Latest angle moulding Tenders | Government angle moulding Tenders

Central Government / Public Sector

CTN :40931786

09 Jul, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of angle moulding 2.5 x 85 x 1479mm to icf drg.no.lscn/eog-4-4-004, item no.7 [ warranty perio d: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40875606

07 Jul, 2025 16.99 Lacs

Delhi - Delhi

Tender For for procurement of building materials for undertaking the work of conservation of shish gumbad at losdhi garden complex new delhi - conservation work, unslaked lime (rajgarh/katni) in proper packing, coarse sand in good quality free from dust & foreign meterials, surkhi of 1st class bricks free from dust and foreign materials, belgiri (well dried), gur/ sheera, gum (babool), safedi (daliya lime), stone dust/chips 1st quality (free from clay organic matter etc.), batasha, rope sisal/jute (25mm dia), wooden planks of size 3.0 x 0.25 x 0.05m, bamboo solid (hight upto 10), ss clamps ( standared size or as per requirement of site incharge), round off chemical for up rooting the tree from structure, cr stone (size as per site requirement), red sand stone (as per site requirement), brick aggregate (40mm nominal size (must be free from clay/silt/organic matters etc. and well graded), common burnt clay fps (non modular) bricks class designation 7.5 (1st class), stone aggregate (single size) 20mm nominal size (free from any organic matter clay impurities), stone aggregate (single size) 10mm nominal size (free from any organic matter clay impurities), portland cement (opc-43 grade) isi marked (50 kg), fine sand (zone iv)free from impurities, prime having voc content less than 50 grams/litre, synthetic enamel paint (colour as per site requirement), base plates 150x150x5mm for 50mm dia long pipe, swival coupleer for 50mm dia pipe, right angle coupler (as per required size & design), steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (2 nos. of gate) (as per required size & design), disposal of moorum / malba/rubbish similar unserviceable, or waste material by mechanical transportation including loading, transporting unloading to approved dumping ground lead up to 10 to 15 km approx. 9capcity 8 cum/trip), provind and fixing double scaffolding system (cup lock type) on the exterior side up to seven story height made with 40mm dia m.s. tube 1.5m centre to centre horizonal & vertical tubes m.s tube cahllies m.s. amps and m.s. staircase system in the scaffolding for working platform etc.and maintaining it in a serviceable condition for the required duration as approved and removing it there after. the scaffolding system shall be stiffened with bracings runners connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of engineer-in-charge the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irresopective of duration of scaffolding., hydraulic excavator with driver and fuel, hire & running charges of loader, hire & running charges of concretye mixer with hooper, hire and running charges of vibrator, pvc mug (standard size & quality), pvc bucket (standard size & quality), cane basket (standard size & quality), pvc pan (tasla) (standard size & quality), polythene sheet (standard size & quality), pvc gum boot (pair) (standard size & quality), first aid box with medicine, diesel for machine, loading rickshaw with wooden body & motor cycle wheel, repairing of mixture machine as per site requirement, pvc pipe 1" dia, submersible pump 1.5 hp (isi mark), agro shed green net cloth 3 m wide, safety belt isi marked, water tank pvc 500 ltr isi marked triple layer, water tanker 2000 ltr for supply on hiring basis, safety helmet isi marked, provision for photo documentation & drawings of the conservatgion work

CTN :40867748

22 Jul, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of angle moulding l=2100mm, as per drawing: cc43502. packing instructions pi140 ver sion-01 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40849870

22 Jul, 2025 NA

Bhavnagar - Gujarat

Tender For supply of pvc angle moulding as per cwm/ pl drg. no. c/ cf-488/c, alt- nil. item no. - 10; size 75x75x2x2000 mm. as per is: 6307- 2023 type -1. [ w arranty period: 30 months after the date of delivery ]

CTN :40842525

10 Jul, 2025 NA

Ajmer - Rajasthan

Tender For supply of structural steel - scaffolding pipe ms is 1239 black 40mmx , electroforged galvanized grating type i , chain link fencing f anode g.bed , al zn colour coated roofing sheet 24ft , angle eq cs is 2062 50x50x6mm , channel cs is 2062 a 100x50mm

CTN :40866665

11 Jul, 2025 NA

Gorakhpur - Uttar Pradesh

Tender For supply of p.v. expansion (angle) moulding size - 70 x 26 x 3 x 2000 mm long to n.e.rly. drg. no. sk - 1457/c alt. 2, fig. 2 item 2, colour - as per drg. note:- material testing should be as per rdso sp ecn. no. rdso/2015/cg-02 (rev. 1) with amndt. 1 of nov 17. [ warranty period: 30 months after th e date of delivery ]

Central Government/Public Sector

CTN :40851130

17 Jul, 2025 NA

Multi City - Multi State

Tender For supply of extruded unequal angle moulding with 2000 mm length.drawing no.:- cc-43355, alt. (a)

Central Government/Public Sector

CTN :40810161

28 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of frp equal angle moulding for mrvc coaches to mtn drg. no. misc-sk-5286, a lt-1. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ]

CTN :40792627

11 Jul, 2025 NA

Pithoragarh - Uttarakhand

Tender For construction material and structural material of a at shelter c c - 2400 mm , sunshades of size 1500mm x 500mm shall be provided for outside windows oblique doors , eaves board as per requirement will be provided in each shelter as shown in drawing , foundation bolt 25mm dia and 600mm long welded with bottom anchor plate of size 250mm x 250mm x 10mm and fixed with bottom base plate of column using nuts and bolts , anchor fastner as ms tubular hooks of dia 100 mm and thickness 16mm , nut bolt of size 12mm dia 75mm long with washer , nut bolt of size 12mm dia 125mm long with washer , nut bolt of size 12mm dia 150mm long with washer , rivet full size , self tapping screw 100 mm long , self tapping screw 75 mm long , star screw 15mm long , star screw 25 mm long , star screw 75mm long , auto rechargable led tube light complete set 20w 4feet long with electronic choke , auto rechargable led bulb 15w , angle holder , modular switch piano and flush type 5 amp , bulk head fittings with 8w short body cfl , pvc switch board 8 x 10 inch isi mark , pvc switch board 6 x 4 inch isi mark , pvc casing and capping of size 25 mm , pvc casing capping tee bend , pvc casing capping l bend , wire single core copper conductor 1 point 5 sqmm , wire two core copper conductor 6 sqmm , mcb 10 to 32 amp sp , pvc square box 4 x 4 inch , insulation tape one and half x 25 mtr with isi mark , ceiling rose , change over switch 32 amp , star screw full thread 20 mm each pkt 320 , gi wire 14 swg , earthing of building will be provided using 4mm dia gi set earth wire connecting to main board to gi earth plate of size 60cmx60cmx6mm thick , lightening conductor made of copper tube 1500mm long x 25mm dia with five copper prongs of length 150mm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , provision of fire extinguisher 6 kgs abc dry powder stored pressure type , locking arrangements with 16mm iron tubular rings of dia 100mm to be provided and fixed in floor , cgi sheet 3000x900mmx0 point 60mm of isi mark , gi pipe 2400mm long and 50 mm dia and 1 point 5mm thick , pvc pipe 110 mm dia , pvc tee 110mm dia , pvc elbow 110 mm dia of isi mark , pvc socket 110 mm dia , pvc bend 110mm dia , riveting machine with 100 rivets as per isi specification , pan motor tasala 18 inch dia , showel with wooden handle , axes picks 03 kg head with handle , wire mess for seving sand 8 x 5 feet , trowels as per isi mark , brick hammer 500 gm with handle , water level pipe for mason 100 mtr long , sprit level , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , safety helmet , gum boot , hand gloves rubber , drilling machine portable , steel oblique wood cutter circular saw , cutting blade 4 inch steel , cutting blade 14 inch steel , hexa blade 350 mm long isi 1st quality , welding rod , welding goggles , welding gloves

Central Government/Public Sector

CTN :40698990

07 Jul, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply of pvc angle moulding as per cwm/pl drg. no.c/cf-488/c,alt-nil.item no.-9;size-38x38x2 x2000mm. as per is:6307-1985,(reaffirmed-2003)type-1. [ warranty period: 30 months after the da te of delivery ]

Angle Moulding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector