongue tester 0 100a 0 600v hand held battery operated safety rating cat iii 600 v of iec 61010 2 d31 , wire cutting plier 8 inch conforming to is 5087 and is 2615 , combination plier 8 inch insulation voltage 1000v as per iec 60900 , grease gun hand operated capacity 10 kg , grease gun hand operated capacity 20 kg , grease gun hand operated capacity 5 kg , double end wrench bsw thread 6mm x 32mm as per is 2028 and is 6131 , ring spanner wrench set 6mm to 32mm as per is 2029 , box end ring spanner wrench 6mm to 32mm as per is 2029 , wrench set allen key set 2mm to 32mm , socket wrench set 6mm to 32mm drive size 0point5 inch with extensions , double end wrench 24mm x 26mm as per is 2028 and is 6131 , double end offset ring spanner 24mm x 26mm as per is 2029 , socket wrench 36mm 1 inch square drive , combination plier 10 inch insulation voltage 1000v as per iec 60900 , combination plier 8 inch as per is 6149 , nose plier 8 inch as per is 3552 , circlip plier internal straight nose 8 inch as per is 7989 , screwdriver flat 200mm as per is 844 , screwdriver flat 250mm as per is 844 , screwdriver flat 300mm as per is 844 , adjustable slide wrench 250mm length as per is 6149 and is 6131 , adjustable spanner 250mm length as per is 6149 and is 6131 , adjustable spanner 300mm length as per is 6149 and is 6131 , hand hacksaw frame length 300mm , bench vice jaw nominal width 200mm material cast iron as per is 2586 , barrel pump rotary type pipe length 4m capacity 200 ltr , line tester up to 415v , double end wrench 32mm x 36mm as per is 2028 and is 6131 , pipe wrench 24 inch length conforming to is 4003 part 1 , angle grinder 900w 220v //bid details 2 / 84 disc dia 100mm , coiled wire hot air gun 230v air flow 150 to 500 lpm 2000w , drill bit set high speed steel 116inch to 12inch , drill high speed steel twisted 19mm , megger insulation tester hand operated metal body 5000v tets voltage 0 to 200 gigaohm relevant test reports must be submitted at the time of supply , megger insulation tester hand operated 500v test voltage 0 to 1000 mega ohm relevant test reports must be submitted at the time of supply , megger insulation tester

Central Government/Public Sector

CTN :43306328

13 Jan, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of sitc of air conditioner : : -supply installation testing and commissioning of 2tr 24000 btu per hour minimum bee 3 star rated confirming to is 1391 part 2 2018 inverter type cassette split ceiling mount air conditioner having wireless remote controller led display for indoor unit motorized vertical horizontal swing controls air filters auto restart with memory features inbuilt drain pump rotary scroll hermetically sealed compressor and initial charge of eco friendly refrigerant condensor and evaporator coils of copper material suitable for operation on 230v 10 single phase 50hz ac power supply. the indoor unit shall be suspended from the ceiling using threaded rods- including clamps bolts nuts etc and the outdoor unit shall be mounted on floor complete as required. , supply installation testing and commissioning of 2tr 24000 btu per hour and iseer value five star rated and compliance with is 1391 part 2 2018 wall mounted inverter type hi wall split cooling inverter air conditioner having wireless remote controller with led display hermetically sealedscrollrotary compressor and eco friendly refrigerantinitial charge of refrigerantcondensor and evaporator coils of copper material air filter with auto swing auto restart features suitable for operation on 230v single phase 50hz ac power supply. the indoor unit shall be fixed rigidly on wall using necessary frame the outdoor unit shall be mounted on floorlaying and interconnection of standard-length copper refrigerant piping as supplied by the oem between indoor and outdoor units complete in all respects as required. necessary drilling of hole and finishing the same to match for the surrounding as required. , supply and laying of soft drawn copper refrigerant pipe of suitable size for 2tr air conditioners for interconnection of suction and liquid lines between indoor and outdoor unit with tubular thermal foam insulation including necessary brazing jointing etc as required for cassette split air conditioner as required for item no. 1 2 , supply laying of 4c x 2.5 sqmm frls pvc insulated 1.1 kv grade pvc sheathed multistrand flexible copper cable confirming to is 7098 pt 1 1988 along with the refrigerant lines for connecting indoor and outdoor units , supply and fixing of 25 mm dia minimum thickness of 1.2mm pvc drain pipe along with accessories and necessary clamps with an u trap at the end as required. , supply and fixing of 75mm dia minimum 1.8mm thickness pvc covering pipe using necessary bend collor clamps threded rod supports accessories etc for laying copper refrigernt line electrical cable and drain line as required. , supply and installation of floor mounted powder coated ms 25x25x5mm l angle frame including clamps bolts nuts vibrating dampers as required for mounting of outdoor unit. , drilling of hole using core cutting machine of size up to 100 mm dia in concrete stone wall ceiling for laying refrigerant lines etc and finishing the same with cement mortar to match for the surrounding as required after laying , dismantling shifting of old 2tr cassette split air conditioner having indoor and outdoor units associated refrigerant pipes electrical wires and drain pipes including pump down of refrigerant. , making of necessary alteration of existing gypsum false ceiling for installation of cassette air conditioner indoor units including necessary aluminium channel support gypsum board necessary accessories including painting to match for the existing false ceiling.

State Government

CTN :43263787

14 Jan, 2026 18.2 Thousand

Halisahar - West Bengal

Tender For development work (9mtr tubular pole). under apas within halisahar municipality area. ward no. 02. part no. 02.

State Government

CTN :43137045

10 Jan, 2026 2.18 Lacs

Sainthia - West Bengal

Tender For supplying and erection of 8 nos 7 mtr steel tubular pole with led luminaries for road lighting at airtel tower to new road in ward no-05, part no- 99 unde sainthia municipality under apas

Angle Iron Truss Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors