Latest armor plate Tenders | Government armor plate Tenders

Central Government/Public Sector

CTN :40884899

10 Jul, 2025 38.8 Thousand

Jamnagar - Gujarat

Tender For providing of repair and overhauling service - port and stbd navigation light base plate and door hinges perished due to aging. same needs to be fabricated and fitted as per the sample (mat: ms, qty: 02).

CTN :40812984

14 Jul, 2025 NA

Kamrup - Assam

Tender For supply of replacement and repair maint work of rpl no 05 and 10 c c - replacement of existing 04 x window transparent glass including aluminum frame of kitchen bainet of rpl no 05 of size 1 ft x 1 ft and thick 4 mm. , replacement of existing of toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 05 of size 2 ft and dia 3 inch. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 05 , replacement of 12 x ss hinges of engine cover of rpl no 05 as per existing specification. , repair and cleaning work of sbs and pbs radiator of rpl no 05 to be required. , supply and fixing of iron cover for sbs and pbs radiator of rpl no 05 of size 3 ft 4 inch x 3 ft and thick 1 mm inclusive all charges. , replacement of existing 02 x iron plate of out side of sbs and pbs toilet of rpl no 10 of size 1 ft x 6 ft and thick 6 mm. , replacement of existing toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 10 of size 2 ft and dia 3 inch inclusive all charges. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 10 , replacement of existing transparent glass of wheel house of size 41 inch x 18 inch 2 nos with aluminum frame and 63 inch x 18 inch 1 no and driver cabin. , repair maint of existing oil tank of davit of rpl no 10 to be required. , servicing and balancing remetalling of alternator shaft of aux engine to be required and replacement of pully of aux engine as per sample of rpl no 10 inclusive all charges. , replacement of existing bracket of sukhan shaft of pbs main engine of rpl no 10 as per existing specification. ) /bid number : gem/2025/b/6372018 * /dated: 22-06-2025 & & / bid document 1 / 14

CTN :40813063

14 Jul, 2025 NA

Kamrup - Assam

Tender For supply of replacement and repair maint work of rpl no 12 c c - replacement of existing 04 x hinges of ramp as per sample inclusive all charges , replacement of existing ms iron beam and garder of ramp of front side of size 20 ft and thick 15 mm , repair and maint of ramp winch balancing problem and handle problem of pbs and sbs , replacement of existing 04 x ms iron air wind pipe of both side of size 2 ft 5 inch and 2 mm thick , replacement of existing 01 x fire hydrant valve and 1 x outlet valve as per sample , replacement of existing roof ms plate of sbs of master cabin of size 15 ft x 2 ft 4 inch and 3 mm thick and including ceiling remove and refixing , replacement of existing ms plate of port side near main engine of size 4 ft 4 inch x 3 ft 6 inch and thick 6 mm inclusive all charges. , replacement of existing ms plate of driver cabin bathroom of size 8 ft 4 inch x 3 ft and thick 6 mm and replacement of tile of driver cabin bathroom of size 5 ft 4 inch x 3 ft , supply and fixing of pvc pipe line connection from water tank to both side or bathroom and offr bathroom with kitchen of size l 185 ft, half dia and and , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm , balancing, remetalling of existing sbs propeller fan with brass metal , replacement of rotary pump as per existing specification , replacement of existing 02 x transparent glasses of master cabin of size 24 inch x 18 inch and thick 3 mm inclusive all charges ) /bid number : gem/2025/b/6371738 * /dated: 22-06-2025 & & / bid document 1 / 13

CTN :40704199

04 Jul, 2025 NA

Tawang - Arunachal Pradesh

Tender For supply of for pvc casing and capping confirming to is 3419 part 3 havells finolex,polycab, natural white or equivalent , switch socket combination snow white multipurpose 2 in 1, 15 amp 230 volts make-anchor,ssk, cona , switch socket combination snow white 5 amp 230 volts make-anchor, ssk, cona , service bracket 40mm dia gi tubing medium grade 1.5 mtr long make-jindal,tata,kalinga , service cable pvc insulated aluminium conductor, 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed as per store list attached , ceiling rose three terminal snow white make- anchor, ssk,cona , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts rechargeable type make-havells,bajaj, philips,cropmtion , pvc flexible wire copper conductor multi stranded 0.0016 oblique 76 make-havells, finolex, plaza , pvc flexible conduit pipe 15 mm dia havells,finolex,polycab, natural white or equivalent , pvc round oblique square block make-polycab,supreme, finolex , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side. , ci earth pit cover of size 300 x 300 x 6 mm with angle iron frame of size 20x20mm, 3 mm thick with ms frame. , funnel fitted with 20 mm diameter gi pipe 1.5 m long. pipe make-jindal,tata, kalinga , gi wire 4 mm diameter for earthing. , charcoal , salt normal , air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal, tata, kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings, drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make-presto,polycab, finolex , cement 43 grade opc packed in hdpe bag each 50 kg wt conform to is 8112-1989 make-birla gold,ambuja, ultratech,acc ,jk, dalmia , coarse sand free from vegetation qty - 0.30 cum , coarse aggregate 20mm graded qty - 0.30 cum , coarse aggregate 40mm graded qty - 0.30 cum superstructure of gun repair shed of size 20.00 m x 10.00 m x 5.00 m height for gun repair shed under job no 2519 as per technical specification and drgs attached, distribution box 8 way, double door spn 240 volts copper bus bar and neutral link earthing stud conforming to is-13032 and is- 8623 double door type make-havells,legrand,l and t, mcb spn 240 volts 32 amps make-havells, l and t standard, mcb sp 6 to 32 amps make-havells, l and t, standard, pvc tape 19mm wide 5 m long make-steelgrip,anchor,kinjal, cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor of size 1.5 sqmm single core as per store list attached, cable pvc insulated electric cable heavy duty 1100 volts grade multi standerd copper conductor of size 2.5 sqmm single core as per store list attached, pvc casing capping 1 inch long medium grade snow white havells,finolex,polycab, natural white or equivalent, pvc casing capping 3 oblique 4 inch long medium grade snow white havells,finolex,polycab, natural white or equivalent, switch piano 5 amp 230 volts flush type one way snow white havells,finolex,polycab, natural //bid details 2 / 35

Central Government/Public Sector

CTN :40773560

09 Jul, 2025 20.00 Lacs

Poonch - Jammu And Kashmir

Tender For repair of furniture for units in aor of stn hq bg under ge 881 ews - almirah large steel fd-351,339, 1031, removing unsv shelves of almirah large steel and s&f new shelves made out of 1 mm thick ms sheet with suitable clips/brackets/gas welding (if any) complete all as specified and directed by engr-in-charge., removing unsv foot rest of almirah large steel and s&f of new foot rest made out of 1.6mm thick ms sheet with continuous gas welding complete all as specified and directed by engr-in -charge., removing unsv lock of almirah large steel and s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make godrej/harrison/link, removing of unserviceable handle of almirah large steel and s&f of new steel handle 150mm long with suitable steel nuts and bolts complete all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms round bar 10mm dia all as specified and directed by engineer-in-charge., removing of unserviceable key plate of almirah large steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coats of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel large throughout inside and outside complete with spray machine after properly smoothing the surface all as directed by engineer in-charge., almirah med steel (fd-243, 340, 1032), removing unsv shelves of almirah med steel, s&f of new shelves made out of 1 mm thick ms sheet with suitable clips/ brackets/gas welddng (any one) all as specified and directed by engr-in-charge., removing unsv foot rest of almirah med steel, s&f of new foot rest made out 1.6mm thick ms sheet with continuos gas welding all as spcified in and directed by engr-in-charge., removing unsv lock of almirah med steel, s&f of new lock of six lever with duplicate key with suitable nuts and bolts all as specified and directed by engr-in-charge. make - godrej/harrison/link, removing of unserviceable handle of almirah med steel, s&f of new steel handle 150mm long with suitable steel nuts and bolts all as specified and directed by engineer-in-charge., removing of unserviceable locking device of almirah large steel, s&f of new three way locking device (chakra/locking rod and locking cover) made out of ms bar round 10mm dia all as specified and directed by engineer-in- charge., removing of unservicable key plate of almirah med steel, s&f of new key plate all as specified and shown on drg., welding per 5 cm wherever necessary, all as specified and directed by engineer-in-charge., m & l for two coat of synthetic enamel paint (1st grade quality shade/colour shall be approved by engineer-in-charge) including denting and painting of almirah steel medium throughout insided outside complete with spray machine after proper smoothing the surface all as directed by engineer in-charge., locker bed side steel (fd-1029), removing of old unsv hasp and staples of locker bed side steel and s&f of new ms hasp and staples as specified in drg and approved by the engr- in- charge., removing of old unsv conduit pipe of locker bed side steel and s&f of new cp steel 16mm dia 22 guage conduit hanging pipe all as specified and directed by engineer-in- charge., removing of old unsv handle of locker bed side steel and s&f of new cp steel handle 150 mm long as approved by engineer-in- charge., removing of old unsv hinges of locker bed side steel and s&f of new ms hinges 75mm long as approved by engineer-in- charge., removing of old unsv foot rest of locker bed side steel and s&f new foot rest made out of 1.6 mm thick ms sheet with continuous gas w

CTN :40754446

09 Jul, 2025 NA

Jalpaiguri - West Bengal

Tender For supply of wiper blade , wiper blade rear 330 ms bcs , element air cleaner , brake shoe front , dual brake valve rep kit , set booster set repair kit , clutch cyl r kit , seating block , cover plate , speedometor head

Central Government/Public Sector

CTN :40746664

08 Jul, 2025 49.00 Lacs

Jammu - Jammu And Kashmir

Tender For periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifi

Armor Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector