Latest arm guard Tenders | Government arm guard Tenders

State Government

CTN :43511062

19 Jan, 2026 16.95 Lacs

Shivpuri - Madhya Pradesh

Tender For providing uniformed well trained armed guard and unarmed security guard for watch and ward and guage reader and sweeper for atal sagar madikheda dam

State Government

CTN :43467490

13 Jan, 2026 NA

Delhi - Delhi

Tender For s/i/t/c of e/m equipments and allied works for newly re-bored tube well at okhla vihar near majar in okhla constituency ac-54. - supply of submersible pump set fitted with dynamically balanced ss impeller mounted on stainless steel shaft with protection sleeve having stage bowl & closed grained shorted type impeller, the pump will be directly coupled to required wet type induction motor of 7.5 hp, 15 stage, speed 2900 rpm suitable for operation of 3 phase, 415 volt, 50 hz, ac supply with efficiency 70% at following duty point: 200-125-75 lpm on 89-124-133 mtr. head.having discharge outlet 50 mm and outside dia 142 mm.make: bs/skope/ any djb approved. , supply of hut type electrical feeder pillar / fabricated with 50 x 50 x 6mm angle iron and 16 swg ms sheet with horizontal and vertical intermediate member of suitable size. i.e. 1370 mm x 760mm x 460 mm. with arrangement for mounting of switchgear and electrical energy meter i.c. painting heaving following item fitted. a) mccb 63 amp, 4pole, 415volt, 35 ka -1 no. b) rccb 63 amp, 4pole with earth fault indication protecting a circuit automatically in the event of earth leakage sensitivity 100ma, - 1 no c) fully automatic star delta starter of relay range 13-21 amp. (7.5 hp to 10 hp) 3 phase oil immersed type -1 no.d) ampere 96 x 96 mm. square shape 0-30 amp-1 no. e) voltmeter 96 x 96 mm. square shape 0-500 volt-1 no.e) indicating lamp (a set of 3 lamps) 1.setf) shunt capacitor of 10 kvar mpp type with three phase isolator with suitable banking g) motor protection assembly with earth leakage protection phase sequence corrector, single phasing, protection, overload protection, high voltage / low voltage protection time delay power on, programmable time switch i.c. r&b phase facility to change over from automatic, to manual &vice verse for up to 10 h.p -01 nos.complete wiring &installation of above accessories with required copper conductor wire and thimble etc. 01 job.make of all components: any djb approved., s/o pvc insulated and pvc sheathed cable with plain copper conductor having 3 phases, 3 core flat for submersible motor of 4 square mm size each 100 mtrs. make:grandlay / havells./any djb approved make, s/o m.s. clamp of 600 mm length duly fabricated out of 12.5 mm thick 75 mm wide, m.s. plate for holding the pipe of 50 mm dia., s/o double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends with slot of submersible cable. make: tata/ jindal./any djb approved make, s/o/ tail piece of the medium class gi pipe 500 mm long with one end threaded as per outlet of pump & another end flanged as per size of gi pipe 50 mm dia., s/o gi 90 bend of size 50 mm dia having both side flange (heavy duty)., supply of ms nut bolts off size as per requirement., s/o rubber packing for 50 mm dia flange., fabrication and supply supply of bore cover approx size 1x1 made out from 6mm thick m.s. sheet in 2 halves and a circular hole in centre 3-1/2 dia. with locking arrangement by nuts and bolt. , earthing with g.i. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., installation of t/well by lowering of sub p/set with all allied above items. this includes installation and grouting of panel boards with all electrical wiring & cabling at site. all tools & tackles i/c. tripod chain pulley blocks etc. shall be arranged by the firm. this includes testing & commissioning of t/well on load at site i/c. cartage, loading & unloading of material. it also includes a trial run of 30 hrs operation successfully by the firm. all required civil work included in the scope of work.

Central Government/Public Sector

CTN :43485645

28 Jan, 2026 2.70 Crore

Uttarpara - West Bengal

Tender For providing of cash in transit service - 3000; cash custodian/loader, armed guards; preferaby ex servicemen/ pmf/armed police; air conditioned; 4; 2

CTN :43428279

24 Jan, 2026 NA

Delhi - Delhi

Tender For procurement of riot control equipment - foldable baton, shield polycarbonate ballistic, shield polycarbonate non ballistic, canister for gas mask, helmet with visor and wire mesh/grill, body protection front & back with shoulder cover, elbow pad with arm guard, knee cap with shin guard

Central Government/Public Sector

CTN :43370219

14 Jan, 2026 7.51 Lacs

Lakhimpur - Assam

Tender For corrigendum : supply of 5 kva online ups , battery bank for ups 26ah 12v , ats switch for ups , battery bank rack for ups batteries , class c or type ii single phase surge protection device , float cum boost charger 24 volt 30 ampere , battery bank for vhf radios 150 ah 12v , battery bank rack for vhf radios , ac power cable , 16 a socket , modular board , 16 a switch , mcb , pvc pipe for laying power ac cable along with wall clamps , miscellaneous item , supply installation testing and commissioning of item 1 to 15 above and training

Central Government And Public Sector

CTN :43018274

13 Jan, 2026 5.64 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : supply of purchase of spare parts for fire protection system c c--hooter 220v dc, l 125mm, b 125mm , hooter 24v dc, l 125mm, b 125mm , push button 10a 415v ac , 1a 250v dc , 1noplus1nc with element switch , selector switch 16a 250v ac, 2 way on and off , heat detector, 5a 125v ac, 0. 5a 125v dc, setting at 175degreef for opus , heat detector, 5a 125v ac, 0. 5a 125v dc, setting at 190degreef for cable tunnel , 90 degree gi elbow 3 way, 1by2inch bsp, type-heavy duty , 1by2inch ball valve ss, heavy duty, suitable for pressure upto 10kgby cm square , 1by2inch x 1by2inch bsp male female connector, gi material, typeheavy duty , 1by2inch bsp gi tee, type-heavy duty , 1by2inch bsp gi socket, type-heavy duty , 1by4inch bsp thread brass flare male , 3by8inch copper tube , 3by8inch brass nut for copper tube, suitable for item no. 13 , 3by16inch brass screw for deluge valve, length 12mm 100 per packet , 16mm dia. stud, length 200mm with 2 nuts , butterfly valve 4 inch with suitable ms flange , water pressure gauge with mounting for deluge valve 10kgbycm square pressure , water motor gong, suitable for pressure upto 5 kgbycm square, with 1by2inch to 3by 4inch male - male thread adaptor hex nipple of ss , glass for hydrant panel, w 570mm, h 650mm, 5mm thick , glass for hydrant panel, w 240mm, h 420mm, 5mm thick , glass cutter suitable for cutting 5mm thick glass , gasketby rubber beading for glass of hydrant panel, one inch thick , pin type panel key for hydrant panel , qbd bulbs for detection line, bursting temp plus79 degree celcius plus175degreef, dia 1by2 inch , emergency push button, 10a, dia 22mm , toggle switch, 2 way, 2 pole, 10a , 220v dc brass solenoid valve of 1by2 inch dia, suitable for airbywater of 10kgbycm square pressure, normally closed type , hose pipe with nozzle 38mmx 30 mtr for fire protection system ) /bid number: gem/2025/b/6935559 * /dated: 02-12-2025 & & / bid document1 / 23

CTN :43290565

13 Jan, 2026 5.98 Crore

Delhi - Delhi

Tender For corrigendum : supply of mats 98 pcs as per international norms and standard , score board manual , white belt , blue belt , bell , dummy , mats set of 272 pcs as per international norms and standards , electronic 30 second device , mats 1 set of 100 pcs as per international norms and standard , chest guard different sizes , head guard red blue different sizes , hand gloves red and blue different sizes , shin and instep guard red and blue different size , abdo guard boys and girls , punching bag , punching pad , flags , mats 8mtr x 8mtr as per international norms and standard , gloves 8 oz , gloves 10 oz , head guard , shin guard , poles , kho kho mat 600 sq mts as per international norms and standard , kho kho substitution board , mats 98 pcs as per international norms and standard , mats complete set as per international norms standard , chest guard size number 1 2 3 4 , head guard size small mediumlarge , shin guard size small medium large , arm guard size small medium large , hand gloves size small medium large , foot guard , irani pad , fan pad , kicking pad , taekwondo shoes , abdominal guard male female different sizes , gum shield , pss and electronic equipments , breaking tiles , mats 12mtr x 12mtr as per international norms and standard , cheeba , chingoi , chest guard , leg guard , elbow guards , mats with cover and velcro as per international norms and standards , mat cover with velcro , dummy 20kg approx , dummy 30kg approx , dummy 40kg approx , wrestling indicator ) /bid number: gem/2025/b/6940948 * /dated: 22-12-2025 & & / bid document1 / 47

CTN :43205945

13 Jan, 2026 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of make- ird mechanalysis limited , ird544m - vibration sensor , inductive velocity , top exit , mil 2-pin connector , 42.52mv/mm/s , 10 hz - 1 khz sku - m97120 , make- ird mechanalysis limited , stud for vibration sensor item no 1 , mounting/grub screws , 1/4 inch-28unf male , m6 x 1 male sku - stud-m6 provides connection between vibration sensor and mounting pad , m/s ird mechanalysis limited , vibration sensor mounting pad mild steel blackodized for ird544m (60x60x16 mm) with m6 thread for item no 1 tapped sku - ms-pad-ird544m , make- m/s ird mechanalysis limited , vibration sensor cable assembly for item no 1 , signal cable teflon 3.5mm dia , ss conduit 5mm id , 15 meter length straight , 2 pin ms , shielded , spade lugs at free end sku - m601015spade lugs at free end carry following colour code- red core- signal live , black core- signal ground , green core- signal shield , make- ird mechanalysis limited , eddy current pickup set comprising of probe , driver and connecting cable for 9 meter system. constituents. , make- m/s ird mechanalysis limited ird8800 rack , 8 position , 5u sku - m88008 this is the bin and will accomodate ird8800 cards , make- ird mechanalysis limited ird8800 (8800) , m88250 (88250) casing vibration module , 2ch velometer input (mv /mm/sec) and 1ch key phasor input , api standard 670 compliant sku - m88250-dc ird8800 series module m88250 can work with all types of velocity output vibration sensors that provide mv/mm/sec output - like ird531 (4 mv/mm/sec) and ird544m (42.52 mv/mm /sec) , make- m/s ird mechanalysis limited , ird8800 (8800) , m88900 (88900) - speed module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc , sku - m88900-dc , input- accelerometer and/or velometer , outputs-4-20 ma dc output proportional to full scale vibration rs-485 modbus rtu/tcp-ip output buffered output alarm relay contacts trip relay contacts full scale , alarm , trip , units , sensitivity and other parameters are programmable and password protected , make- ird mechanalysis limited , ird8800 (8800) , m88600 (88600) - eccentricity module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc , sku - m88600-dc input- accelerometer and/or velometer , outputs-4-20 ma dc output proportional to full scale vibration rs-485 modbus rtu/tcpip output buffered output alarm relay contacts trip relay contacts full scale , alarm , trip , units , sensitivity and other parameters are programmable and password protected , make- ird mechanalysis limited , 35 mm din rail mount industrial grade power supply , 480 w , product- rps480 , 24 v dc output , dimension- 60 x 154 x 158.55 mm (w x h x d) , weight- 1050 gms , sku - rps480-24-ce supports 90 - 264 vac / 127 - 370 vdc power factor more than 0.95 full load over entire input range protection against short circuit , overload , overvoltage & over temperature cooling by free air convection ul 508 approved (e522848) efficiencies up to 93 % dc ok relay contact , make- ird mechanalysis limited , cabinet 1500 x 600 x 600 in mm , ip32 sku - cabinet-1500-600-600-ip32 , installation commissioning and calibration check of all supply sensor with unit at site

CTN :43436518

19 Jan, 2026 NA

Aurangabad-Mh - Maharashtra

Tender For supply of supply installation commissioning of sports item : -boxing gloves 10 to12 oz , cotton hand wraps grip 4. 55m , boxing leather pads , punching bag immortal super leather 40kg, hight 120cm , punching bag dia 39cm, length 150cm , leather speed bag with swivel , upgo freestanding punching bag 70 in 205lbs. , polyester and mesh fabric boxing short and vest , boxing short and vest red blue , skipping rope 366cm , match shoes s. m. l. xl size , gum shield , head gear s. m. l red blue , archery wooden bow regular size , wooden bow small size , compound bow gen x , archery cane arrow wooden , carbon archery arrow 30 31 inch 100 , target board 4x4 feet , target stand wooden still , archery colour target faces 40 cm , four in one archery targets face , bow stand , arm guards , finger gloves , compound puller , bow maintenance accessories each bow , arrow quiver , wrestling jersey red and blue , langot , match shoes s. l. m. xl , mugdar 1. 5 to 2 kg , climbing rope 20 fit , kabaddi taekwondo karate kho-kho mat usi interlock eva foam red blue 35 mm. 1x1 mtr.

CTN :43430929

11 Jan, 2026 30.06 Lacs

Multi City - Multi State

Tender For maintenance of electrical installation and fans in non residential building in sch a president estate rashtrapati bhavan new delhisubwork/packages:replacement of outlived washer extractor and other laundry equipments at army guard area

Arm Guard Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector