Latest anti corrosive treatment Tenders | Government anti corrosive treatment Tenders

State Government

CTN :44120094

06 Mar, 2026 2.95 Lacs

Sealdah - West Bengal

Tender For nrsmc h repair work of existing floors and walls of various toilet blocks by epoxy grout at lady elliot doctor s hostel baker building nurses hostel electrical sub station building etc during the fy 2025 26

CTN :44068239

11 Mar, 2026 17.64 Lacs

Bhavnagar - Gujarat

Tender For supply of annual maintenance of perigee light vessel d d -tug hire charges , sand blasting , spray painting of under water area , spray painting of above water area , bus green epoxy paint , metal primer epoxy , p o red epoxy paint , thinner , sea going skilled labour , miscellaneous purchase , overhauling winch assembly , thickness gauging , fabrication work , installation of zinc anode , supply of kenter shackle , supply of swivel , fitting and welding of shackles , sand blasting and painting of mooring chain , welding , port dock charges

State Government

CTN :43101368

24 Feb, 2026 5.46 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : providing and applying paint and epoxy lining work and miscellaneous civil works for dm plant at tps gandhinagar

State Government

CTN :44022453

23 Feb, 2026 NA

Dharwad - Karnataka

Tender For supply, installation, testing, and commissioning (sitc) of specialized laboratory furniture - supply and fixing of furniture work for laboratory at nfsu dharwad campus, c-frame m-island (crca) - 4560 mm (l) x 1260 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. jet black granite (62 sq ft) assembly of construction for work bench: c frame systems are the modern lab furniture architecture. based on a cantilevered design, c-frame systems do not need legs for support. c-frames assemblies are manufactured from standard hollow metal sections, confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components are of crca confirming to is code 513:1994. the suspended under-bench welded units are supported on heavy-duty steel frames fully carrying the load of worktops. c-frame are constructed from a rectangular pipe with a cross section of 60mm x 30 /40 mm and 1.6/2 mm thick, are without a vertical front leg to give a clean look. the c-frame legs are supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. the structure has removable back panel (wherever required as per design finalization) to provide access for maintenance throughout the length of table. the structure shall be duly treated for the rust prevention and coated with epoxy powder coated (with minimum thickness of 60 micron). the horizontal frames connecting the c frames and other required frames shall be of the similar specifications. together with the c-frames and horizontal members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed and the hanging-type storage cabinets can be suspended. material of construction for work bench: 18-20g thick crca sheet. interior & exterior will be provided with powder-coated finish. (50-70microns) storage - 600 mm wide one drawer two shutter with one shelf storage, 2 no wheel lockable + 2 no wheel non lockable (qty - 6) structure - 60 mm x 30 mm x 1.6 mm ms pipe (qty - 5) filler panel - removable panel 600mm to 900 mm (qty - 12) - filler panel (qty - 2) reagent rack - double side double tire reagent rack - (qty - 3) electrical module - 3m plate with 16/6 amp socket and 16 amp mcb or switch (make: havells/anchor / norysis/equivalent) (qty - 12), plinth m-wall (crca) - 1400 mm (l) x 750 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. jet black granite (11 sq ft) material of construction for work bench: 18-20g thick crca sheet. interior & exterior will be provided with powder-coated finish. (50-70microns) storage - 600 mm wide two shutter under sink (qty - 2) filler panel - filler panel (qty - 2) sink & tap - polypropylene sink 560x355(qty - 2) - three-way swan neck cpve & brass faucet (qty - 2), d-frame m-wall (crca) - 1200 mm (l) x 750 mm (w) x 900 mm (h) worktop material: the worktop should be 18mm (+/- 2mm) thick jet-black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v groove throughout the length of the exposed edges to protect the cabinets from meeting the spillages. the overhang on the storage cabine

CTN :44056708

23 Feb, 2026 NA

Katihar - Bihar

Tender For supply of galvanized mild steel fire bucket 9 liter, conforming to is:2546 latest, mild steel black sheets used for the manufacture of buckets: conforming to grade st 34 or grade st 42 of is: 1079, mild steel rod used for the top and bottom handles: conforming to is:226, mild steel wire used for stiffening the top rim: conforming to is 280, paint: enamel paint, inside paints finish for painting of fire buckets: white to is 641, outside paint: fire red, painting of handle, ears and letters: black in color conforming to is 128, shade of outside color: fire red conforming to shade no 536 of is 5, shape and essential dimensions: as per clause 3.1 of is 2546, body: the body shall be in two halves which shall be joined together by butt welding. the top rim of the body shall be wired and uniformly beaded. the beading shall be fully formed without gaps. the thickness of body shall be 1 mm and diameter of beading wire of 3.55 mm, bottom: the bottom shall be dished and shall be joined to the body by butt welding so that there is no raw edge or crevice on the inside of the bucket. the thickness of the bottom sheet shall be 1 mm. ears: the ears shall be made of mild steel sheet and shall be fitted to the body at the top by means of welding with the flat head on the side. the thickness of sheet for ears shall be 2.8 mm., top handle: made of mild steel rod of 10 mm diameter, anti corrosive treatment after manufacturing: zinc coating of 0.06 mm minimum

Central Government/Public Sector

CTN :44031526

21 Feb, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 15 )items as given below ,[1] disman,corroded rain water pipe&gutter 40.000 to,[2] disman,sheet,cgi on roofing/walling 17500.000 m2,[3] clng,gutter,transpt to slag bank 3000.000 m,[4] fab,strl steel w/bolt,nut 60.000 to,[5] ern,fabricated strl steel wrk,item no4 60.000 to,[6] ern&fixg,sheet,cgi/frp 16000.000 m2,[7] disman,rain water pipe by gas cutting 100.000 m,[8] fab&ern,rain water pipe,ms 100.000 m,[9] cutg,cgi sheets 300.000 ea,[10] prvdg,fillet weld,thk6mm 100.000 m,[11] lifting,fab strl steel matl 60000.000 kg,[12] apply two coats primer clear epoxy paint 1200.000 m2,[13] labour chrg,mkg sheet curved,cgi 500.000 m2,[14] fixg,loose sheet,cgi 4000.000 m2,[15] clrg u/gnd drn pipe upto & incl 600 mm 200.000 m

corporations/Associations/Others

CTN :43951047

24 Feb, 2026 NA

Salem - Tamil Nadu

Tender For name of the work:: mtps-i - mill plant - a.c plant – unit-i – aoh 2026-27 - air washer system – epoxy painting of blowers , discharge duct & spray system , spray nozzles flushing works- replacement of damaged air washer blower shaft with hub –- overhauling the awcw pumps and gate valves – providing handrails in air washer circulating water pump room.

State Government

CTN :43982252

24 Feb, 2026 98.34 Lacs

Chandigarh - Chandigarh

Tender For providing new furniture items in library at punjab vidhan sabha - supply of 8 seater reading table (2350 x 1150 x 740) having following specificationsproviding and placing work table of size 2350 mm (w) x 1150 mm (d) x 740 mm (h). worktop shall be made of 25 mm thick mdf one side pre-laminated board conforming to is:14587:1998 with 0.4 mm pvc membrane pressed on top and having chamfered edges, with access panels provided with soft-closing hinges. understructure shall consist of a combination of 25 mm and 18 mm pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990, edge-banded with matching 2 mm thick pvc lipping, with anodised aluminium alloy 63400-wp profile added at bottom edges for improved aesthetics; construction shall be of knock-down type. wire raiser shall be made of 0.8 mm crca ms conforming to is:513, epoxy polyester powder coated (dft 40 60 microns) for carrying wires and cables, with cutout provision below access flap at two locations for standard 8-module anchor roma, and additional cutouts with plates shall be provided beside each for mounting audio visual cables (e.g. hdmi, vga-a, etc.). this product should be certified by greenguard, iaq gold, greenpro and griha. as per sample selected, supply of book rack (1200w x 595d x 2078h) having following specificationsproviding, supplying and placing bookracks with body side panels, frame and cross l-brackets made of 0.8 mm crca sheet conforming to is:513. the assembly shall consist of 2 tie rods, 4 fixing brackets and 2 turnbuckles, with tie rods of 4 mm diameter ms arranged in x shape and fixing brackets made of 2 mm thick crca sheet conforming to is:513. wooden panel shall be 25 mm thick plt board of e1-p2 grade with edges machine pressed with 2 mm thick pvc lipping glued with hot melt eva adhesive. understructure shall be made of 0.8 mm crca (is:513) of size 1200 mm (w) x 595 mm (d) x 80 mm (h) for single body. shelves shall be 10-bend panels made of 0.8 mm crca sheet (is:513), placed on shelf supports and fixed using nut and bolts from below, consisting of 6 loading levels formed by 5 adjustable shelves for each main and add-on unit, each shelf with uniformly distributed load capacity of maximum 80 kg. construction shall be completely knock-down type. all ms sheet metal and frame components shall be epoxy polyester powder coated to a minimum thickness of 45 microns. add-on units shall be stackable widthwise to form a bank of racks with common side panels up to 4800 mm width. shelves shall have back stiffeners at the rear side made of 0.8 mm thick crca (is:513) acting as separators. label holder shall be aluminium extrusion of 596 mm length fitted on the front of body, with 300 gsm matt finish paper insert of 596 mm length. book separators shall be made of 2 mm thick crca sheet (is:513), serving as partitions and supports for vertically placed books. this product should be certified by greenguard ,iaq gold . as per sample selected, supply of reception desk (2400w x 725d x 740h) including drawer unit on both sides and pedestal having following specifications supplying and placing in position reception table of size 2400 mm (l) x 725 mm (d) x 740 mm (h), the work surface shall be made of 25 mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990, edge-banded with matching 2 mm thick pvc lipping, with access flap and grommet provided for wire management. wire management shall include a power box made of 0.8 mm thick crca sheet conforming to is:513 with switch plate provision of 8+3 module anchor roma, fixed along the worktop width at access flap position. modesty panel and side skirting shall be made of 25 mm thick pre-laminated twin board of e1-p2 grade and approved shade conforming to is:12823:1990 with 2 mm thick pvc lipping. understructure shall be made of 18 mm thick pre-laminated twin board of e1-p2 grade, edge-banded with 2 mm thick pvc lipping. top shelf shall be of 18 mm thick pre laminat

State Government

CTN :43983684

23 Feb, 2026 5.08 Lacs

Kochi - Kerala

Tender For second floor sheet work on roof including truss work, painting with epoxy and side closing of truss side with particle board and dismantling old sheet and truss

Central Government/Public Sector

CTN :43971299

09 Mar, 2026 NA

Dhanbad - Jharkhand

Tender For gc section:- repair work like desilting, epoxy grouting, flooring , inspection steps, chequered plate etc of various major bridges(i.e. bridge no.34a, 39, 42a, 71, 116, 150, 151, 160, 167, 187, 202, 332 & 416) in the jurisdiction of sr.den/2/dhn.

Anti Corrosive Treatment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors