Latest anticorrosive treatment Tenders | Government anticorrosive treatment Tenders

Central Government/Public Sector

CTN :40809955

23 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : supply of roof mounted ac package unit ( rmpu) for lhb eog ac in coach sets consisting o f rmpu ( with r-407c refrigerant) - 02 nos as per rdso/pe/spec/ac/0061-2005, rev-1, type -1. and microprocessor controller unit - 01 no as per rdso/pe/spec/ac/0139-2009, rev-1, with bellow duct made of meta aramid/ para- aramid fabric with silicon rubber coating on both sides to spec no rdso/pe/spec/ac/0197, rev-0, rmpu unit complete with accessories, as per scope of su pply as in the rdso spec. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40905524

14 Jul, 2025 NA

Bengaluru - Karnataka

Tender For supply of bellows set consisting of 1 no. of supply air below, 2 nos of fresh bel lows and 2 nos of return air bellow ducts made of meta aramid / para aramid fabric with si licone rubber coating on both sides for lhb eog /hog type ac coaches as per rdso specifica tion no. rdso / pe / spec / ac / 0197 -2020. scope of the supply as per clause no. 2 of the above specification. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40917593

14 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of web welded with top plate as per drg.no.- le11313 alt-a & le11318 alt-a with welding as pe r rdso guidelines for irsm-41 and with red oxide zinc chromate primer coating. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40918299

30 Jul, 2025 NA

Delhi - Delhi

Tender For supply of conical (belleville) washer size id 13mm, od 29mm and thickness 3mm for tm cable connections of 3-phase locos. material spring steel with phosphate coating as pe r din:6796. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40661112

14 Jul, 2025 NA

Bengaluru - Karnataka

Tender For corrigendum : supply of bellows set consisting of 1 no. of supply air below, 2 nos of fresh bel lows and 2 nos of return air bellow ducts made of meta aramid / para aramid fabric with si licone rubber coating on both sides for lhb eog /hog type ac coaches as per rdso specifica tion no. rdso / pe / spec / ac / 0197 -2020. scope of the supply as per clause no. 2 of the above specification. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40867305

26 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of roof mounted ac package unit ( rmpu) type-1 for lhb eog coaches in c oach set, consisting of rmpu with r407-c refrigerant-02 nos. to the rdso specification no:r dso/pe/ spec/ac/0061-2005 (rev-1) and microprocessor controller unit-01 no. as per rdso spe cification no:rdso/pe/ spec/ ac/0139-2009 (rev-1), type-i, complete with accessories as per sco pe of supply as envisagedin the rdso specification with supply of bellows set consisting of 01 no. supply air bellow, 02 nos. fresh air bellows & 02 nos. return air bellows ducts made of meta aramid/ para aramid fabric with silicon rubber coating on both sides for lhb eog/h og type a.c. coaches as per rdso specification no:rdso/pe/ spec/ ac/0197-2020 (rev-0.). scope o f supply as per clause no.2 of the above specification. material must be procured from rds o approved sources only. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40837596

08 Jul, 2025 14.76 Lacs

Nashik - Maharashtra

Tender For procurement of hvac items components and accessories at acem under emu r and d nasik - d scaling for chemical, chemical, top up the gas in the refrigent working/non-functional units after pressure testing, vacuum testing, and leak testing up to required pressure and flow rate to maintain temperature etc. complete of split window/ vrf/ compressor unit of various ratings., providing & supply following field devices as per directions of engineer-in-charge., valve actuator. 50mm, level switch, float valve, thermostat, temperature sensor, pressure gauge, temperature gauge, expansion valve, volt meter, ammeter, selector switch, air dryer, indicator, compressor oil, providing laying, testing & commissioning of c class heavy duty ms pipe conforming to is 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required., 80mm, 65mm, 50mm, 40mm, providing & supply following refrigerant copper tube & nitrile insulation as per directions of engineer-in-charge., 1 copper tubes, copper tubes, copper tubes, 3/8 inch copper tubes, providing & supply globe valves as per directions of engineer-in-charge., 125 mm (5"), providing & supply check valves as per directions of engineer-in-charge., 75 mm (3 "), providing, fixing and supply following size y strainers as per directions of engineer-in-charge., 50 mm (2"), 65 mm (2. 1 2 "), providing, fixing and supply following size pot strainers as per directions of engineer-in-charge., 100 mm, providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :, 25 mm (1"), providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :, 15 mm, 20 mm, 25 mm, providing and fixing gun metal non- return valve of approved quality (screwed end) as per directions of engineer-in-charge., 65 mm, providing, fixing and supply following electrical accessories as per directions of engineer-in-charge., mccb 100a / 415v / 50hz make and model as per existing system required., mccb 200a / 415v / 50hz make and model as per existing system required., sfu 63a / 415v /50hz fn 63 as per suitable in existing panel, sfu 32a / 415v /50hz fn 32 as per suitable in existing panel, motor protection relay range 0 - 20a/240v/50hz make minilec for existing panel, plc card, three phase monitoring relay, mod motor ll sensor, vfd 3.7 kw motor

Central Government/Public Sector

CTN :40848868

17 Jul, 2025 NA

Jodhpur - Rajasthan

Tender For supply of gi bolt size 8x16 mm is:1363 (pe-2) 84 tab,1&2, property class-4.6, type of finish is required is electroplating coating.

CTN :40821460

08 Jul, 2025 NA

Multi City - Rajasthan

Tender For requirement of safety, rescue and security items for ssctps fy 2025-26, suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap, gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch), barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5, chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160, acid/ alkali proof gloves having size of 18 inch with palm m, normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton, fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics, safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white, safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green, impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003, foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592, carry sheet ( stretcher)l x b: 212 x 75 cm with self weight 1 kg , load limit 159 kg , lift type: horizontal, wind indicator made of light weight pu coated nylon material. double stitch at all joints. plastic eyelets gives anticorrosion proper ties. the complete wind sock comes with a polymer packing. 2 dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe., ear plugs corded epsav-570, nose/ dust mask rpsav -p2, flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164, vapour respirator with head stripes to accommodate twin cartridges with exhalation valve, safety net consisting of pp rope dia: 4mm, mesh size: 100 mm,outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr, ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a), heat shield hand gloves made of normal and tannedsplit leather of reddish brown colour. insulating thermalbarrier as inner layer gives heat protection upto 250 degrees.thumb re inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344, insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991, electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991, hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350 c temperature.it should be atira tested for 250 c splash, tested to iso 5025,9151,6942,9185 and en 1875-3, chemical splash goggles with indirect ventilation, protect against splash and a hard coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003, chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003, elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv, chemiflex latex gloves, length-300 mm, en size- l coating material- natur

CTN :40808350

04 Jul, 2025 13.22 Lacs

Ganganagar - Rajasthan

Tender For requirement of safety, rescue & security items for ssctps fy 2025-26,suratgarh - head up light with alkaline batteries with adjustable cloth stripper for head and rubber strap , gum boots with steel toe cap moulded pvc to protect against oil acid and alkalie resistance confirming to is 15298 part - ii (size-8/9/10 inch) , barrication tape (6 inch) 250 mtr roll made out of pe/pp film with work in progress printed on both sides as per ansi z53 5.5 , chemical goggles with indirect ventilation made of pvc frame and fitted with polycarbonate lengths and non allergic elestic band confirming to en 160 , acid/ alkali proof gloves having size of 18 inch with palm m , normal dangari (size-l) with having an is-11612 are made of various fabrics like treated cotton , fire proof dangari (size-l) having is-11612 are made of inherent fire retardent fabrics , safety helmet made up of thermoplastic polymer with inside eight point textle/nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- white , safety helmet made up of thermoplastic polymer with inside eight point textle/ nylon harness with sliding adjustment with chin strap and rachet confirm to is-2925:1984 colour :- green , impregnated granular activated carbon multi gas filter cartridge having is- 15323 :2003 , foot operated eye and face washer combination units are made of powder coated anti corossive gi pipes as per is 10592 , carry sheet (stretcher) l x b: 212 x 75 cm with self weight 1 kg, load limit 159 kg, lift type: horizontal , wind indicator made of light weight pu coated nylon material. double stitch at all joints. , plastic eyelets gives anticorrosion proper-ties. the complete wind sock comes with a polymer packing. 2" dia and 6 ft length along with wind indicator stand is made of good quality non corrosive galvanized iron (gi) pipe. , ear plugs corded epsav-570 , nose/ dust mask rpsav-p2 , flash light distance 243 mtr. run time:2 hr. 15 min. compliance: none, lumens. 164 , vapour respirator with head stripes to accommodate twin cartridges with exhalation valve , safety net consisting of pp rope dia: 4mm, mesh size: 100 mm, outer rope dia: 12mm supported by an additional nylon net (fish net), rope breaking strenght report should be as per is size 5mtr x 10 mtr , ear muffs, ce marked, made from impact proof polypropylene with multi position soft polymer head band. foldable compact size for storage. approved from en 352-2, snr 27 db(a) , heat shield hand gloves made of normal and tannedsplit leather of reddish-brown colour. , insulating thermalbarrier as inner layer gives heat protection upto 250 degrees. thumb re-inforcement enhances usage life. best for weldingtand general heat applications size 10 length 12.5", approved from en407-423x4x, en388-4344 , insulated hand gloves with working voltage of 17000 volts and proof voltage 25000 volts length of 14 inch, confirm to erda 4770:1991 , electrical hand gloves, for 2000 volts dc, coating material natural rubber latex, liner material non flocked, cuff style rolled beaded/gauntlet, grip design smeeth finish, confirm to erda 4770:1991 , hot oil splash suit, a five layer garment made of csm material, meta aramid, inherent cotton, aramid felt & inherent fr. the fabric withstanding pressure caacity is 50kg/cm2 and steam strength is up to 350c temperature.it should be atira tested for 250c splash, tested to iso 5025,9151,6942,9185 and en 1875-3 , chemical splash goggles with indirect ventilation, protect against splash and a hard-coated polycarbonate lens that reduces uvb and uva radiation from natural sunlight by 99%, approved from ansi z.87.1.2003 , chemical handling gloves, protect from acid alkali, sulfuric acid, size 18" as per en 374:2003 , elecrical shock proof helmet, material should be hdpe, weight should not be more than 325 gms design should be aerodynamic size is 520 to 600 mm, confirm to is 2925:1984 for head protection 30 kv , chemiflex latex gloves, length-300 mm, en si

Anticorrosive Treatment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors