Latest anti chemical suit Tenders | Government anti chemical suit Tenders

State Government

CTN :38205486

26 Nov, 2024 76.53 Lacs

Noida - Uttar Pradesh

Tender For p/f road safety item on road between sector-62 & 63 from model town to underpass sector-71, noida. - reflective raised pavement markers (cat eye/road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrite) or hips (high-imoact polystyrene) or acryloniitrite butadien styrene (abs)or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4280.the reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. lenses shall be mouled of methyl methecrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm., the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name , trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are displaced , damaged , get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labour, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge. rpm (with shank) uppwd sor:-morth-804 (8.35)-suggestiv, flexible median marker as per irc 79:20:19 flexible median marker (fmm) should be used for improving median visibility during dark hours. use of median marker provides safety against collision happening with medians during night time, or serve whether. flexible median markers shall be provided with fluorescent yellow colour retro reflective sheeting type xi as per irc 67, flexible median marker shall be of tough high impact resistant injection molded thermoplastic body with property of flexibility to provide high durability and u shape structure having rebound, bounce back property the sheeting shall be type xi confirming to irc 67 and it should be own both the faces whereby providing maximum reflectivity at i, anger distance with adequate durability the logo of the manufacturer shall be embossed on either side of the body during the injection molding process fmm shall be fixed by a combinitation of apoxy adhesive and grouting drilling on concrete median of properly constructed solid medians. height. the marker height shall be a median of 180mm, width 120mm and body thickness 6.5mm, the shanks shall not be less than 20mm and depth shall not be less than 30mm reflective area shall not be less than 90cm square proof of the same report shall be uploaded which quoting tender., the body of fmm shall bounce back to its original position of after 750 number of hits using pendulum of 1.8 kg confirming 40 astm d256 adhesion between the body and outer casing body of fmm shall with stand 50kg. tensile loads confirming to astm d638 method, the rate shall be include all materials,labours, t&p transportation installation and incidentals all complete as per direction of the engineer-in-charge ., solar power road marker (solar studs) the solar s

Central Government / Public Sector

CTN :38184446

22 Nov, 2024 44.95 Lacs

Mathura - Uttar Pradesh

Tender For custom bid for services - internal haullage contract of bdfp and transit camp housing complex at mathura for period of 5 months-internal haullage and housekeeping contract of bdfp mathura and radhika vihar guest house for 5 month- part a: routine operation & maintenance: 1. housekeeping & mopping of the following areas on continuous basis as mentioned against each item. this includes removing of dust, dirt, water, waste materials, oil soaked clothes, shifting wastes outside plant area, removal of beehives , cobwebs as and when required, cleaning of roof once in a month etc. in licensed, unlicensed area as given below: (consumables to be provided by iocl. payment to be made on monthly basis). contractor to provide one hand rickshaw trolley during the duration of contract for collection of garbage etc. 1.1. housekeeping and mopping of admin / office building, control room, record room, staff room, old s&d ,ppe room etc. complete on daily basis. this includes sweeping, removing of dust, dirt, water, waste materials, oil soaked clothes, shifting wastes outside bdfp, removal of beehives, cobwebs. twice in a day for some area whenever instructed /required.(duration-daily). 1.2. pmcc, all sub-stations, security buildings, lab, transformer room,under supervision of electrical in charge on daily basis. (duration-daily). 1.3. housekeeping or cleaning of car & scooter parking area, security cabin of bdfp, tt parking area, ttpa security cabin,open area between ttpa and security rooms, drivers' rest room & adjoining toilets, area outside plant boundary wall up to main road. contractor shall have to call labor on sunday / off day for or desirable date for washing / cleaning of ttpa driveways.(duration-daily) 1.4. cleaning of drains outside & inside bdfp, between boundary wall and main road, complete cleaning and making the drains through for flow of water and disposal of the waste to an appropriate place. (duration-weekly). all storm water and any other drains inside/outside bdfp premise.tlf shed & complete tlf driveways, old pump house, crmb pump house and surrounding areas, road between main gate and tlf gate, compressor shed etc. on daily basis. contractor shall have to call labor on sunday /off day for washing / cleaning of tlf driveways, stacking at dirt pit and disposing the same on same day by suitable transport to an unobjectionable place outside the plant.(duration-daily). 1.5. safety & maintenance material store, main lube store etc on daily basis.(durationdaily). all driveways and roads including berms, all the three existing tank farm areas, circular roads etc complete on daily basis. (duration-daily). 1.6. cleaning of all toilets of admin building, conference hall of bdfp and ttpa driver s rest room, control room, lic cabin, security guards hall etc. at least twice on daily basis and keeping it clean at all the times. (duration-daily) cleaning of all tanks roof dirt, vegetation etc, removal of scrap, vegetation from fencing / concertina wirings on weekly basis as per the directions of location-in-charge/m&r officer. (durationweekly). cleaning of all the building roofs of all dirt, vegetation etc of bdfp on monthly basis as per the directions of location-in-charge. all the outer walls of all the building to be checked for any vegetation growth and removed regularly.(durationmonthly). cleaning/dusting of all doors, window-panes, and office -almirahs of all buildings on monthly basis as per the directions of location-in-charge.(durationmonthly),cleaning of old tank farm area, including cleaning of tank roof, removal of all dirt, vegetation and waste etc. in the tf area. 2. supervision of all the activities, job include taking instructions from plant i/c and other officers, lining up of activities for getting the job done. assistance in local purchases and other miscellaneous jobs on daily basis. (the person shall be equipped with mobile phone and conveyance- rates are inclusive of conveyance and

CTN :38194741

20 Nov, 2024 NA

Visnagar - Gujarat

Tender For contractor for the various works - 1. materials rate for aggregate, metals, clean sand, great 10 mm, bricks, cement, light weight block, dust material required in building construction work 2 rate for flooring materials: flooring tiles, bathroom tiles, granite, kota stone, wall tiles, waterproof mojek tiles, (make: - simpolo, varmora, somany brands) 3 all type of fabrication work in all buildings 4 fallceiling, p.o.p and a.c.p. work labour with materials 5 air conditioning (brand: toshiba, o'general, mitsubishi ac.) 6 all type of furnitures in all buildings 7 led display in campus at various places. (size: 2' x 3' feet) other requirements:- 8 plumbing materials, sanitary wares, electrical materials, electrical distribution panel, aluminum section materials, hardware accessories, glass materials, stainless steel -304, color materials, rolling shutter, compact sheet, bhusa sheet, fire safety system and other miscellaneous materials required in building 9 quality labor work for rcc, brick masonary, plaster, plumbing, brickbat coba, water proofing, tiles flooring, groove filling, color, alluminum section, electric, fabrication work for building.

CTN :37768826

19 Nov, 2024 NA

Kolkata - West Bengal

Tender For corrigendum : supply of drop keels and arrangement for yard 3041 orv - drop-keel_4009215700011000055207_3041 , drop keel rails_4009215700021000055207_3041 , elect. operated winches for drop keels_4009215700031000055207_3041 , mechanical locking system drop keels_4009215700041000055207_3041 , complete accessories for drop keel_4009215700051000055207_3041 , mechanical safety arrangement_4009215700061000055207_3041 , manual locking devices_4009215700071000055207_3041 , video camera with video recording_4009215700081000055207_3041 , cathodic protection -anode- for dropkeel_4009215700091000055207_3041 , spare pipes for stbd keel diameter 60mm_4009215700101000055207_3041 , spare pipes for stbd keel diameter 150mm_4009215700111000055207_3041 , spare pipes for port keel diameter 60mm_4009215700121000055207_3041 , control panel_4009215700131000055207_3041 , on board spares_4009215780001000055207_3041 , special tools and test equipment_4009215789001000055207_3041 , binding and install drawings, manuals etc._4009215790001000055207_3041 , as-made drawings, fat reports, graqs_4009215790011000055207_3041 , inspection and test certificates_4009215790021000055207_3041 , mtc and gc_4009215790031000055207_3041 , commissioning spares_4009215787001000055207_3041 , install tools, materials and consumables_4009215788001000055207_3041 , eng. serv. install.,connectorisation and stw_ser105071000055207 , equpt. training operational and maintenance-_ser105081000055207

State Government

CTN :38151943

19 Nov, 2024 NA

Ghaziabad - Uttar Pradesh

Tender For supply of welding shop materials for day to day inhouse repair and maintenance works - ms hinges for steel window , ms hinges for ms door , iron section handles , cut-off wheel , chop saw metal cutting wheel , leather welding safety hand gloves , lubricant oil can lubricator , star bit 6mm , drill bit 6mm for metal drilling , drill bit 8mm for metal drilling , drill bit 9mm for metal drilling , freemans steel measuring tape 5m , freemans steel measuring tape 10m , freemans measuring tape 30m , tile cutting blade size 4 inch , tile cutting blade size 5 inch , welding electrodes

Central Government/Public Sector

CTN :37963382

16 Nov, 2024 29.00 Lacs

Secunderabad - Telangana

Tender For corrigendum : repair and maintenance to lt electric supply and connected works at afs hakimpet under ge (af) hakimpet - note:-1. the contractor should visit the site before quoting the tender to know the working condition of the station.2. all requisite safely measures are to be adopted by contractor on site.3. the contractor shall provide and deploy sufficient electrician (as approved by ge / engineer in charge) shall report at 9:00 hrs to je e/m / engineer in charge to collect the complaints job card in working days and complete the same completed within 24 hrs.4. the complaints shall be rectified within 24 hrs if the complaints is/are not attended / not completed within 24 hrs (except repair/replacement of major items) recovery will be done at rs 500 per complaint per day.5. for major parts like replacement of mcb, dbs, mccbs etc should be rectified within 3 working days, if the contractor not rectify within time then recovery will be done at rs 1000 per complaint per day.6. after completion of job work complaint, the contractor has to produce job card duly signed by user & je / engineer in charge.7. if contractor failed to provide their electrician to attend the complains then recovery will be done at rs 1000 per day.8. the contractor should procure minimum 50% of the materials for all items as per boq (other than paints) mentioned in this ca, within 20 days after getting sample approval and kept in safe custody so that no delay in work due to non-availability of materials will be faced. contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of work. if contractor fail to complete the work within contract due to lack of fittings a penalty of 20% shall be applicable on quoted rates by the contractor.9. in repair works, rate quoted for demolition /dismantling /taking down is deemed to be inclusive of removing the same from site and station.10. in maintenance works, the contractor should maintain separate registers for repair works. day to day complaints should be noted in those registers with si nos of complaints, location qty of work, status of complaints and signature of in charge and stamp of the office. formal will be given from concern age office. the contractor should obtain the signature of in charge on the same day of work. these register to be submitted to je (e/m) on every weekend without fail.11. the contracts involving working at elevated locations of buildings, contractor should ensure proper safety arrangements as per norms. wearing safety belts and helmets are mandatory. a penalty of rs 1000 per day will be recovered from contractor if safety norms are not followed.12. after completion of work, no stores/debris/ loose items be kept at work site or dumped inside station . entire area to be cleared and waste material be taken outside from the station ., excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth and getting in hard/dense soil for laying of cables/ for erection of poles/ for stay assembly etc complete all as specified and directed by engineer-in-charge., boaring/ drilling (horizontally ) of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including hdpe pipe of 80 mm dia suitable for 0.4 mpa working pressure. all as specified and directed by engineer in charge.., supply and spread clean dry river sand in trenches for cushioning of cable complete all as specified and directed by engineer-in-charge. (note: punned down thickness only shall be measured for the purpose of payment), supply and fix precast concrete cable covers class lv type 1, flat size 250 x 150 x 40 mm m-20 grade concrete laid dry for cable protection complete all as specified and directed., returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by engineer-in-charge., removing surpl

CTN :38078061

20 Nov, 2024 NA

Kolkata - West Bengal

Tender For supply of gas safety burner for yard 3041 orv - gas safety burner_8242410000001000054578_3041 , peripherals-associated system_8242410000011000054578_3041 , installation materials and accessories_8242419300001000054578_3041 , on board spares_8242419700001000054578_3041 , special tools and test equipment_8242419500001000054578_3041 , documentation_8242419900001000054578_3041 , service engineer_ser104911000054578 , training_ser104921000054578

Central Government/Public Sector

CTN :38087095

23 Nov, 2024 7.99 Lacs

Bardhaman - West Bengal

Tender For supply of civil work items - portland pozzolona cement , river bed coarse sand , aggregate coarse aggregates , bricks fly ash bricks 230 x 110 x 70 , tmt bar 10 mm dia , mirror 450 x 600 mm , door closer , ss towel rail 600 mm long , ptmt soap dish 450 x124x36 , synthetic enamel paint , door stopper , 25 mm slotted countersunk head wood screw 25x4 , 30 mm slotted countersunk head wood screw 30x5 , 35 mm slotted countersunk head wood screw 35x8 , 50 mm slotted countersunk head wood screw 50x4 , 75 mm slotted countersunk head wood screw 75x8 , tapping screw length 13 mm , tapping screw length 19 mm , tapping screw length 25 mm , pvc gitti pvc fastening bullet 1point5 inch , ms hasps and staples safety type 90 mm long , ms hasps and staplessafety type 115 mm long , ss door handle 6 , barrel tower bolt 150 mm long , barrel tower bolt 100 mm long , ms butt hinges 75 mm , ms butt hinges 100 mm , window float glass 4 mm thick , window float glass 5 mm thick , putty , white cement , ms oxidised sliding door bolt 300 x 16 mm , oxidised ms casement stay straight peg type 300 mm long , water proofing materials

corporations/Associations/Others

CTN :38023359

14 Nov, 2024 27.00 Lacs

Surat - Gujarat

Tender For corrigendum : repairing & desilting of machine holes by entering skill labour with using necessary protecting gears and safety equipments, placing plugs and dewatering pumps etc. in various existing sewage/storm drainage lines, machineholes etc. including carting of desilted materials, and debris from site in various society area / at various places of sub zone -2 in south west (athwa) zone.

corporations/Associations/Others

CTN :38023364

14 Nov, 2024 24.00 Lacs

Surat - Gujarat

Tender For corrigendum : repairing & desilting of machine holes by entering skill labour with using necessary protecting gears and safety equipments, placing plugs and dewatering pumps etc. in various existing sewage/storm drainage lines, machineholes etc. including carting of desilted materials, and debris from site in various society area / at various places of sub zone -1 in south west (athwa) zone.

Anti Chemical Suit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others