Latest anti fouling system Tenders | Government anti fouling system Tenders

corporations/Associations/Others

CTN :43084950

15 Dec, 2025 4.00 Lacs

Karur - Tamil Nadu

Tender For corrigendum : stopping water leakage on the roof of the pugalur municipal council hall with epoxy coating at pugalur municipal office in pugalur municipality.

Central Government/Public Sector

CTN :43125681

31 Dec, 2025 NA

Katipala - Karnataka

Tender For providing of custom bid for services - mrpl tender 3900001934 for service code 1003007 scaffolding erection & dismantling as per attached boq bidder has to quote lumpsum amount including gst,custom bid for services - for service code 1025097 surface preparation by grit blasting as per attached boq bidder has to quote lumpsum amount including gst,custom bid for services - for service code 1003000 three coats of epoxy phenolic coating as per attached boq bidder has to quote lumpsum amount including gst

Central Government/Public Sector

CTN :43151722

15 Dec, 2025 NA

Rourkela - Odisha

Tender For epoxy based coating for walk way guide l(3items) comprising of following: 1 - sprinkle quartz f / floor tech sl , 2 - floortech sl,compres strength:650kg/cm2 , 3 - epoxy primer f / floortech sl ,

State Government

CTN :43113236

05 Jan, 2026 17.27 Lacs

East Nimar - Madhya Pradesh

Tender For work contract for anti- corrosive, anti- abrasive polymeric epoxy coating on surface of condenser tube sheet and water box installed at unit 3, 2x660 mw, sstpp, mppgcl, dongalia.

Corporations And Associations And Others

CTN :43117081

17 Dec, 2025 67.97 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall b

Central Government/Public Sector

CTN :43094558

26 Dec, 2025 NA

Raigad - Maharashtra

Tender For tender for supply of chemical spray - pufseal comp amm v , stanvac z906 anti track epoxy coating , battery coating 6006 stanvac , stanvac 901 easy clean , fast steel epoxy putty stick z801 , quik solvent z137 stanvac , penetrating oil spray-500ml , rust loosener spray cans tf 77 400ml , crc 2 26 spray , safety solvent 8060 electrical 88 , 6084 red insul varnish , rustoline in 500 ml tin

Central Government/Public Sector

CTN :42777200

15 Dec, 2025 44.70 Lacs

Darjeeling - West Bengal

Tender For corrigendum : special repair to epoxy coating and provn of roof sheet, kota stone, pathway at sevoke road mil stn under ge sevoke road

Central Government/Public Sector

CTN :43071013

13 Dec, 2025 NA

Medak-T - Telangana

Tender For b9ays00192 epoxy coating

Central Government/Public Sector

CTN :43081656

27 Dec, 2025 NA

Mumbai - Maharashtra

Tender For notice inviting tender for annual rate contract for supply of general items at rcf trombay unit - m-seal,phataphat,fast curing, rust disintegrator,500 ml, epoxy adhesive liquid,36 gm, gasket shellac compound,50 ml, grafseal tape,19.05 mm x 0.5 mm, grafseal tape,12.7 mm x 0.5 mm, grafseal tape,25.4 mm x 0.5 mm, teflon tape, 12.7 mm x 0.5 mm,std roll, teflon tape, 19.05 mm x 0.5 mm,std roll, teflon tape, 25.4 mm x 0.5 mm,std roll, sheet polythene, 44"x 100 micron, 5kg, rust remover spray-700ml, measuring tape, 5 meter-metalic, measuring tape,15 meter-metalic, constant level oiler,spring type,1/4"npt, anti-friction coating spray-400ml, lint free cloth/marking cloth, prussion blue 60 ml tube., penetrating oil spray-500ml, shim roll 1 m x 1 m x 0.05mm, ss 304, hacksaw blade,12 in, hss, constant level oiler,pullout, 1/4" npt, measuring scale,6inch,stainless steel, epoxy cold welding compound, cotton rags of muslin cloth size 42sq.in, paint remover (paint stripper), 100% silicone gasket maker,pidilite, nam-s-02-graphited tape-1.5"x0.5x10m, shim roll 1 me x 1 me x 0.5mm, ss 304, shim roll 1 me x 1 me x 1mm, ss 304, shim roll 1 me x 1 me x 0.1mm, ss 304, shim roll 1 me x 1 me x 0.2mm, ss 304, phs-visible lpt cleaner spray, phs-visibile lpt penetrant spray, phs-visible lpt developer spray, bearing de-greasing spray-700ml, rust sealer spray-700ml, thermoplastic acrylic coating spray700ml, cold galvanizing compound spray-700ml, sacrificial coating spray-500ml, steel rule size 1 meter, steel rule size 2 meter, emery polish paper 2/0, emery polish paper 4/0, nickel based anti seize compound, grease gun heavy duty - m-seal,phataphat,fast curing, rust disintegrator,500 ml, epoxy adhesive liquid,36 gm, gasket shellac compound,50 ml, grafseal tape,19.05 mm x 0.5 mm, grafseal tape,12.7 mm x 0.5 mm, grafseal tape,25.4 mm x 0.5 mm, teflon tape, 12.7 mm x 0.5 mm,std roll, teflon tape, 19.05 mm x 0.5 mm,std roll, teflon tape, 25.4 mm x 0.5 mm,std roll, sheet polythene, 44"x 100 micron, 5kg, rust remover spray-700ml, measuring tape, 5 meter-metalic, measuring tape,15 meter-metalic, constant level oiler,spring type,1/4"npt, anti-friction coating spray-400ml, lint free cloth/marking cloth, prussion blue 60 ml tube., penetrating oil spray-500ml, shim roll 1 m x 1 m x 0.05mm, ss 304, hacksaw blade,12 in, hss, constant level oiler,pullout, 1/4" npt, measuring scale,6inch,stainless steel, epoxy cold welding compound, cotton rags of muslin cloth size 42sq.in, paint remover (paint stripper), 100% silicone gasket maker,pidilite, nam-s-02-graphited tape-1.5"x0.5x10m, shim roll 1 me x 1 me x 0.5mm, ss 304, shim roll 1 me x 1 me x 1mm, ss 304, shim roll 1 me x 1 me x 0.1mm, ss 304, shim roll 1 me x 1 me x 0.2mm, ss 304, phs-visible lpt cleaner spray, phs-visibile lpt penetrant spray, phs-visible lpt developer spray, bearing de-greasing spray-700ml, rust sealer spray-700ml, thermoplastic acrylic coating spray700ml, cold galvanizing compound spray-700ml, sacrificial coating spray-500ml, steel rule size 1 meter, steel rule size 2 meter, emery polish paper 2/0, emery polish paper 4/0, nickel based anti seize compound, grease gun heavy duty

Central Government/Public Sector

CTN :43089086

05 Jan, 2026 NA

Chennai - Tamil Nadu

Tender For supply and application of high performance anti corrosion epoxy coating(two pack) finishing paint colour:green to specn.rdso/m&c/pcn/123-2018,on coachcomponents for various builds as per following reference drawings.1.465-9-0-003 alt

Anti Fouling System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors