Latest anodizing Tenders | Government anodizing Tenders

CTN :41220380

16 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For mfg& supply of input blank as per drg no tend 2661 for msl housing launcher (before hard anodizing s

Corporations And Associations And Others

CTN :41255186

07 Aug, 2025 6.45 Lacs

Delhi - Delhi

Tender For providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone - providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone, supply and fixing of double arch swing.leg support :80 mm nb pipe. seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 6.0 m x 1.5 m. height : 2.6 m. top bar :50 mm nb pipe. suspension: 6 mm rubber coated chain. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat/ u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chair. the bail bearings shall be mounted inside a specially designed nylon clamp. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer

CTN :39356635

31 Jul, 2025 NA

Pune - Maharashtra

Tender For bid to ras tender for supply of pacing wire bipolar , saphenous vein cannulae comma sterile , silastic tape 2mm width yellow , skin marker with measuring scale , vaccum drain asssorted sizes dash 10 comma 12 comma14 comma 16 comma 18 , epicardial fat retractor coronary artery retraction clip , gamma sterile gel for ultrasonic and electrical transmission skin contact 20 gm sachet , sterile transparent semi permiable comma thin polyurathane film latex free with water repellent hypo allergic acrylate , stapler remover disposable , antimicrobial incise drape 60 x 45 cm , antimicrobial incise drape 60 x 60cm , drape contains a complex of iodoform n dash vinyl 2 pyrrolidine with a iodine concentration of 0 point 092 mg iodine oblique cm2 , drape contains a complex of iodoform n dash vinyl 2 pyrrolidine with a iodine concentration of 0 point 092 mg iodine oblique cm2 , pur arterial catheter 20g 5cm with integral extension comma guide wire comma introducer needle , arterial cannula 20 g oblique 1 point 10mm x 45mm 49ml oblique min , alcohol wipes alcohol 42g comma 0 point 05g didedeylimethyl ammonium chloride containing rapid disinfection wipes 20x22cm comma flow pack of 100 wipes comma passes en 14476 and en 16615 , cleanisept wipes maxi 100 percentage pet premoistened towellets in dispenser containing disinfecting wipes containing alkyl dimethyl benzyl , ot table kit dash super absorbent table sheet non slippery impervious 102x230cm draw sheet 102x152 cm max weight capacity 200 kg armboard cover with straps impervious headboard cover impervious , specimen despatch container 100ml , specimen despatch container 500ml , specimen despatch container 2000 ml , glucostrips compatible with one touch machine bott of 50 strips , knee oblique arm rest gel pad 100 percentage silicon based comma encased with thermoplastic polyurethane film comma with antimicrobial coating , universal gel pillows , dia mm160x80x40mm 100 percentage silicon based comma encased with thermoplastic polyurethane film comma with antimicrobial coating , disposable infant defibrillator paddles oblique electrodes compatible with sholl defibrillator cum monitor , disposable adult defibrillator paddles oblique electrodes 8 dash 13cm compatible with sholl monitor , endotracheal tube 3 point 5 with microcuff , endotracheal tube 4 point 0 with microcuff , endotracheal tube 4 point 5 with microcuff , endotracheal tube 5 point 0 with microcuff , endotracheal tube 5 pont 5 with microcuff

Central Government / Public Sector

CTN :40936959

07 Aug, 2025 NA

Mysore - Karnataka

Tender For corrigendum : supply of manually operated anodizing system

CTN :41177763

30 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supplying items for the new integrated high court complex at bandra government colony, cts no. 629/1234/a, bandra (east), mumbai. - all concrete should be admixed with integral hydrophilic crystalline admixture (16bars) reputed makes like bulwark. taskmek, grace or equivalent for reducin permeability by more than 85% when tested as per din 1048 part 5 (after applying cycles of hydrostatic pressure), for self-healing of cracks up to a width of 0.40 mm, for reduced sulphate attack and for high early strength of concrete etc. this should meet the requirements specified in the recommended dosage rate of 1% complete as per manufacturers specifications to the entire satisfaction of engineer-in-charge. hydrophilic crystalline admixture shall also have a corrosion inhibitant property and shall be compatible with any other water reducing concrete chemical admixtures added to concrete for workability purpose. crystalline formation shall be mix of cylindrical & circular in shape to have maximum filling of pores the admixture used shall have manufacturers test reports and approval mandatorily both from iits and irc (indian road congress). approved makes: pidilite/ technonicol/ myk/ mapei, providing & applying 2 components, solvent free, liquid applied elastomeric seamless hybrid polyurea polyurethane membrane, using high pressure plural component spray equipment, to form a minimum system thickness of 1.5 mm in two or more passes with a total consumption of 1.5-1.6 kg / m2. the membrane shall have 100% solids, voc free, tensile strength > 15 mpa as per astm d 412, elongation > 450% as per astm d 412, low temperature crack bridging ability of 3.2mm as per astm c 1305, shore a hardness > 85 astm d 2240, puncture resistance > 1000 n as per astm e 154, water head resistance > 7 bar as per astm d 5385.the coating should pass dynamic crack bridging as per en 1062-7, method b for 20,000 cycles at -20 degree temperature. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. apply primer coat of epoxy primer by roller/ airless spray guideline and coverage @ 5-6 m2/ltr depends on porosity of concrete. allow to cure for max 5-6 hours. broadcast anti slip grains of 200-300 micron (dried sand) on wet primer at coverage of 0.8-1 kg/m2 and allow to come to touch dry condition before application of membrane. approved makes: pidilite/ technonicol/ myk/ mapei, supplying and installing 1.5 mm composite thick fully bonded weldable hdpe membrane conforming to is 16471:2017 requirements of ug waterproofing structures, requirements to provide type a fully bonded protection of ug waterproofing structures. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. the membrane should be minimum 2.4 m wide comprising of an hdpe layer and a pressure sensitive adhesive layer which is covered by a weatherproof protective layer with lap joint strength at overlaps >15000 n/m astm d 6392:2012. the membrane shall have minimum of 100 mm side and end laps which shall be thermos fused with leister machines at all the joints for assuring watertightness and achieving monolithic membrane. end laps and side laps should be a minimum of 100 mm with double weld system, comprising of two parallel welds of 15 mm wide each with a 20 mm air channel gap in between the two weld lines. the size of the membrane should not be less than 2.4 mtr. x 20 mtr. to minimize the joints. this membrane shall be continued over the vertical surface but terminated minimum 100mm below the top edge of the raft slab/footings and fixed as per recommendation. the hdpe membrane should have the below mentioned technical properties- 1) lap joint(side and end lap) strength at overlaps 15000 n/m astm d 1876 2) resist hydrostatic pressure of 70 m head of water as per astm d5385 3) puncture resistance of 1000 n as per astm e1544) peel adhesion to concrete of 150

Central Government And Public Sector

CTN :41146724

11 Aug, 2025 NA

Surat - Gujarat

Tender For supply of two component self priming surface epoxy primer gray shade as per attached technical specifications , two component high solids acrylic aliphatic polyurethane finish coating color shade as per is-5- eau-de-nil 216 as per attached technical specifications , two component high solids acrylic aliphatic polyurethane finish of color shade as per is-5-french blue shade 166 as per attached technical specifications , two component high solids acrylic aliphatic polyurethane finish of color shade as per is-5-a.c.grey shade 693 asper attached technical specifications , epoxy thinner compatible for surface tolerant epoxy primer coating , pu thinner compatible for acrylic aliphatic polyurethane finish coating , two component, high build, high solids heavy duty coal tar epoxy coating with good abrasion and corrosion resistance for internal lining of sea water pipes as per attached technical specifications , epoxy thinner compatible to heavy duty coal tar epoxy coating , water based rust converter of marine grade as per following technical specifications

CTN :40870475

28 Jul, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : tender for supply of 44 by type hazmats chemicals d d - compound jointing , sealing compound , compound , sealing , isopropyl alcohol (ar) , corrosion preventive compound , leak test compound , lubricant , solid film , sealing compound (torque stripe) , yellow , paint , polyurethane , coating , epoxy primer , primer(ar) , dry cleaning solvent , alcohol , denatured , ethyl , epoxy , primer coating , yellow type 1 , self leveling green , sealing compound low adhesive (ar) , adhesive , silicone , thread lockers loctite , thread lockers loctite , thread lockers loctite , primerless firewall sealant (ar) , k&n filter cleaner , corrosion inhibitor (liquid) (ar) , compound sealing , high solids polyurethane coating , corrosion preventive compound(ar) , corrosion inhibitor , acetone , adhesive , adhesive , adhesion promoter , isopropyl alcohol technical , chemical conversion coating (ar) , chemical conversion (ar) , compound , aircraft cleaning , compound anti seize , anti seize compound , anti seize compound , compound , corrosion preventive , corrosion preventive (ar) , compound , corrosion preventive , sealing retaining compound , epoxy resin (ar) , general purpose liquid detergent

CTN :40939734

29 Jul, 2025 NA

Allahabad - Uttar Pradesh

Tender For corrigendum : supply of deicer repair patch kit , deicer repair kit , resurfacing kit , polyurethane filler , grease z 21 214 , grease z 21 220 , anticorrosion grease paste molykote dx , grease aeroshell grease 17 nyco grease gn 17 aeroshell greas 64 , general purpose grease , grease mil g27617 , lubricating oil tectyl 900 brayco 300 royco 308 ca , sealing compound pr1422a2 , release agent z 24223 , gn47 thread compound , solid film lubricant , epoxy primer , polyurethane coating international black , dry film lubricant aeroshell turbine oil 308 eastman turbo oil 2389 turbonyco , corrosion inhibiting compound z11502 , pr1782c2 interface sealant , solvent cleaning compound z23149 , silicon sealant rtv889910 , anti corrosive compound z11906 , solvent dissolvent ams 3160 , anaerobic adhesive loctite 222 , anaerobic adhesive loctite 241 loctite 242 loctite 243 , anaerobic adhesive loctite 270 loctite 271 , anaerobic adhesive loctite 290 , anaerobic adhesive loctite 932 , gas and air leak detector , pr 1782a1 by 2 fuel tank sealant , pr1782b2 fuel tank sealant , integral fuel tank sealant pr1750b1 by 2 pr1750b2 pr1750b4 , lubricating oil brayco 460 turbonycoil 3516 , low adhesion sealant , silicon sealant white , silicon jointing compound , lock wire , anti corrosive compound z11909 , dry film lubricant molykote 3400 a , elastomeric adhesive , polyurethane sealant ) /bid number : gem/2025/b/6223529 * /dated: 03-07-2025 & & / bid document 1 / 40

CTN :40629204

12 Aug, 2025 NA

Delhi - Delhi

Tender For procurement of spares for rafale aircraft - washer, pin,straight,headless, nut,plain,hexagon, pin,straight,headless, plate,mounting, screw,cap,socket head, identification plate, foam, mirror protection, sealing compound, screw,machine, bolt,machine, screw,machine, bolt,machine, screw,machine, bolt,machine, screw,machine, screw, screw,machine, screw,machine, screw,machine, screw,machine, screw,machine, screw,machine, screw,machine, activator,paint products, rubber band, rubber band, polyurethane coating, pre-formed packing, pre-formed packing, pre-formed packing, thinner,paint products, grease,ball and roller bearing, nut,self-locking,cap, activator,paint products, adhesive, primer,adhesive, spring,helical,extension, spring helical,compression, tab, tab, gasket, plug,machine thread, plug,machine thread, spring,helical,compression, gasket, stud,plain, stud,plain, ring,externally threaded, spring,helical,compression, plunger,detent, gasket, stud,plain, spring,helical,torsion, spacer,ring, spacer,ring, pin,straight,headless, plunger,detent, plunger,detent, strap,webbing, survival pack cushion, seat bridle box, plunger,detent, spring,helical,compression, washer,flat, stud,equipped, spacer,stepped, axle,shouldered, shim, automatic deployment unit spring, screw,shoulder, spring,helical,compression, retainer,helical compression spring, plug,machine thread, plunger,detent, stud,plain, spring,helical,compression, pin,straight,headed, screw,machine, screw,machine, screw, screw,machine, screw,machine, nut, nut,self-locking,extended washer,he, nut,self-locking,extended washer,he, bolt,machine, nut,self-locking,cap, lock insert, pre-formed packing, pre-formed packing, screw,assy, washer,lock, epoxy primer coating kit, o ring, thread, thread, tape,insulation,electrical, washer, pin,straight,headed, pin,cotter

Anodizing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government / Public Sector

Central Government And Public Sector