Get complete information related to latest Ash Water Pump Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ash Water Pump Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ash Water Pump Tenders.
Tender For annual maintanance of water supply materials to water supply section in cmc hosakote limits - dia pvc tee 50mm, supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (c class) as per is 1239 (part-i) 1990 with latest amendments with isi mark (one end fitted with heavy duty collar and other end fitted with protective cover) 50 mm.dia, supply and delivery at site brand new best make pvc insulated cable of flat 3 core (sheathed) of nominal cross sectional area as per is 694-1990 with isi mark and as per its latest amendments.1x3x6 sqm., providing,supplying to work site, submersible pump set of 150mm dia suitable for bore well and confirming to is 803420003phase ss bowl & impeller with low volt motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. for 20.00 hp - 135 lpm 350 m 25 stg outlet dia 2.00, di elbow.6 inch, ms flange.4 inch, ms flange.3 inch, ms flunge.2 inch, sewage hose pipe.3/4 inch, gi pipe.3/4, solvent cement for ws, non return valve heavy duty.2 inch gm, gland packing batti.10 mm, pvc elbow.8inch, hemp rope., g.i pipe c class 33kg 2 inch, outdoor panel board box 5x3x1 feet french door lock double door lock system.18 gauge, g.i tap.3/4 inch, pipe wrench.24 inch, chiniki., lock.60mm, lead., providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, for sluice valve of pn -10.0 and 200mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100% leak proof with face to face dimensions as per is 14846-2000 with the latest for sluice valve of for sluice valve of pn -10.0 and 150mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100% leak proof with face to face dimensions as per is 14846-2000 with the latest amendments only. the stem sealing should complete for sluice valve of for sluice valve of pn 10.0 and 100mm, chain rinch.24 inch, end cap.8 inch, gm gate valve isi make.2 inch, c.i.pipe.6 inch, pikaxe ., axa blade., bolts and nuts.1/2 inch, bolts and nuts.3 inch, bolts and nuts.4 inch, bolts and nuts for valves., crow bar., grease. for ws, gi pipe.1 1/4 inch, g.i clamp set.2 inch, g.i plunge set.2 inch, g.i bore cap.2 inch, g.i pipe b class 29 kg.2 inch, pvc tail pieces.6 inch, pvc tail pieces.4 inch, pvc tail pieces.3 inch, pvc tail pieces.2 inch, pvc reducer.4 inch x 2.5 inch, pvc reducer,4 inch x 6 inch, pvc reducer. 3 inch x 2.5 inch, pvc reducer.3 inch x 6 inch, pvc reducer. 3 inch x 4 inch, pvc reducer.2 inch x 2.5 inch, pvc reducer.2 inch x 3 inch, pvc reducer 160 mm dia., pvc reducer 140 mm dia, pvc reducer 110 mm dia., pvc reducer 90 mm dia., pvc reducer 50 mm dia, supply and delivery at site special moulded variety pvc reducer as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark with its latest amendments, pvc saddle. 6 inch x 1/2 inch, pvc end cap. 6 inch, pvc collar.6 inch, pvc saddle.4 inch x1/2 inch, pvc end cap. 4 inch, pvc saddle.3 inchx1/2 inch, pvc end cap 3 inch., pvc saddle. 2.5 inch x1/2 inch, pvc end cap.2.5 inch, pvc saddle. 2 inch x 1/2 inch, pvc end cap. 2 inch, pvc m.t.a. 2 inch, pvc f.t.a 2 inch, xlpe 1.1 kv, or heat resistant pvc insulated, pvc exutruted inner seath armoured ltug cable25 sqmm, 4 core,, pvc reducer 75 mm dia., pvc reducer 63 mm dia., xlpe 1.1 kv, or heat resistant pvc insulated, pvc extruded inner seath a
Tender For supply of 200nb diaphragm valve for ash slurry pumps and ashwaterpumps of unit-iv & v.note:1. prospective bidders may get the specification free of cost by downloading from the following websites.tangedco www.tangedco.gov.innic https://tntenders.gov.intender opening (electronically):o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/sp/ttps)
Tender For corrigendum : tender for supply of procurement of spares of ksb make raw and potable cooling waterpumps : : - pump shaft rdlv200-340/400 part no. 1211 for raw waterpump , double-entry-imp rdl200-340b , part no 1234 , casing wear ring rdl200-340b , part no 1502 , impeller wear ring 503 for raw waterpump 40hp , model-rdlv-200-340b , shaft protective sleeve for raw waterpump , 40 hp , rdlv 200-340 b , part no.4001-201-006 , shaft protecting sleeve 70x200 part no. 1524 for raw waterpump , bearing bush k70 , 2x120 part no. 1545 for raw waterpump , parallel key a10x6x30 part no. 1940.1 for raw waterpump , parallel key a16x10x140 part no. 1940.2 for raw waterpump , parallel key a14x9x90 part no. 1940.3 for raw waterpump , shaft protecting sleeve 60x190 part no. 1524 for clean waterpump , bearing bush for 40 hp clean waterpump , model no.rdlv 150-340a , parallel key a8x5x25 part no. 1940.1 for clean waterpump , parallel key a14x9x110 part no. 1940.2 for clean waterpump , parallel key a10x8x80 part no. 1940.3 for clean waterpump
Tender For supply of spares for lubi make vertical centrifugal pump for raw cooling water system d d - impeller of lvs 300-330 75 kw part no- 2002 , hex nut of lvs 300-330 75 kw part no-2017 , o-ring of lvs 300- 330 75 kw part no- 2018 , impeller key of lvs 300-330 75 kw part no-2024 , hex bolt of lvs 300-330 75 kw part no- 2027 , impeller washer of lvs 300-330 75 kw part no-2028 , stud of lvs 300-330 75 kw part no- 2029 , stud of lvs 300-330 75 kw part no- 2055 , hex nut of lvs 300-330 75 kw part no- 2056 , back cover - complete assembly with bush- of lvs 300-330 75 kw part no-2061 , spacer of lvs 300-330 75 kw part no- 2062 , seal housing of lvs 300-330 75 kw part no- 2063 , cap screw of lvs 300-330 75 kw part no- 2064 , pump shaft of lvs 300-330 75 kw part no-2067 moc- ss410 , washer of lvs 300-330 75 kw part no-2068 , cap screw of lvs 300-330 75 kw part no-2069 , washer of lvs 300-330 75 kw part no- 2070 , cap screw of lvs 300-330 75 kw part no- 2071 , split couple of lvs 300-330 75 kw part no-2072 , cap screw of lvs 300-330 75 kw part no- 2073 , hex bolt of lvs 300-330 75 kw part no- 2074 , hex nut of lvs 300-330 75 kw part no- 2075 , mechanical seal of lvs 300-330 75 kw part no-2014
Tender For ttps â mech.ii â ahp â dismantling the existing wornout ms structural supports, fabrication, erection of newly fabricated structural support works in ashwaterpump house and seal water filteration plant in unit iv & vnote: prospective bidders may get the specification free of cost by down loading from tangedco website