Latest arm insulator Tenders | Government arm insulator Tenders

CTN :41540143

08 Sep, 2025 NA

Bathinda - Punjab

Tender For corrigendum : supply of panel control genr set alternating,insulation tape elec,pnp transistor 2n2222,oil linseed raw,lens cleaning tissue,gas nitrogen

Central Government/Public Sector

CTN :41381856

11 Sep, 2025 11.00 Crore

Ernakulam - Kerala

Tender For corrigendum : custom bid for services - habitability package for jur sagar kiran; 1 5.1 wooden panel flooring, 2 5.1.1, 1)supply &replacement of wooden panel flooring for jr. & sr., recreation room, executive room, auditorium, t/p room, radio room,, control room, engg. office & t/p office.specification: wooden plank (2 m, x 305 mm x 75 mm thk), type of wood: balau timber, sq.ft. 2600, 3 5.2 flooring, 4, 5.2.1, 1)supply &replacement of vinyl flooring for a,b,c,o decks,including, messes and staircase with teak wood running skirting 150mm width,6mm, thick on all room walls,stair cases,offices,control rooms and scr room., specification:thickness of 2mm or more,fire resistant,non slippery,, washable,wooden finish., 2)quantity is indicative and will be finally calculated based on the, damages assessed at the time of dry dock., 3)as a turnkey job, bidder to carryout all associated job including renewal, of damaged deck composotion., make:armstrong/hanwa/flora or as approved by ongc., sq.ft. 15000, 5, 4) material to be approved by ongc., 5) primary deck covering should be of approved material which will not, give rise to toxic or explosive hazards elevated temperatures*. (refer to, imo res. a.687(17) - fire test procedures for ignitability of primary deck, coverings), 6 5.3 lining panels 'c' class, 7 5.3.1, 1) supply & replacement of abs approved (solas) lining panels (12, mm thick) for a, b, c, 0, decks, including canteen and staircase, 2) job includes supply of all supports, galvanised steel profile with metal, inserts, frames, anchors, clamps, fasteners, glasswool insulation,, washers, mesh, retailer clips, cloth pops etc. as per the existing system., 3) make: marino/royal touch/century/greenlam/royal challenge/sundex, or as aproved by ongc., 4). material to get approval from ongc., sq.ft. 15000, 8 5.3.1, glass wool insulation should be of 4 inches thickness (high density, block), fire resistant and suitable for accommodation ceilings of drilling, rigs., sq.ft. 15000, 9 6.75 remove & refit of sensors & bell router of fire alarm system from ceiling, panels of a,b,c,o decks of accomodation area nos 220, 10 6.61 remove & refit of paga system from ceiling panel of of a,b,c,o decks of, accomodation area nos 140, 11 5.4 partition / lining panels 'b' class, 12 5.4.1, 1) supply & replacement of abs approved partition / lining panels (22, mm.) at various locations of accommodation, 2) job includes supply of all supports, galvanised steel profile with metal, inserts, frames, anchors, clamps, fasteners, glasswool insulation,, washers, mesh, retailer clips, cloth pops etc. as per the existing system. ., 3) make: marino/royal touch/century/greenlam/royal challenge/sundex, or as aproved by ongc. 4). material to get approval from ongc., sq.ft. 15000, 13 5.4.1 glass wool insulation should be of 4 inches thickness high density block,, fire resistant and suitable for offshore drilling rigs. sq.ft. 15000, 14 5.5 shoe racks, 15 5.5.1, 1) supply of ready made shoe racks to be made in both 'a', and 'b', decks at exit points on port & starboard sides as per following:, a) shoe rack for 'b' deck: size 4' x 1-1/2' x 1-1/2', b) shoe rack for ''a' deck: size 6' x 1-1/2' x 1-1/2'., 2) makes: 1.guatier, 2. durian, 3. concepts, mumbai, 4. godrej or as, approved by ongc., set 2, 16 5.6 new flooring at freezer room & cooler room, 17, 5.6.1, 1) to provide new flooring for freezer room and cooler room with, thermal insulation to avoid heat loss including supply of materials as per, details given below:, a) room volume - 22.4 m3,, b) ceiling area - 12.4 m2, temp. -20c,, c) floor area - 12.4 m2,, d) sidewalls - 13 m2 x 12.8 m2 x10.7 m2x12.5 m2., e) rubber mats - 12 mm thick synthetic rubber, 2) supply and fixing of anti-skid floor tiles in both the rooms., (makes nitco, johnson, spartek, sonora, kajaria), 3) supply and fixing of thermal insulation including materials for all side, walls and ceilings of both the rooms as per

Central Government/Public Sector

CTN :41649734

15 Sep, 2025 NA

Vizianagaram - Andhra Pradesh

Tender For supply of supply of ups batteries and other electrical items d d - batteries 100 ah 12 v , 4 pole 63 amp isolator , 20 amp ac metal tops , bearing 6201 zz , bulb screw type 40 w , bulb 60 w , capacitors 2.5 mfd , pvc insulation tape roles , led bulb 7 w , pvc pipe 1 inch , pvc wire 1 18 , wet rubber , mcb single pole 20 a , plastic wire heavy , rust free spray , capacitor 3 phase 2 kvar 440 v jelly type , geyser element 2 kw 250 v triangular type t pocket , led drivers 100 w model sodvexc4-100w-700 , spd power control 5a 10 kv 440 v , led deskmet table lamps for study , led tube light set batten type 22 w , led bulbs 9w , 33 kv electrical gloves white , switch combined socket 6a 250 v with junction box , mcb single pole 6a , mcb single pole 10 a , digital timer switch , 4 pole 63 amps mcb , led night lamps , led drivers 50w input 100-265 v output 23-43 v 1500 ma , led driver model yh1216-90w pf 0.9 , white petroleum jelly

Central Government/Public Sector

CTN :41531880

25 Sep, 2025 NA

Hubli - Karnataka

Tender For corrigendum : supply of porcelain stay arm insulator [ri 6000-2]

CTN :39481967

30 Sep, 2025 NA

Dehradun - Uttarakhand

Tender For corrigendum : supply of veterinary instruments and equipments - allis tissue forceps (20 cm.), artery forceps curved (15 cm ), artery forceps straight (15 cm ), forceps s.s. (20 cm), forceps s.s.(15 cm), haemostat straight s.s.(17.5 cm), haemostate curved s.s. (15 cm. ), mayo s scissors curved isi (s.s. 15cm), mayo s scissors straight isi (s.s. 15cm), scissors straight s.s.(12.5 cm), scissors straight s.s.( 17.5 cm), surgical gloves (standard), surgical mask (standard), suturing needle (assorted size) (traumatic/atraumatic cured/st.), suture thread silk/ nylon (10 mt. reel no.100, 0, 1, 2, 3), chromic cat gut (100, 0, 1, 2, 3 no.), needle holder s.s.(15cm), instrument trolly, dressing drum s.s. round 20 gauge (height 30cmx30cm dia.), b.p. blades (no. 22, 23, 24, 11, 12, 13,14, 16, b.p. handle s.s.(no. 3 ), b.p. handle s.s.(no. 4), kidney tray s.s.(15 cm length), tray small ss (250mmx300mm), hypodermic needle (15 x3/4"), hypodermic needle (18 x3/4"), vaccutainer with needle (with vacuum, 10 ml and needle of double bewell 16 no.), electrcally operated needle and syringe destroyer. destruction rate max. 1 minute per needle of 1.6 mm thickness with 80 mm length. min. 350 cutted hubs of syringes with needle burnt residue., bloodless castrator for small animals 9 (made of special high carbon steel coated for protection against rust formation), castrator imported, i/v fluid stand (s.s.), intra venous set (disposable 0 standard) ), scalp vein set (21 no. 0 22 no.), electric dehorner (30 cm length), trocar canula for sheep s.s.(15 cm), teat syphon (ss), drenching bottle (large) (metal 500 m), drenching bottle (small) (metal 200 ml), doctor coat tericot (free size), plastic apron, macentosh sheet (double colour), rubber arm sleeves with latex gloves (no. 9), gum boot, dog muzzle (assorted size), dog nail cutter (standard), measuring cylinders (50 ml graduated borosil glass ), measuring cylinders of (100 ml graduated borsil glass ), medicine carry bag (nylon 600 dpu coated padded, multipocket for medicine and surgical equipments ), jar with lid ss (2 kg. capacity), jug ss (2 ltr. cap.), thermos s.s. double insulated (1 ltr. cap., 30cm length, 7.5cm mouth dia with soulder carrying strap.), bucket ss (12 ltr capacity), california mastitis kit, centrifuge machine (bench top) for general purpose, canopy tent with carrying bag. frame made of steel powder coated pipe (23 gauge) 0 tetron cover (waterproof) with two folding chairs and one folding table, vaccine carrier (1.6 lit capacity with 4 ice packs), microscope binocular, autoclave electric, calf puller ss 316/304., animal catching device, cold boxes vaccine storage capacity 20 ltr. weight fully loaded 43.3 kg. empty weight 17.5 kg. external surface material plastic, internal lining material plastic , insulation material polyurathene, insulation thickness 110 mm,, refrigerator, thermocautery, veterinary urine analyzer with accessories, animal sling for large animals, cold cabinet/ cold room with 25% capacity of racks as deep freezer and 75 % as cold cabinet having 2-8 degree celcius temperature, digital display, alarm system for temp. beyond set point, hematology analyzer with accessories (three parts), semi automatic veterinary serum analyzer with accessories, verticle cold cabinets for vaccine storage, with storage temperature 2-8 degree celcius. temperature holding time atleast 12 hrs, at power failure. adjustable shelves., hot air oven, incubator, ice liner (ice lined refrigerator or freezer) compressor compartment0 hermetically sealed high quality compressor 230 v 50/60 hz. relatively noise less fan to cool down the compressor. all steel tubes protected with special compound against rust formation. 1 thermostate pre-stetted from the factory for 2 c - 8 . control panel situated at the front of the unit. light indicators for different functions, 1 digital thermometer to indicate the internal temperature, latest cooling system. insulation with thick polyurethane foam. foaming agent- cyclo

CTN :41042526

09 Sep, 2025 14.03 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of lt miscellaneous items for lt switchgear lt system for the year 2024-25 unit 5 and 6 csctpp chhabra - air flow sensor sl0101, control supply -230v ac, with 1 no +1nc contact, make-ifm or equivalent, dynamic braking resistor 13 ohms/ 9600w, 10% ed, 10 sec. max, ambient 50 degree,make-iresco/equi or equivalent, fan: axial, dia: 250, 230vac, 50hz, 115w, air flow:1610 m3/h (specification attached at annexure-i), fan: axial, dia: 450, 415 vac, 50hz,480 w, air flow:4530 m3/h,speed-1360 rpm,(specification attached at annexure-ii), fan axial 08" ball bring 230v ac 1p-50hz (as per annexure-iii ), relay assly : 4 relay, 2 c/o, 5a/24v dc, with led indication, iron core reactor 3 phase, 0.359mh/45a, 3 ph iron core, 117 uh/240a, make: rishab/ transformer/epi/equi or equivalent, 3 ph iron core, 67 uh/240a, make:rishab/ transformer/epi/equi or equivalent, 3 phase line choke ,in-21 amp,inductance-4.2mh,class-f,freq-50hz,voltage-415v, 3 phase line choke ,in-21 amp,impedance-3%,class-f,freq-50hz,voltage-415v, ct: metering 250/5a, 15va, class 1, ct dim.: 180{w}, 100{d}, 70{h}, window size:20x35mm, front terminals, resin, cast, insulation class:e, type 2, colour:yellow, resin cast insulaed c.t 400/5a,class-1,va-10, resin cast insulaed c.t 400/1a,class-1,va-10, thermal overload relay range 95-120 a, 125hp three phase submersible pump star delta starter with 3-position selector switch (with auto switch), single phase preventer, current overload protection with short circuit protection., aluminium ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, 35 sq.mm, 50 sq.mm, 70 sq.mm, 95 sq.mm, 120 sq.mm, 150 sq.mm, 185 sq.mm, aluminium pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 10 sq.mm, 16 sq.mm, 35 sq.mm, copper ring type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, power terminals mounting on din conforming iec 60947-7-1,voltage rating-1 kv,safe for fingers., current rating-140 a, 35 sq.mm,3 nm, current rating-192 a, 70 sq.mm,6 nm, current rating-232 a, 95 sq.mm,6 nm, copper pin type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 1.5 sq.mm(hollow type), 2.5 sq.mm, 2.5 sq.mm(hollow type), 6 sq.mm, 10 sq.mm, 16 sq.mm, 25 sq.mm, copper u type terminal lugs conforming to is-8337/is-5082 ,iec-61238,for voltage rating 1.1 kv, 1.5 sq.mm, 2.5 sq.mm, 6 sq.mm, terminals blocks (melamine housing) khaki color, 4 sq. mm, 32 amp., 600v, 10-20awg, screw type, din mounting, 6 sq. mm, 41 amp., 800v, 08-20awg, screw type, din mounting, 6-35 sq. mm, 125 amp., 750v, screw type, din mounting, 1.5-4sq. mm, 32 amp., 800v, 08-20awg, stud type, bolt connection, clip on din mounting, 35-50sq. mm, 125 amp., 1000v, clip on din mounting, wago make grey colour screwless , spring clamp, polyamide terminals for interpanel wiring , terminal:769-251, female plug:769-102 with add-on, modular timing relay,5a,2co,0.1s 100h,on-delay,230v ac, voltage-transducer, suitable for 24v dc power supply,i/p:0-500v ac,dual o/p(4-20ma), din rail mounted,, shunt resistor, 750a/60mv,0-60mv, shunt resistor, 175a/60mv,0-60mv, shunt resistor, 200a/60mv , 0-60mv, thermal overload relay,1.6a-2.5a, 3 pole, bi - metallic, 1 no + nc,, thermal overload relay,16a-25a, 3 pole, bi - metallic, 1 no + nc,, ac axial fan230 vac,50/60 hz 6"172x150x51 mm(model no rec-21725b2w) rexnord make or equivalent for 1:1 replacement, ac axial fan230 vac,50/60 hz 4"120x120x38 mm(model no rec-22038 a2t) rexnord make or equivalent for 1:1 replacement, transformer protection relay,i/p-4 nos of rtd sensors(pt-100),3 no of set points,0-300 temperature indication range,o/p-four relay contacts(01 c/o contacts),one analog 4-20 ma output contacts ,aux supply -90-270 v ac/dc,pecon make ,model no-tr-7570 or equivalent for 1:1 replacement, add-on auxilia

State Government

CTN :41154111

11 Sep, 2025 6.00 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : purchase of various spares of window/ split air conditioners stps, mppgcl sarni - compressor (without gas)make : godrej/lg/voltas/bluestar/hitachi only , 1.5 ton, 2.0 ton, heavy good quality empty 60kg gas cylinder suitable for refilling of r-22 refrigerant gas, supply of refrigerant gas r-22 make: godrej/totaline , capacitor suitable for 1.5/ 2 ton a/cmake: totaline/epcosh/usha/hevalls only, 50 f, 60 f, pcb (printed circuit board) universal air control system with coupler for coupled to swing motor., set of copper made cooling pipe including with nitric rubber insulation, 4 core, 2.5 sq. mm copper conductor round flexible white and drain pipe. make : totaline/ godrej , thermostat suitable for 1.5 / 2 ton split / window a/c make : godrej/totaline only, indoor unit thermostat, outdoor unit thermostat, condenser motor suitable formake : godrej/lg/voltas/bluestar, 1.5 ton, 2.0 ton, indoor motor suitable formake : godrej/lg/voltas/bluestar, 1.5 ton, 2.0 ton, condenser fan blade suitable for, 1.5 ton, 2.0 ton, indoor blower suitable for, 1.5 ton, 2.0 ton, single phase contactor suitable for 1.5 / 2 ton split / window a/c.make: l&t/ siemens/ c& s, dead nut (flare nut) brass made.size : & = 1 set, flexible drain pipe (used in inner body in a/c), copper condenser coil suitable for, 1.5 ton, 2.0 ton

Central Government/Public Sector

CTN :41589119

16 Sep, 2025 3.34 Lacs

Angul - Odisha

Tender For supply of pvc flat cable, copper conductor with pvc insulation and sheath as per is 694 (q3) , control cable (q3)

State Government

CTN :41562292

05 Sep, 2025 NA

Karur - Tamil Nadu

Tender For installation, testing and commissioning of electrical equipments at chp area of rsps2 in tnpl unit i - ht switch board installation, testing and commissioning of the following ht switchgears including the final preparation of foundation, and transporting from employers stores or any other storage area (inside mill) to the place of installation, positioning in place, site assembly of loosely furnished accessories, 11 kv single bus bar board (1 vertical size 800x1500x2400) at + 0.0 m lvl, transformers installation, testing and commissioning including oil filtration & testing of the following transformer, including the final preparation of foundation, and transporting from employers stores or any other storage area (inside mill) to the place of installation, positioning in place, site assembly of loosely furnished accessories. transformer oil to be tested at nabl lab and report to be submitted to tnpl., transformer 2.5mva, 11/0.433kv at + 0.0 m lvl, low voltage power & motor control centersinstallation, testing and commissioning of the following lv pccs including the final preparation of foundation, and transporting from employers stores or any other storage area (inside mill) to the place of installation, positioning in place, site assembly of loosely furnished accessories, chp pcc (panel size 5700x1360x2375 - multisection) at + 6.00 m lvl, chp mcc-1 (panel size 10800x1120x2375 - multisection) at + 6.00 m lvl, chp mcc-2 (panel size 10800x1120x2375 - multisection) at + 6.00 m lvl, chp mcc-3 (panel size 6000x1120x2375 - multisection) at + 6.00 m lvl, mldbs / acdbs/changeover panel, chp acdb (panel size 3120x560x2375 - multisection) at + 6.00 m lvl, chp mldb (panel size 3120x560x2375 - multisection) at + 6.00 m lvl, installation of miscellaneous panels, panels upto 50 kg, panels 51 to 100 kg, panels 101 to 500 kg, panels 501 to 1000 kg, installation of push button stations/ control stations, installation and commissioning of ordinary, lockable type, emergency stop or start/stop pushbutton stations to be located near the equipments on steel supports, excluding supply of steel structural supports, cable terminations, earthing., welding sockets, installation, connection, testing and commissioning of thermoplastic polycarbonate 63a tpn with elcb-30 ma + 16a sp with elcb-30 ma industrial type sockets excluding cable termination. (box size 700x400x360mm), installation, connection, testing and commissioning of weather-proof metal clad 20a spn industrial type sockets excluding cable termination., cables, laying, dressing and clamping in trays/walls/ceiling/trenchesvertical laying of the following cables in ready trays, pulling through pipe and fixing of cable tags (aluminium strip number tags), fixing of gi saddles, saddle bars for cable clamping, clamp trays shall be tied by means of nylon ties etc, transportation of cables from employers stores or cable yard or any other storage area (inside mill) to respective plant area , 11 kv xlpe aluminium armoured cables3cx300 sq.mm al. ar. ue xlpe 11kv ht cable (round wire armoured), 1.1 kv, 3c/3.5c/4c xlpe/pvc aluminium/copper armoured/ unarmoured power cables, laying of cables up to 2.5 sq.mm, laying of cables from 6 to 16 sq.mm, laying of cables from 35 to 50 sq.mm, laying of cables from 70 to 120 sq.mm, laying of cables from 150 to 185 sq.mm, laying of cables from 240 to 300 sq.mm, 1.1 kv pvc copper control cables, laying of cable - 12 c x 1.5 sq.mm, end terminations for 11 kv power cablesend terminations for 11 kv xlpe power cables including cutting, stripping of cable insulation, providing compression type terminals, crimping on to the cable and then connecting it ( end termination kit will be supplied by tnpl), 3cx300 sq.mm al. ar. ue xlpe 11kv ht cable (round wire armoured), end terminations for lt power cablestermination of cables and connection of leads for 1.1 kv and lt cables including supply of termination accessories like double compression type brass cable glands, lugs, conn

Central Government/Public Sector

CTN :41576120

15 Sep, 2025 12.98 Lacs

Kharagpur - West Bengal

Tender For supply, installation, testing and commissioning of extra material for installation of unitary acs in different departments /centers/schools, office etc. at iit kharagpur, kharagpur (phase i). - "supply, installation, testing and commissioning including vaccumization and nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for split ac system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with xple class-o tubular insulation/with class-o closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specifications etc. as required :note: wall opening and making good to the damages.", "6.4 mm (¼"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "9.5 mm (⅜"")dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "12.7 mm (½"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "15.86 mm ( ⅝"") dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", "19 mm (¾"")dia (od) (soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation", interconnection electrical copper cables from indoor , outdoor & electrical control panel complete with 4 core 2.5 sqmm copper frls insulated cable(isi marked) with cable tie & clamp etc as required., supply & installation m.s epoxy painted fabricated stand for different size condensing unit with vibration isolators, grouting, for complete platform type stand for outdoor unit having safety railing etc as per site requirement., supply & installation of upvc drain pipe (isi marked) with 6mm thick nitrile rubber insulation from idu - 25mm dia, 40 mm rigid upvc drain pipe (isi marked) with 6 mm thick nitrile rubber insulation complete with fittings, u traps etc. & as specified to the nearest toilet with required civil works & finishing the same., supply of r-22 gas for top up, supply of r-32 gas for top up, supply & installation of good quality wooden frame (2" x 2") thick required for window ac installation, supply & installation of 16amps plug top (isi marked), supply & installation of 100mm pvc trunking with snap on trunking (isi marked), "supplying and installing following size of perforated hot dipped galvanised iron cable tray with cover (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended fromthe ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.", 100 mm width x 50 mm depth x 1.6 mm thickness, 225 mm width x 50 mm depth x 1.6 mm thickness, 300 mm width x 50 mm depth x 1.6 mm thickness, installation, testing & commissioning of the window ,split acs ,cassette ac supplied by department. price shall be inclusive of installtion upto 3mtr of refrigerant pipe, drain pipe and cable., window acs, split acs, cassette acs, tower acs, reinstallation, lifting, shifting of existing ac units (split & window acs & cassette ac)., window acs, split acs, cassette acs, tower acs, dismantling of existing ac (split ac / window ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, dismantling of existing ac (cassette ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, dismantling of existing ac (tower ac) units including all copper pipes, drain pipes mounting surfaces, etc. complete and keeping the premises clear of all and shifting to rac work shop, buy-back of existing unserviceable ac (split ac / window ac/cassette ac) units(all type) including all copper pipes, drain pipes mounting surfaces, etc. complete. the item shall be quoted as negat

Arm Insulator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector