Tender For annual maintanance of water supply materials to water supply section in cmc hosakote limits - dia pvc tee 50mm, supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (c class) as per is 1239 (part-i) 1990 with latest amendments with isi mark (one end fitted with heavy duty collar and other end fitted with protective cover) 50 mm.dia, supply and delivery at site brand new best make pvc insulated cable of flat 3 core (sheathed) of nominal cross sectional area as per is 694-1990 with isi mark and as per its latest amendments.1x3x6 sqm., providing,supplying to work site, submersible pump set of 150mm dia suitable for bore well and confirming to is 803420003phase ss bowl & impeller with low volt motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. for 20.00 hp - 135 lpm 350 m 25 stg outlet dia 2.00, di elbow.6 inch, ms flange.4 inch, ms flange.3 inch, ms flunge.2 inch, sewage hose pipe.3/4 inch, gi pipe.3/4, solvent cement for ws, non return valve heavy duty.2 inch gm, gland packing batti.10 mm, pvc elbow.8inch, hemp rope., g.i pipe c class 33kg 2 inch, outdoor panel board box 5x3x1 feet french door lock double door lock system.18 gauge, g.i tap.3/4 inch, pipe wrench.24 inch, chiniki., lock.60mm, lead., providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, for sluice valve of pn -10.0 and 200mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100% leak proof with face to face dimensions as per is 14846-2000 with the latest for sluice valve of for sluice valve of pn -10.0 and 150mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100% leak proof with face to face dimensions as per is 14846-2000 with the latest amendments only. the stem sealing should complete for sluice valve of for sluice valve of pn 10.0 and 100mm, chain rinch.24 inch, end cap.8 inch, gm gate valve isi make.2 inch, c.i.pipe.6 inch, pikaxe ., axa blade., bolts and nuts.1/2 inch, bolts and nuts.3 inch, bolts and nuts.4 inch, bolts and nuts for valves., crow bar., grease. for ws, gi pipe.1 1/4 inch, g.i clamp set.2 inch, g.i plunge set.2 inch, g.i bore cap.2 inch, g.i pipe b class 29 kg.2 inch, pvc tail pieces.6 inch, pvc tail pieces.4 inch, pvc tail pieces.3 inch, pvc tail pieces.2 inch, pvc reducer.4 inch x 2.5 inch, pvc reducer,4 inch x 6 inch, pvc reducer. 3 inch x 2.5 inch, pvc reducer.3 inch x 6 inch, pvc reducer. 3 inch x 4 inch, pvc reducer.2 inch x 2.5 inch, pvc reducer.2 inch x 3 inch, pvc reducer 160 mm dia., pvc reducer 140 mm dia, pvc reducer 110 mm dia., pvc reducer 90 mm dia., pvc reducer 50 mm dia, supply and delivery at site special moulded variety pvc reducer as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark with its latest amendments, pvc saddle. 6 inch x 1/2 inch, pvc end cap. 6 inch, pvc collar.6 inch, pvc saddle.4 inch x1/2 inch, pvc end cap. 4 inch, pvc saddle.3 inchx1/2 inch, pvc end cap 3 inch., pvc saddle. 2.5 inch x1/2 inch, pvc end cap.2.5 inch, pvc saddle. 2 inch x 1/2 inch, pvc end cap. 2 inch, pvc m.t.a. 2 inch, pvc f.t.a 2 inch, xlpe 1.1 kv, or heat resistant pvc insulated, pvc exutruted inner seath armoured ltug cable25 sqmm, 4 core,, pvc reducer 75 mm dia., pvc reducer 63 mm dia., xlpe 1.1 kv, or heat resistant pvc insulated, pvc extruded inner seath a
Tender For ipco make rotoformer spares for sru block - list of item(s) / work(s) as per tender documents, bottom support roller,p/n-g-bt-010026, tension bearing for drum p/n g-la-007835, stator complete,p/n-g-bt-009253, lower part(bore dia-3.5),p/n-g-bt-006121, adjusting device,p/n-g-bt-002983, refeed bar body,p/n-g-bt-009417, sealing,p/n-g-di-002467, slide bar longit w/o c/o,p/n-g-bt-008583, slide bar long w c/o rt,p/n-g-bt-008445, slide bar long w c/o lft,p/n-g-bt-008444, slide bar short,p/n-g-bt-007805, slider bar transversal,p/n-g-bt-005294, plough bar long,p/n-g-bt-005564, plough bar short,p/n-g-bt-005282, sealing profile top,p/n-g-di-006802, sealing profile bottem,p/n-g-di-006800, curtain l=10m p/n:027671, cleaning set,p/n-g-we-004140, protective blade,p/n-g-bt-004325, pully cleaner blade,p/n-g-bt-006748, scraper blade,p/n-g-bt-004169, brush,p/n-g-bt-008202, eccentric nozzle p/n g-bt-019436, mounting clip,g-bt-019435
Tender For checking and repairing work of dipole-02 nos, branch cable-02 nos, power divider of fm antenna and 1-5/8" coaxial cable, repairing work of defective solar aviation light and refitting after proper cleaning & sealing, installed on 30 meter guy mast, cleaning and greasing work of guy anchors of30 meter guy mast including wrapping with gunny cloth and pvc sheet - 9 nos,painting of30 meter guy mast with synthetic enamel paint of approved brand and shade as per air specification after scrapping and cleaning the old surface, checking and repairing work of dipole-01 no & 7/8" coaxial cable for loose connection, trapped moisture etc. installed on the rooftop of the studio cum office building., cleaning and greasing work of guy anchors of 120 meter guy mast of 100kw, mw transmitter, zubza including wrapping with gunny cloth and pvc sheet - 16 nos.
Tender For work of fire retardant chemical coating for cable fire protection and fire barrier board sealing at various mccs of chp/ahp of 1x800mw unit no. 8 at wtps
Tender For corrigendum : tn-5428 work of leakages to be attended without any shutdown of the units by on-line sealing technique in turbine and boiler area unit 1to7 of kstps, kota.
Tender For supply of wall paneling items c c - primer for water proofing treatment conforming to is 3386 1986 , non skid water proofing silica panels 400x400mm x 7-8mm , water proof floor silica panels 300x300mm x 7- 8mm thick , water proof floor silica panels 400x400mm x 7- 8mm thick , water proof floor silica panels 600x600mm x 10mm thick , acrylic sheet 4 feet x 3 feet x 3mm , acrylic sheet 6 feet x 4 feet x 4mm , wooden wall panelling of size 4 to 6 mm thick and scantling of size 11 by 2 inch x 2 inch for frame work including supply of sufficient qty of nails , sealing compound grade a , glass putty