Latest arthroscopy shaver system Tenders | Government arthroscopy shaver system Tenders

CTN :41136472

01 Aug, 2025 NA

Imphal - Manipur

Tender For bid to ras supply of coir mattress of size 1.83m x 0.9m x 75mm thick comprising of 50mm thick high density coir with hessian border pasted with 25mm , pedestal fan 400mm sweep , wall mounted fan 300mm sweep conforming to is , exhaust fan 300mm sweep conforming to is , triple layer hdpe water storage tank cylindrical vertical with closed top 1000 ltrs capacity conforming to is specification , hdpe tarpaulin 18 ft x 24 ft , mild steel door wire mesh weight not less than 2.20 kg per sqm , led batten surface 4 ft long 18w output 1600 lumens per watt with suitable powder coated frame end caps and connector , led bulb 18w 220-240 volt , app water proofing membrane 3 mm thick 1m wide 10 m long , hdpe tarpaulin 30 ft x 30 ft , security light fitting for 65 watt led , pvc insulated sheathed unarmoured cable 16sqmm 4 core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , change over switch 63 amp four pole , pvc insulated sheathed unarmoured cable 6sqmm twin core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , ordinary portland cement 43 grade in hdpe bags of 50kg each confirming to is 269-1976 , coarse sand dimapur sand conforming to is 383 -1978 , coarse aggregate crushed stone 20mm graded conforming to is 383-1979 , bricks sub class b old size best locally available minimum compressive strength 75 kg sqcm water absorption not more than 20 percentage , iron angle 10 ft long thick of size 50mmx50mmx3mm , self tapping screws with ppdm washer 50mm long , ms square pipe 1 inch x 1 inch thickness 5mm , ms square pipe 2 inch x 1 inch thickness 5mm , ms square pipe 2 inch x 2 inch thickness 5mm , ms square pipe 3 inch x 3 inch thickness 5mm , hdpe sand bags of size 14 inch x 36 inch weight not less than 60 gms , plywood commercial 18 19mm bwr 8 ft x 4 ft , plywood commercial bwr grade isi marked of size 8 ft x 4 ft x 12mm thick , synthetic enamel paint high gloss superiour quality white colour , synthetic enamel paint high gloss superiour quality green colour , synthetic enamel paint high gloss superiour quality black colour , synthetic enamel paint high gloss superiour quality red colour , synthetic enamel paint high gloss superiour quality blue colour , synthetic enamel paint high gloss superiour quality yellow colour , thinner , distemper oil emulsion acrylic distemper , painting brush 100mm standard quality , painting brush 75mm standard quality , cp cast copper alloy pillar cock 15mm bore , mcb 32 amp dp 240 volts , pvc insulated sheathed unarmoured cable 10sqmm twin core aluminium conductor isi marked with working voltage upto 1100 volt roll of 90 mtrs , non skid ceramic coloured tiles of size 600mm x 600mm x 9-10mm thick , metal cutter disc 6 inch dia , metal cutting disc 14 inch dia , welding rod pkt of 100 electrodes , mild steel corrugated galvanised cgi sheet 8 ft x 3 ft x 0.63 mm thick isi marked , mild steel corrugated galvanised cgi sheet 10 ft x 3 ft 0.63 mm thick isi marked , mild steel corrugated galvanised cgi sheet 12 ft x 3 ft 0.63 mm thick isi marked , ppgi ridge cover 1.5 ft wide 0.63mm thick , acrylic sheet 3mm thick for window panes 8 ft x 4 ft , four layer hdpe water storage tank cylindrical vertical with closed top 2000ltrs capacity conforming to is specification , hand gloves , puf gun machine , lead acid battery 12v 180ah //bid details 2 / 40

State Government

CTN :41209440

09 Aug, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of submersible pump 1.5 hp , submersible pump 2.0 hp , submersible pump 3.0 hp , control panel 1.5 to 2.0 hp , control panel 3.0 hp , pvc electric cable 2.5 sqm , pvc electric cable 4.0 sqm , empd gasket , electrical rotary hammer drill , electric angle grinder , hot air blower , cordless air blower , professional ratchet socket , industrial infrased thermometer , clamp multimeter , steel handle allen key set , industrial new t spanner , insulated screw driver tool set , cc10 240mm cable cutter , cc06 cable cutter , insulated combination plier , round nose plier , hacksaw blade frame 12 inch , title 24 , spanner set 23 pcs , ring spanner set 12 pcs , digital tester and line tester , measuring tape 25mm 10 meter , title 29 , sledge hammer with fibreglass handle , hammer 560grms and ballpin hammer 500gms , title 32 , rubber mechanic gloves , safety halmet with colour , multipurpose tool storage open mouth bag , safety goggles , heat shrink tubing kit , electronic wire ferrules , copper thimble ring brass , pvc electrical insulation tape 6.50m 60 pcs , shock observer electric safety shoes , portable gas blow lamp , 15mm rubber water proof tap , double acting air valve 50mm , double acting air valve 80mm , double acting air valve 100mm , pn 16 cast iron foot valve 80mm , pn 16 cast iron foot valve 100mm , pn 16 cast iron foot valve 125mm , pn 16 cast iron foot valve 150mm , 22mm thick 4 holded ms flange 80mm , 22mm thick 4-6 holded ms flange 100mm , 22mm thick 6 holded ms flange 125mm , 22mm thick 6-8 holded ms flange 150mm , 16 kg demolition hammer , angle hand grinder , cast iron nrv 80mm , cast iron nrv 100mm , cast iron nrv 125mm , cast iron nrv 150mm , mccb 400 amp ) /bid number : gem/2025/b/6494087 * /dated: 25-07-2025 & & / bid document 1 / 37

CTN :41227595

06 Aug, 2025 NA

Kinnaur - Himachal Pradesh

Tender For supply of 10 kl underground fol storage tank , columns square hollow steel , trusses trusses including gable , purlins rectangular hollow steel , roof sheet 0 point 60 mm thick pre-painted green coloured , ms plate 5 mm thick , ms angle iron , self tapping screw 4 inch , self tapping screw 3 inch , industrial fuel transfer pump , electric wire 2 point 50 sqmm , modular switch and socket combination 05 amp , lightning conductor for each asset made of copper tube , pvc pipe 110 mm dia , pvc flexible hose water pipe 20 mm dia , gi elbow 20 mm make , gi gate valve connector , gi socket 20 mm with thread , gi union 20 mm , fire extinguisher 50 kgs abc dry powder stored pressure type , cement bag 43 grade , sand coarse , crushed stone aggregate 20mm , crushed stone aggregate 40mm , hard core of broken stone aggregate , tmt steel bar 12mm dia , binding wire 20 gauge 0 point 9 mm annealed , pre cast pcc block , pan motor tasala 18 inch dia , showel with wooden handle , wire mess for seving sand 8 feet x 5 feet , trowels as per isi mark , water level pipe 4mm 15 mtr long , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , gum boot , hand gloves rubber , drilling machine portable , steel cutter circular saw , cutting blade 4 inch steel , cutting blade 14 inch steel , portable generator set 5 kva , welding rod , welding goggles , welding gloves , portable concrete pump

Central Government/Public Sector

CTN :41229329

12 Aug, 2025 50.00 Lacs

Jamnagar - Gujarat

Tender For supply of dental materials - acrylic bur , acrylic cold cure powder and liquid , acrylizer unit , adam s plier , adson tooth forcep long , air rotor hand piece cartridge , amalgam carrier , ball end clasp , base former , bcm 201 bone chip maker kit , beggs bracket bondable , bioactive synthetic bone graft putty , bis acrly composits , bite turbos , bondable buccal tube second molar mbt 022 , bondable buccal tubes , bone clamp , bone screws kit buccal shel r l 12c with driver , bone tack membrane fixation kit , boyel devis mouth gage , buccal shelf bone screws , buccal tube bondable mbt 0 22 upper lower single , bur holder , burnisher , calcium hydroxide paste , cast pouring vibrator , casting alloys dental casting alloys nickle crome for fpd , celluloid strip , cement carrier , ceramic eching gel , ceramic polishing kit , cheek rectrectors for intra oral photography , chiorhexidine mouth wash , chip blower , chrome cobalt dental casting alloy , co axial wire spool 0 point 0155 , coe pack , coil spring close , coil spring open , cold self cure powder , cold mould seal separating medium , composite material kit light cure blue bite , cotton holder , crimpable hooks , crocodile forceps , dappan glass , dental inlay pattern wax , dental mercury , dental stone plaster , denture polishing disk , denture polishing kit , depulping agent , desensitizing agent , diamond and holembec carver , die hardner , die stone type iv , disposable mirror and probe , dual cure resin cement , dycal , e chain , elastic rubber ring all size , elastomer protective tube , elastomeric ligature ties transperant , excavtor , fast setting calcium hydroxide , fiber optic hand piece , fiber optic hand piece cartridge , fibre post , fibre splint , flame diamond bur , flame ogival end diamond bur , flamp shape bur , flat end tapered bur , flat end tapered finishing bur , flat fissure bur , flouride gel , foam tray for topical fluride treatment , full acylic teeth set for complete denture , g primebond 7th generation bonding agent , gas torch , gigli saw , glass slab , green stick compound , gutta percha cutter , hard wax , heat cure liquid , heat cure powder , heat vacuum moulding machine , heister mouth opener , helioseal f plus , impression beading wax , impression boxing wax , intraoral ss mirror for photography , ipr kit with handpiece , irm cement , izc bone screws , kohler titanium bone mill , light cure resin , lingual buttons bondable , lingual buttons with chain , long needle diamond bur , maggils forcep , mandril for sand paper , marquis color coded probe , mbt 0 22 bondable buccal tubes set of 4 upper double and lower single , mbt bracket position gauze , medium spoon shape excavators , metal aspirating syringe , metal bracket kit , metal crown cutting , metal polishing disks , metapex , mouth gauge , mta carrier , mta putty , non eugenol impression paste , orthodontic bonding agent , othodontic mini impants and mini bone plates and bone screw , ossttell rfa , paper point 15 to 40 20 mm , pattern resin , pattern wax for cast partial denture , peakit 0 22 slot mbt with upper triple lower double buccal tube , pediatric rotary files , periodontal probe william s , pesso reamers no 1 to 6 , pet kit , phosphate bounded investment materials , plaster of paris dental grade , polishing brush dental , polishing buffs , polyether impression material , preformed molar band with buccal tube , pulp tester , pumice , reconstruction plate cutter , restorative bonding agent , ring less casting system silicon casting rings , ronger forceps , root tip pick double ended ehb 13 and 14 , rotation wadges , round bur no 10 , round condensor , round end tapered bur , round end tapered finishing bur , rubber base a silicon putty and light body , rubber base c silicon putty and light body , rubber cup for polishing , rubber dam kit , rubber dam sheet , sandpaper sheet , screw driver size 1 point 5 , screw driver size 2 , screw driver size 2 point 5 , screw holder size 1 point

CTN :41203469

25 Aug, 2025 1.50 Crore

West Tripura - Tripura

Tender For supply of different machineries - supply of different machineries., automatic knife sharpening paper cutting blade grinding machine machine size: --grinding length 1600 to 1800mm, grinding width 150/160mm.width of the machine table 200 plus mm, grinding motor 4to6kw, cast iron/welded modular construction, smooth/ss inner area to drain out the cooling water drainage, hardened and ground steel bands for main & side guides, easily exchangeable, cast iron table with t slots & clamps, cast iron swiveling table for bevel grinding in one setting swiveling 360 degrees. additional clamping sides with t slots & clamps, *grinding heads should be smooth to move on carriage ways of the bed, branded grinding motor should be used like siemens/abb/kirloskar etc.,mounted with electro coolant pump, accessories required.:a) herded grounded strip. one set., b) grinding stone., c) honing stones.d). stone desser.,e). spl. tools in any, 43 fully automatic heavy duty hydraulic paper cutting machine-- front table length 680 mm.,front table height 900 mm., minimum (hydraulic) clamp pressure 400 kg.,max. (hydraulic) clamp pressure 4000 kg., smallest cut without false clamp 25 mm., smallest cut with false clamp 25 mm., cutting width 1070 mm., clamp opening 130 mm., weight of the machine 2800 kg or above., back gauge speed (normal) 50 mm. per second., back gauge speed (exp) 200 mm. per second or above., operative power supply 350-500v3 phase., max power within 4.5 kw.,machine height within 1700 mm., operative temperature 10 to 55 degree., hydraulic valve and clutch, operative brake system., multi-layer photo electric safety., double stroke prevention/two hand cutting cycle switch., mechanical overload prevention., air table with 8.8 coating.,the machine should be supply with future provision to incorporate programming system od bear minimum expenses., back gauge positional accuracy 0.03 mm., servo motor driver back gauge mechanism., bhartiya cutter hammer makes control gear., perfect binder machine ----4four) clamp, production speed 2500 per hour., book block size, book width 100 to 270 mm., book length 150mm to 440 mm., book thickness 3 mm. to 50 mm., dimension and weight , length x width x height 3200 mm x 1400 mm x 1220 mm, weight - 2700 kg approx., power supply 415 v, 50 hz 3 phase., damper roller washing machine----machine size: 30 width, 70 length,36 height, machine operation:, forward/reverse switch, max roller replacement: 4(four), max roller size :60 , roller wash tray: stainless steel with m.s fabrication, p.s plate processor- dimension (l x w x h)-1170 x 1260 x 860 mm, plate size- 700 x 970mm, developer tank capacity-40 liters., electric voltage-220 volt., speed-300-600mm / min. automatic double side flip top palte exposure-exposing area -960 x 1200 mm, power supply -220 v single phase, exposure uniformity-85-95%, light source should be from bottom of the exposure machine, metal halide lamp with 3kw capacity with instant start, arrangement for exposing from both sides.

Trust

CTN :40939307

07 Aug, 2025 NA

Katra - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning and post warranty camc of medical equipments (group - v) - e-nit for machinery and equipments, apheresis machine, arthroscopy shaver system, oct machine, dental rvg sensor, ultrasonic cleaner

CTN :41166853

01 Aug, 2025 29.67 Lacs

Ludhiana - Punjab

Tender For estimate for procurement of equipments for establishment of new labs for vigilance wing of wrd punjab - digital compression testing machine, capacity 2000kn including 18% gst, electronic balance, capacity 10kg x 0.5g including 18% gst, electronic balance, capacity 20kg x 2g including 18% gst, sieve g.i. frame 30cm dia x 80mm including 18% gst, sieve g.i. frame 30cm dia x 63mm including 18% gst, sieve g.i. frame 30cm dia x 45mm including 18% gst, sieve g.i. frame 30cm dia x 31.5mm including 18% gst, sieve g.i. frame 30cm dia x 20mm including 18% gst, sieve g.i. frame 30cm dia x 16mm including 18% gst, sieve g.i. frame 30cm dia x 12.5mm including 18% gst, sieve g.i. frame 30cm dia x 10mm including 18% gst, sieve g.i. frame 30cm dia x 6.3mm including 18% gst, sieve g.i. frame 30cm dia x 4.75mm including 18% gst, sieve brass frame 20cm dia x 2.36mm including 18% gst, sieve brass frame 20cm dia x 1.18mm including 18% gst, sieve brass frame 20cm dia x 600 microns including 18% gst, sieve brass frame 20cm dia x 300 microns including 18% gst, sieve brass frame 20cm dia x 150 microns including 18% gst, sieve brass frame 20cm dia x 75 microns including 18% gst, pan and cover for 30cm dia sieves including 18% gst, pan and cover for 20cm dia sieves including 18% gst, slump test apparatus including 18% gst, mould, cast iron, for 150mm cube with isi certification mark including 18% gst, core cutter with moisture meter including 18% gst, speedy moisture meter, range 0-25% (gauge div.:0.5%) with digital weighing balance including 18% gst, compaction test apparatus for light compaction including 18% gst, vernier caliper 150 x 0.1mm digital including 18% gst, vicat apparatus with isi certification mark, is:5513, fitted in aluminium box including 18% gst, le-chatelier mould, with isi certification mark is:5514, each including 18% gst, le-chatelier water bath with controller size 12"x9"x12" including 18% gst, liquid limit device, motorised, with casagrande grooving tools and gaugeblock including 18% gst, steel tape 300ft and 10ft including 18% gst, digital universal penetrometer for soil testing with cone & cup and bitumentesting (cone & kit optional) including 18% gst

CTN :40916802

29 Jul, 2025 NA

Kamrup - Assam

Tender For corrigendum : supply of ss cercalge wire 18 gauge , ss cercalge wire 20 gauge , ss cercalge wire 22 gauge , steinmann pins dia 3 dot 5 mm x 150 mm long with trocar tip and 3 faced chuck end dot , steinmann pins dia 4 dot 0mm x 150 mm long with trocar tip and 3 faced chuck end dot , schanz screws 5 mm self tapping with 40 minus 50mm threadingcomma 200 mm length stainless steel dot material minus 316 lvm stainless steel dot , schanz screws 6mm self tapping with 40 minus 50mm threadingcomma 200 mm length stainless steel dot material minus 316 lvm stainless steel dot , wire kirschner 20 cm long x 2 dot 5mm diacomma 316 lvm stainless steel dot , wire kirschner 20 cm long x 3mm diacomma 316 lvm stainless steel dot , calibrated drill bits 3 fluted solid h dot s dot s dot 130 minus 150 mm length 2 dot 7mmcommacompatible with quick coupling drive dot 316lvm stainless steel dot , calibrated drill bits 3 fluted solid h dot s dot s dot 130 minus 150 mm length 2 dot 5 mm compatible with quick coupling drive dot 316lvm stainless steel dot , ao pattern 1 slash 3rd tubular platescomma 3 dot 5mmcomma 6 holescomma stainless steel with compatible 6 x3 dot 5mm corticalself tapping and 2x3 dot 5mm cancellous screw , ao pattern 1 slash 3rd tubular platescomma 3 dot 5mmcomma 8 holescomma stainless steel with compatible 6 x3 dot 5mm corticalself tapping and 2x3 dot 5mm cancellous screw , ao pattern 4 dot 5 mm titanium lcp narrow 8 minus 14 holes with locking and cortical screws complete construct , 3 dot 5 mm lcp clavicular hook plates for right slash left sidecomma 15mm hook depth 4 minus 7 holes 4 locking and cortical screws complete construct dot , 3 dot 5 mm lcp clavicular hook plates for left sidecomma 18mm hook depth 4 minus 7 holes 4 locking and cortical screws complete construct dot , herbert screw size 2 dot 4mm length 18 minus 24 mm dot full quality assurancetitanium , herbert screw size 3 mm length 18 minus 24 mm dot full quality assurancetitanium , herbert screw size 3 dot 5 mm length 18 minus 24 mm dot full quality assurancetitanium , flipcutter minus iii drill comma6 minus 12 mm including half size comma except 6 dot 5 mm for all inside acl reconstruction dot full quality assurancedisposable and pre minus sterilised , vapr probe 4 minus 5mm for ablation and coagulation pre minus sterilised with cable for attachment to mitek assorted size dot full quality assurance , acetabulum recon plate size 6 minus 14 hole 3 dot 5mm dot slash dot full quality assurance , 3dot5mm tit locking proximal humerus periarticular plate right slas left with 4 to 9 holes and 6 locking holes for proximal fragment with 8 locking and cortical screw , 3dot5mm lcp tit medial distal humerus plate rt slas lt 3to11 hole for shaft and 3to5 hole for extra articular medial condylar with 6x2 dot 7 slas 3 dot 5 locking and 2 x cortical screw , 3 dot 5mm lcp extra articular distal humerus plate right slash left 6 minus 12 holes with 7 locking and 2 cortical screws dot titanium , tit lcp proximal radial plates 2dot4 slash 2dot7 mm for radial head rim plate right slas left side2to4 holes in head and 2to5 holes in shaft with screw complete , lcp olecranon plate 3 dot 5 mm right slash left 3 minus 12 holes in shaft with locking screws and cortical screws complete construct dot titanium , meniscus repairing kit complete dot full quality assurance compatible with mri pre minus sterilised , knot pusher slash cutter dot full quality assurance , 2dot4 slas 2dot7 mm volar distal radius locking plate with5 holes in horizontal slash oblique with 5 x locking and 2 x cortical screw complete construct , graft passing pin with eyelet like beeth pin for acl slash pcl 2 dot 7 mm dot full quality assurance , 3dot5mm tit lcp for proximal lateral tibia right slash left with minimum 3 rafting screw 2 to 9 holes for shaft with 8 x 3 dot 5mm locking screws and cortical screws complete , synthetic cast like primacast 10 cmx 2 dot 7m dot full quality assurance , tit lcp for proximal medial tibia 3 do

Central Government And Public Sector

CTN :41074761

06 Aug, 2025 NA

Cuttack - Odisha

Tender For supply of chair , almirah , table , induction chullah , basin , weight machine , foot step , patient trolly , fan , ups , computer set , bed , plastic stool , plastic chair , compressor , dressing trolley , wooden bed , printer , cooler , aqua guard , tv , dish top , camera , audiometer , ac , water cooler , coff machin , hand brush cutter , laptop , vice , vacuum machine , monitor , scanner , dg set 250kva , lift , dvd writer , wireless router , biometric machine , control panel , transformer , radiator , pump , book case , cabinet , plastic bench , liebert emerson , traction unit , sliding caliper martin type , interferntial therapy , shortwave diathermy , infrared lamp floor , grip exerciser , peg board large , pyramid round , stimulator , bio feed back , ultrasound electroson , physio paraffin wax bath , arm leg ergometer system , static cycle heavy duty , walker rolator junior , physio walker scissor , electrically operated tilt table , sliding seat , sliding transfer board , vestibules swing system , passive motion kinetic , physio arm chest exerciser , manipulative block , quadriceps exercise table , foot exerciser , laser therapy unit , body former to body shape , vibrator electrical , refrigerator , vacuum cleaner , physio cuff weight , three point anaesthetiometer , wright peak flow meter , seat and reach test , multiplex rack 3 shelves , floor seater , board white marker , suite case vip , shoulder abduction ladder , physio hand exercise table , bone drilling hand piece , electric cast saw , c arm , aneasthesia machine , ot light , wire tensioner , handy cast saw , battery operated drill , blade circulator , brass iron , wire bender twister , mayo scissor , t e scissor , plier heavy duty , canulated reamer , bholer stirrup medium , bholer stirrup large , electro handle disposable , saline stand , instrument sterilizer ) /bid number : gem/2025/b/6453714 * /dated: 15-07-2025 & & / bid document 1 / 73

CTN :41114419

29 Jul, 2025 NA

West Kameng - Arunachal Pradesh

Tender For tender for supply of welding items d d - apron leather for welder superior quality , gloves leather for welder superior quality , welding holder is standard , dark glass for welding screen 4 inch x 3 inch superior quality , mild steel welding electrode ferro speed size 3.15 mm x 450 mm 150 pcs pkts is standard , mild steel welding electrode hard facing citemnngam size 4x450 mm is standard , welding rod cast iron size 3.15 x 350 mm is standard , wire brush for welder size 6 inch x 2 inch , goggles for welder is standard , welding glass white is standard , hand welding blow pipe with 6 nos swaged tips size 2 3 6 13 and 20 mm , oxygen gas regulator double stage superior quality , acetylene gas regulator double stage is standard , rubber hose for oxygen gas isi bis marked , rubber hose for acetylene gas isi bis marked , eutectic 680 welding rod size of 3.15mmx450mm is standard , eutectic 680 welding rod size of 4mmx450mm is standard , welding gas lighter is standard , stone for gas welding lighter , gas cutter heavy duty is standard , gas welding torch is standard , arc welding rod ms e6012 size 2.5x350mm is standard , arc welding rod ms e6012 size 3.15x450mm is standard , arc welding rod ms e6012 size 4x450mm is standard , arc welding rod ms e6013 size 2.5x350mm is standard , arc welding rod ms e6013 size 3.5x450mm is standard , arc welding rod ms e6013 size 4x450mm is standard , esab cutogen 5 gases cutting torch is standard , welding cable with copper conductor heavy duty 600 amp isi marked , two stage regulator for oxygen & actylenept no 070017241 is standard , flash back arrestor for oxygen or actylene gas work , oxygen oractylene gas welding torch tips sets set of tip size 1 to 5 is standard , ms gas welding rod diff sizes , safety shoes size 7 isi or bis marked , safety shoes size 8 isi or bis marked , safety shoes size 9 isi or bis marked , brass brazing welding rod diff size , gas cutting nozzle 1 by 32 is standard

Arthroscopy Shaver System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Trust

Central Government And Public Sector