Latest anti blast film Tenders | Government anti blast film Tenders

corporations/Associations/Others

CTN :40848245

14 Jul, 2025 NA

Panvel - Maharashtra

Tender For corrigendum : regarding approving the rates of open gym materials for the year 2025-2026, 2026-2027 and 2027-2028 for 3 years as per requirement of panvel municipal corporation - forearm twirlproduct area : 1.5m x 0.8m (5ft x 2.6ft) safe play area : 2.5m x 1.8m (8.2ft x 5.9ft) ideal for : 13 years & above function: strengthens shoulders & forearms improves wrist agility.technical specification: post dia: 80nb gi main vertical support pipe of shoulder builder is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frameto hold the rest assemblies wheel structure: 25nb galvanized pipe bend to form ring of wheel and spokes are made up of 15nb g.i. pipes that connect to each other to form a wheel of shoulder twirl. nylon knobs are provided on the wheels for gripping purpose. this wheel is fixed to main support with the help of 40nb connector pipe with specially designed bearing housing. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with, abs board product area : 1.6m x 0.8m (5.2ft x 2.6ft) safe play area : 2.6m x 1.8m (5ft x 5.9ft) ideal for : 13 years & abovefunction: strengthens shoulders & forearms improves wrist agility.technical specification: main structure: the abs board shall be having ergonometric design with main support of 50nb pipe. galvanized round pipe having 50nb with pipe rectangular 50 x 25 x 3 mm to be welded to the main support frame. backrest: backrest sheet having 3mm thick to be made from frp materails pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. frp products: it is made up of fiber reinforced plastic(frp) process. it is made up of 3-4 mm thick fiber reinforced plastic. the frp material is tested for abrasion resistance & uts(ultimate tensile test) powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for adhesion test (according to astm-d-3359) with the help of cross hatch cutter instruments. nut and bolts: galvanized/ s.s./allen bolt/button head allen bolt & nuts / nylon lock nuts are used with pvc bolt caps.all open ends of pipe been closed by gi / pvc caps for user safety against entrapment., aerial stoller product area : 1m x 0.5m (5ft x 2.6ft) safe play area : 2m x 1.5m (6.6ft x 5ft) ideal for : 13 years & abovefunction: strengthens leg muscles. lower body workouttechnical specification: post dia: the aerial stroller having ergonomic design with 80nb gi main vertical support pipe of aerial stroller is fixed over 10mm thick base plate.\ clamping plates are attached to main frame to hold the rest of assemblies. footrest and handles: footrest bend and handle having 40nb and 25nb dia galvanized pipe respectively.the materials used for foorest are aluminum/nylon/lldpe/hdpe specially designed mounting flange assembly having circular flange of 130mm dia with 16mm thickness is provided for footrest assembly. pipes: all metal pipes are hot dipped galvanized pipes conforming to is 1239 (part 1) with gi thickness of 60micron. pipe materials or class: medium duty (b class) and heavy duty (c class) series of pipes only.wall thickness of pipe varies according to class/series of pipe used. powder coating:it shall be done with pure polyester raw material.dry film thickness maintained within the range of 50-70 microns.it is tested for

CTN :40447209

02 Jul, 2025 NA

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of finished suture and other products tender - oxd regenerated cellulose fibre 1_x2_ 12 foils , oxd regenerated cellulose fibre 2_x4_ 12 foils , oxd regenerated cellulose std 2x14 12 foils , oxd regenerated cellulose std 2_x14_ 12 foils , oxd regenerated cellulose std 4x8 12 foils overview , oxd regenerated cellulose std 2_x3_ 12 foils , oxd regenerated cellulose woven 1x1 12 foils , oxd regenerated cellulose woven 1 x 3.5 12 foils , oxd regenerated cellulose woven 3_x4_ 12 foils , merifeim 80 x 50 x 10 standard 2 foils , merifeim 80 x 50 x 10 no touch 2 foils , merifeim 80 x 30 tampon 6 foils , merifeim powder 4 no , merifeim 80 x 50 x 1 film 20 foils , merifeim 80 x 07mm endoscopic tampon 10 foils , polypropylene mesh _06cm x 11cm_ 6 foils , polypropylene mesh _7.6cm x 15cm_ 6foils , polypropylene mesh _10cm x 15cm_ 1foil , polypropylene mesh _12cm x 18cm_ 1foil , polypropylene mesh _15cm x 15cm_ 1foil , polypropylene mesh _15cm x 20cm_ 1foil , polypropylene mesh _15cm x 30cm_ 1foil , polypropylene mesh soft _06cm x 11cm_ 6 foils , polypropylene mesh soft _7.6cm x 15cm_ 6 foils , polypropylene mesh _30cm x 30cm_ 1 foils , polypropylene mesh soft _12cm x 18cm_ 1 foil , polypropylene mesh soft _15cm x 20cm_ 1 foil , polypropylene mesh _12cm x 15cm_ 1 foil , gtpolypropylene mesh _15cm x 15cm_ 1 foil , gtpolypropylene mesh _06cm x 11cm_ 6 foils , gtpolypropylene mesh _7.6cm x 15cm_ 6 foils , macroporus mesh _10cm x 15cm_ 1 foil , macroporus mesh _12cm x 15cm_ 1 foil , macroporus mesh _15cm x 15cm_ 1 foil , macroporus mesh _6cm x 11cm_ 6 foils , macroporus mesh _7.6cm x 15cm_ 6 foils , macroporus mesh _30cm x 30cm_ 1 foils , polypropylene mesh _05cm x 10cm_ 6 foils , polypropylene mesh soft _10cm x 15cm_ 1 foil , polypropylene mesh soft _12cm x 15cm_ 1 foil , polypropylene mesh soft _15cm x 15cm_ 1 foil , polypropylene mesh soft _15cm x 30cm_ 1 foil , polypropylene mesh soft _30cm x 30cm_ 1 foil , poly composite mesh size 6cm x 11cm 1 foil , poly composite mesh size 7.6cm x 15cm 1 foil , poly composite mesh size 10cm x 15cm 1 foil , poly composite mesh size 15cm x 15cm 1 foil , poly composite mesh size 30cm x 30cm 1 foil , pe plus pu anatomical mesh left _11cm x 15cm_ 1 foil , pe plus pu anatomical mesh right _11cm x 15cm_ 1 foil , pe plus pu anatomical mesh left _12cm x 16cm_ 1 foil , pe plus pu anatomical mesh right _12cm x 16cm_ 1 foil , pe plus pu mesh _15cm x 15cm_ 1 foil , pp plus plcl tsm _7.6cm x 15cm rectangular_ 1 foil , pp plus plcl tsm _10cm x 15cm oval_ 1 foil , pp plus plcl tsm _15cm x 15cm square_ 1 foil , p plus plcl tsm _15cm x 20cm rectangular_ 1 foil , pp plus plcl tsm _15cm x 20cm oval _ 1 foil , pp plus plcl tsm _20cm x 25cm oval_ 1 foil , plga- absorbable _15_ 1 foil , plga- absorbable _30_ 1 foil , titanium- non-absorbable _15_ 1 foil , titanium- non-absorbable _30_ 1 foil , meril i tack powered tacker n-abs- 15 1 foil , meril i tack powered tacker n-abs- 30 1 foil , meril i tack powered tacker abs15 1 foil , meril i tack powered tacker abs- 30 1 foil , polyester 3d mesh _6cm x 11cm_ 1 foil , polyester 3d mesh _7.6cm x 15cm_ 1 foil , polyester 3d mesh _10cm x 15cm_ 1 foil , polyester 3d mesh _12cm x 15cm_ 1 foil , polyester 3d mesh _15cm x 15cm_ 1 foil , polyester 3 d mesh _30cm x 30cm_ 1 foil , pp 3d mesh size-l_11.5cm x 16.2cm_ left 1 foil , pp 3d mesh size-l_11.5cm x 16.2cm_ right 1 foil , pp 3d mesh size-xl_12.8cm x 17.2cm_ left 1 foil , pp 3d mesh size-xl_12.8cm x 17.2cm_right 1 foil , pp 3d mesh size-m_9.2cm x 14.2cm_ left 1 foil , pp 3d mesh size-m_9.2cm x 14.2cm_ right 1 foil , macroporus mesh _12cm x 18cm_ 1 foil , macroporus mesh _15cm x 20cm_ 1 foil , macroporus mesh _50cm x 50cm_ 1 foil , tsm 10d _circular_ 1 foil , tsm 12d _circular_ 1 foil , tsm 15d _circular_ 1 foil , tsm 20d _circular_ 1 foil

CTN :40903248

21 Jul, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of cross linked high molecular weight sodium hyaluronate for intra articular viscosupplementation 30 50 mg in pfs of 2 6 ml , total knee replacement modular posterio stabilised cr for components see appx , total knee replacement modular posterio stabilised high flex for components see appx , aquacel ag surgical 9 cm x 30 cm x 3 point 5 in x 12 in , locking distal humerus dual plate system with variable locking opton with plus 150 off axis angulation as lateral plate with and without lateral support available , synthetic non absorbable nylon suture size 1 length 18 inch reverse cutting half circle 48 mm needle , 4 point 5 5 mm locking head screw self tapping hexagonal head recess dia point len 26 to 95mm in increments of 5mm ti tan with compatable screw driver , 4 point 5 5 point 0 mm broad lc lcp with combihole for cortical and locking screw with 08 cortical and 04 locking screws titanium tan 7 8 9 10 11 12 14 holes , 4 point 9 mm locking bolts ti tan compatible with afn etn and pfna point 30 mm to 90 mm 5mm increments , a non absorbable sterile synthetic smooth flat suture width 2 mm tape type composed of ultra high molecular weight polethylene meeting of tendon with the bone , adjustable loop suspension device with button sterile ti , afn lateral femoral anatomical nail with distal slot and end cap left sterile tripple layered pack titanium tan 9mm 12mm dia x 340 440 mm length with , all inside meniscus repair device with depth gauge at the end of cannula and two needles with small peek implants with 2 0 fibrewire looped between two implants , cling drape sterile 2 meters , demineralised bone matrix with cancellous bone chips in collagen carrier of equine cortical bone in paste form loaded in a cut of syringe 10cc , disposable suture passer 45 sterile left , disposable suture passer 45 sterile right , disposable trocar set dia point 6 point 5x 70cm sterile , disposable trocar set dia point 8 point 5x 70cm sterile , fiber wire with needle multi color size 2 sterile , graft passing pin with eye hole beath pin drill tip dia point 2 point 4 x 355mm len point , guide wire 2 point 5mm dia x 22 cm , high performance orthopaedic operating gown sterile waterproof wrap around type sealed at seams and not stitched low lint fabric gsm 43 or higher pe reinforced at front and at sleeves , high viscosity bone cement with antibiotic 40gm , hydroxyapetite granules , joint irrigation fluid 3lts in collapsible packs normal saline , knee arthroscopy drape 90 in x 124in sms fabric with fluid collection pouch certified aami l 4 compliance , medium viscosity bone cement with antibiotic 40gm , non absorbant synthetic cotton roll 10cm width x 3 mtr , polybutylate coated braided polyester size 5 1 2 circle taper cut 45 mm single needle sterile foil with single thread , shoulder arthroscopy drape 160 in x 102 in attached fluid collection pouch hook and loop tube and line ce certified aami l 4 compliance , single loaded biocomposite suture anchor peek pldla material preloaded with fibre wire dia 2 point 8 mm 3 point 0mm 5mm sterile , ss wire rolls 18 20 22 gauge , suture disk tibial base plate sterile ti tan sterile pack , synthetic recrystallized hemihydrate calcium sulphate kit to prepare antibiotic impregnated resorbable pellets for delivery of antibiotics locally , titanium elastic nail system dia point 1 point 5 2 point 0 2 point 5 3 3 point 5 4 mm x 400mm , transparent adhesive polyurethane incise drape large with antiglare surface medicated , tricalcium phosphate granules , u drape with sms fabric and dimension 76 in x 120 in 4 in x 40in split tube holders 1 point 5in adhesive tape ce certified aami l 4 compliance , unilateral knee drape set make of impermeable control plus fabric with triple layer waterproof trolley cover of sizex 308 appx one knee o drape with reinforced zone , vertical isolation drape with drape size 90x126 229cmx320cm clear film adhesive incise pouch with suction port ce certified aamil 4 compliance , wire kirschner w

Central Government/Public Sector

CTN :40881144

08 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For 0.14 x 25 mm polyester film backed resin poor epoxy bonded mica paper tape to in.sk. 46053 rev. 01 and in.sk. 46123 rev.-00. total quantity should be supplied(for hand taping only) in rolls bobbin id-55 mm of 50 mr with red centre line only.

Central Government/Public Sector

CTN :40880132

07 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For 0.14 x 25 mm polyester film backed resin poor epoxy mica paper tape rof 277.2 to bp25181 rev 03 in.sk..46084 rev-00 and insk 46124 rev-00.the material should be supplied in rolls of 50 mr for hand taping only. date of mfg. must be written on rolls.

Central Government/Public Sector

CTN :40880133

07 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For 0.14 x 25 mm polyester film backed resin poor epoxy mica paper tape rof 277.2 to bp25181 rev 03 in.sk..46084 rev-00 and insk 46124 rev-00.the material should be supplied in rolls of 50 mr for hand taping only. date of mfg must be written each roll.

Central Government/Public Sector

CTN :40860576

03 Jul, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of aluminum metallized taggant embedded tamper evident polyester film

CTN :40830467

16 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back shall be electros

CTN :40830509

14 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be operated with aesth

Central Government/Public Sector

CTN :40699071

04 Jul, 2025 NA

Halol - Gujarat

Tender For supply of paritex optimized composite mesh polyester wth absorbable collagen film and preplaced sutures (15x15cm) [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Anti Blast Film Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector