Latest answer book scrap Tenders | Government answer book scrap Tenders

corporations/Associations/Others

CTN :36108280

22 May, 2024 11.97 Lacs

Cuddalore - Tamil Nadu

Tender For corrigendum : providing of repair and overhauling service - as per scope of work; asper scope of work; no; buyer premises - 1) rmthblr5738 sealing pulverized fuel leaks in mill housing/mill door/intermediate part of mill (0 ml to below classifier level)- 1. identifying the leaks when the mill is in service. water washing the area after stoppage of the mill. moving the gas cutting set, welding machine, welding cables to the location. moving necessary wooden planks, scaffolding pipes etc to the location and providing necessary platform for carrying out the work. 2. assessing the extent of damage/thinning/erosion of the plates in the neighborhood. finding out the size of the patch plate required in the eroded area. the minimum size of the patch plate shall be 300 x 300 mm (depending upon the location of puncture). marking and cutting patch plate of required size from 16/20 mm plate at fabrication yard. making the edge preparation by cutting and grinding. providing necessary lifting hooks by welding. removing the already welded clit pieces if any in the leaking area. 3. transporting the pre fabricated plate to required location. lifting by using rope/chain pulleys/ pull lifts, setting and full welding to arrest any possible leakage of pulverized fuel. 4. providing necessary packing ropes in inspection doors, mill door joints and ld2 sleeve area and tightening the bolts. prepare the hard setting compound by mixing the hard-setting powder with sodium silicate solution and applying the same in the above mentioned areas and any other fuel puffing areas and giving necessary curing time. 5. clearing the scrap/debris after the work. removing the scaffoldings after trial run and completion of any pending defects and leakages found during trial run. 2) rmthblr5739 sealing pulverized fuel leaks in classifier (including by pass plates)/below 15 ml (above classifier level to 15 ml). 1. identifying the leaks when the mill is in service. water washing the area after stoppage of the mill. moving the gas cutting set, welding machine, welding cables to the location. moving necessary wooden planks, scaffolding pipes etc to the location and providing necessary platform for carrying out the work. 2. assessing the extent of damage/thinning/erosion of the plates in the neighborhood. finding out the size of the patch plate required in the eroded area. the minimum size of the patch plate shall be 300 x 300 mm (depending upon the location of puncture). marking and cutting patch plate of required size from 16/20 mm plate at fabrication yard. making the edge preparation by cutting and grinding. providing necessary lifting hooks by welding. removing the already welded clit pieces if any in the leaking area. 3. transporting the pre fabricated plate to required location. lifting by using rope/chain pulleys/ pull lifts, setting and full welding to arrest any possible leakage of pulverized fuel. 4. prepare the hard setting compound by mixing the hard-setting powder with sodium silicate solution and applying the same in the above mentioned areas and any other fuel puffing areas and giving necessary curing time. 5. clearing the scrap/debris after the work. removing the scaffoldings after trial run and completion of any pending defects and leakages found during trial run. 3) rmthblr5740 sealing pulverized fuel leaks in main p.f duct above 15 ml upto 27 ml including 1st,2nd,3rd & 4th limb of pf duct. 1. identifying the leaks when the mill is in service. water washing the pf duct area after stoppage of the mill. moving the gas cutting set, welding machine, welding cables to the location. moving necessary wooden planks, scaffolding pipes etc to the location and providing necessary platform for carrying out the work. 2. assessing the extent of damage/thinning/erosion of the plates in the neighborhood. finding out the size of the patch plate required in the eroded area. the minimum size of the patch plate shall be 300 x 300 mm (depending upon the location of punctur

corporations/Associations/Others

CTN :36111972

28 May, 2024 NA

Jhajjar - Haryana

Tender For corrigendum : auction sale of scrap fabricated stainless steel,misc ferrous not incl in struc/spares,scrap ferrous operation and maintenance idler,scrap hichrome grinding roll,scrap hi-crome bull ring segment xrp1003,scrap emitting electrode specialss,scrap ms pipe/erw pipe,misc aluminium scrap,cast iron scrap,rein for cement steel scrap,super enameld copper winding wire scrap,ms empty scrap drums cap 205/210/250 ltr,scrap empty ms paint drum 20ltr capacity,pvc empty drum/carboy-200 ltrs,empty jerican - plastic15 to 30 ltr,scrap empty paint can, cap 18 ltr,misc plastic jerican,scrap bearing,feeder belt scrap,cut picess conveyor belt scrap,ltht breakers/modules scrap,scrap ballasts/chokes,scrap wood packing wood miscellaneous wood,scrap filter bag for ahp

corporations/Associations/Others

CTN :36177272

29 May, 2024 NA

Guna - Madhya Pradesh

Tender For auction sale of mix ms scrap : iron scrap, lighting fitting etc,mix scrap rubber and plastic :,u/s panel rack and panel frame -7nos,u/s packing cartoon,u/s air intake filter (cylinderical)-864 nos,u/s ms drums 210l cap (closed mouth) - 70 nos,u/s wooden scrap,u/s scrap mix cable - 600 kg,u/s mix aluminium scrap,mix used/scrap stainless steel fire hose nozel -ss-540 kg,used/scrap telephone booth 2big and 1 small- 3 nos,e-waste scrap,battery (hazardous waste) : - 87 nos,old and used n2 dyer molecular sieves desiccant packed in 10 ms drum,old and used glass wool insulation

corporations/Associations/Others

CTN :36169791

21 May, 2024 NA

Bathinda - Punjab

Tender For auction sale of waste packing wood scrap,scrap pvc

corporations/Associations/Others

CTN :36137337

13 May, 2024 NA

Multi City - Multi State

Tender For auction sale of wooden scrap item,scrap of used packing material,scrap of glass and sanitary items,scrap of plastic, rubber and foam items,scrap of waste iron, tin and steel,aluminium scrap,aluminium shaving,scrap of copper metal,brass shaving,e-waste (electronics and electrical waste),used/old batteries (lead-acid)

corporations/Associations/Others

CTN :36137288

20 May, 2024 NA

Hoshangabad - Madhya Pradesh

Tender For auction sale of :used and scrap radiator of vehicle - small,u/s drill machine,u/s waste cotton cloths, czz002041, hsn 63090000,u/s cotton comber waste briquettes , sczz001813, hsn 52029900,u/s scrap paper core pipe ,sczz001909, hsn 47079000,u/s micro perforated plastic film type 60 micron- pcb category,u/s ventilation plant for ndh -old ac, hsn-84150000,u/s scrap empty bobbin spool big hk250,hsn-39159090, sczz001702,u/s scrap paper briquettes, hsn - 47061000,u/s mixed packing items as per list attached,u/s pulp recovered from filter drum item-i , hsn 47061000, sczz001121,u/s pulp recovered from filter bed item-ii , hsn 47061000, sczz001122

State Government

CTN :36125621

13 May, 2024 NA

Muzaffarpur - Bihar

Tender For quotation for sale of routine scrap material (other than capital items/equipment) -news papers (all types), magazines etc. ,shredding paper / mix of white all colors and of all thickness complete ,old books registers /files /folders and all stationeries etc. ,empty plain card board boxes of diff. sizes, shapes etc. (brown/ white colour) from small to big (corrigated boxes), miscellaneousllaneous broken glass scrap, broken ,bottles, sheet glass 4mm to 12mm in all sizes ,broken switches, electrical switch board, fan regulators, plug, sockets etc. ,fused bulbs (cfl, ordinary bulbs, tube lights of all types ,empty gunny bags (large and small) ,,wooden santlilng, stripes, pieces, logs, pattis, ply, teak wood etc. of various sizes, packing material (indian/ imported) of all types of miscellaneous items ,condemned cotton pillows with or without cover complete ,condemned cotton waste linen ragged white / green / blue/ toned / soiled / etc. (all colours) ,condemned terricot waste linen ragged white / green/ blue / toned / soild / etc. (all colours) ,condemned thick drill clothes / blankets (all colour) ,condemned cotton/foam/coir mattresses with or without cover complete, old cartridge / rollers etc. of all sizes and make ,wax blocks of all sizes, shapes complete ,tyres per kg ,all types of glass bottles and other glass scraps ,used oil (machine) ,old battery, broken cast iron pipes including collar, bend, bracket etc. ,g. i. a/c ducting including collar, bends, galvanized sheets etc. ,old m.s. / g. i. pipes (assorted length & sizes) including all fitting etc. ,broken aluminum wire pieces with pvc insulation in pieces and full length complete including broken switches ,miscellaneous aluminum scraps, hollow pipes, soil alum. (nonmagnetic, stripes, screws, false ceiling, runner, panels complete) ,aluminum a/c filters ,stainless steel (nonmagnetic) vessels, angles, bracket, utensil, drums, angles etc.,misc. copper scrapes, plates, stripes, sheets glass 4mm to 12mm in all sizes complete,miscellaneous bass scarps, plates, stripes, sheets, angles, pipes complete, broken hard plastic, broken black or white colour cans including ,clear plastic of 5 liters to 20 liters, empty plastic containers /can (5 liters) black & white ,miscellaneous plastic scrap, plates, stripes, sheets, pipes etc. ,empty plastic oil tins of 15ltrs ,empty plastic containers of all types

corporations/Associations/Others

CTN :36121636

15 May, 2024 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of alluminium scrap(gd-a-1-b-g),u/s wooden scrap -u/s packing boxes and broken wooden office furnitures etc,copper welding wire scrap/ copper scrap,brass fillings/swarf (t and b) mixed verieties,misc scrap,wheel grinding of sorts sizes/unserviceable,battery exide ironclad traction 80/30 volt/unserviceable/for anetion dos/psa,alloy steel scrap class lcm unserviceable and rejected components,plastic scrap,alloy steel scrap to classification hncm,u/s tungston carbide tips insert,hihg tensile brass to specn c6/2/69 kg,unserviceable it peripherals,brass wire 0.25mm dia for edp unserviceablet classified as brass scrap,ms (t and b) swarf with mud, dust and rust,steel scrap class b

corporations/Associations/Others

CTN :36092303

14 May, 2024 NA

Cuddalore - Tamil Nadu

Tender For providing of custom bid for services - custom bid for services - short term contract for relocation of high pressure drain valves from 0 ml elevation to 6 ml elevation in tps ii expn- 1.0 cutting and removing valves from the drain header at 0ml elevation. 2.0 the balance cut portion in the drain line where the valve was cut and removed to be welded with appropriate spool piece by ibr welder. 3.0 the drain lines coming from different locations to be re-routed to a common location at 6ml to make a valve station. 4.0 all valves removed from 0ml to be welded at the valve station at 6ml. 5.0 the gland packing of valves if required should be replaced by the contractor, the required gland packing will be provided by nlcil. 6.0 the vendor shall quote rates for re-locating each size of valve individually. 7.0 to facilitate a valve station at 6m drain lines would require re-routing. for re-routing nlcil will provide the required tubes. the bends required for re-routing should be fabricated by the vendor. the vendor may take the tubes for bending to his own facility for bending after submitting indemnity bond for value equal to that of the material. 8.0 for re-routing amount will be paid for per joint welded and per bend fabricated and used, nothing extra shall be paid. 9.0 for estimation it may be assumed that each line would require 10 joints (for replacing valves and re-routing line) and 3 bends. however payment will be made for only the executed quantities. 10.0 the path of re-routing will be decided by nlcil. 11.0 after the work is competed hydro-test will be conducted at design pressure ( for sh 203 ksc and for rh 52 ksc) and if any defects observed in work should be corrected by the vendor free of cost. 12.0 100% radiographic testing (except socket weld joints) should be carried out on all ibr joints (including repair/re-welds), the rate for welding should be inclusive of radiographic testing and nothing extra will be paid for radiographic testing. 13.0 the results of the radiographic testing will be checked by nlcil engineers and if any defects are found the re-welding should be carried out at free of cost. 14.0 all material required for work will be handed over to the vendor at nlcil stores only, the transportation of these material from stores to the work site is in the contractors scope. 15.0 removal of all scrap formed as a result of the work. 16.0 scope of the contractor regarding materials. 16.1 the following are in the scope of the contractor regarding the materials required to carry out the work. 16.2 all the tools and tackles required, namely winches, welding machines, cutting set, hoses, welding accessories, air hoses, pipe cutting machines ,grinding machines, 16.3 mother oven, normal oven, flask, slings, chain & pulley blocks, d-shackles, wire ropes, temporary supports, wooden planks, temporary platform grills, scaffolding pipe, clamps, fasteners & materials, blow torch, edge preparation machine, exhaust fans (for evacuation of welding fumes) and any other items required for the work 16.4 consumables such as gas cylinders (pure argon(99.999%), acetylene, lpg ,oxygen etc,),tungsten electrodes ,purging paper and others consumables (cotton waste, emery sheets, paint markers, thermo chalk, buffing wheels, die penetrant kits, kerosene, grinding wheels, cutting wheels, hacksaw blades ,etc.) required for the works. 16.5 personal protection equipment (ppes) such as safety shoes, nose mask, helmet, hand gloves, goggles, safety belts, ladders, crawling boards, safety net, full body safety belt, and any other material required to ensure the safety. 16.6 arrangement of electrical supply distribution for their electrical utilities along with necessary electrical distribution panels, cables, protection, safety relays, earthing etc. 16.7 arrangement for lighting at the work spot along with lighting equipment such as power cable, transformers, hand lamps 24 volt of sufficient quantity. 16.8 the contractor should furnish proper

Answer Book Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors