Get complete information related to latest Audio Cable Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Audio Cable Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Audio Cable Tenders.
Tender For supply of design supply and installation of radar gauges : : - d,s,i,c of radar gauges , d,s,i,c of multispot tem sensor , d,i,s,c of hi-hi level tunning , d,s,i,c of pressure transmitter , sply and laying of 1.5sqmm 2pair cable , sply and laying of 1sqmm 12core cable , sply and laying of 2.5sqmm 3core cable , sply and fixing of flp power jb , sply and fixing of sil2 jb , sply and fixing of thum jb , sply and fixing of 1by2 inch npt cable gland , sply and fixing of 3by4 inch npt cable gland , sply and fixing of 1 inch npt cable gland , sply and fixing of 1by2 inch npt blind plug , sply and fixing of power isolation switch , wireless connect redundancy , 1st year amc , 2nd year amc , 3rd year amc , 4th year amc , 5th year amc , sply and fixing of earthing wire 4mm
Tender For corrigendum : supply of procurement of spares for prabhu make 3300 v nflp dol starter c c > f> f - isolator 200 amp,3.3 kv on off, part no. - ht100 , vaccum contactor closing coil 110v dc, part no. - 203 , vacuum contactor holding coil 110v dc, part no. - ht204 , undervoltage relay, part no. - ht2000 , brass cable gland complete with ci clamp, part no. - ht1600 , vacuum contactor rectifier bridge, part no. - ht201 , earth leakage relay for star delta start, part no. - ht800 , dmc moulded 3.3kv insulator for power f, part no. - 700 , static type idmtl over current and short, part no. - ht900a , single phase preventer, cup-20 pfr make, part no. - 2001 , vacuum contactor 400 amps, 3.3kv, part no. - ht200 , bottle for vacuum contactor 3.3 kv, 6.6k, part no. - ht202
Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c
Tender For restoration of the structural platform of gland water draining arrangement and the cable ducts attach with the ht pump-motor sets at pressure station no-3, igwtp.
Tender For bid to ras sitc of vrv vrf hvac system with allied equipments work st at esic hospital angul - outdoor unit 18 hp , outdoor unit 16 hp , cassette type indoor unit 1.2 tr , cassette type indoor unit 1.6 tr , cassette type indoor unit 2.0 tr , cassette type indoor unit 3.6 tr , hi wall type indoor unit 1.2 tr , high static ductable units 5.5 tr , high static ductable units 8 tr , 20 mm drain piping , 25 mm drain piping , 6.4 mm cu refrigerant piping , 9.5 mm cu refrigerant piping , 12.7 mm cu refrigerant piping , 15.86 mm cu refrigerant piping , 19 mm cu refrigerant piping , 22.2 mm cu refrigerant piping , 25.4 mm cu refrigerant piping , 28.58 mm cu refrigerant piping , 34.9 mm cu refrigerant piping , 41.3 mm cu refrigerant piping , cable tray of size 150 mm x 50 mm x 1.6 mm , cable tray of size 300 mm x 50 mm x 1.6 mm , cable tray bends of size 150 mm x 50 mm x 1.6 mm , cable tray bends of size 300 mm x 50 mm x 1.6 mm , cable tray tee of size 150 mm x 50 mm x 1.6 mm , cable tray tee of size 300 mm x 50 mm x 1.6 mm , gss sheet metal , gi volume control duct damper , aluminium supply air grills with damper , supply air diffusers , return air diffusers , class o insulation wit aluminium foil , pvc sheathed copper conductor , armoured cable 35 sqmm , armoured cable 70 sqmm , gland and lug , g.i wire , y joint or multijoint , refrigerant gas r410a , copper earth plate , 100 a 4p mccb , 63 a 4p rccb , 16 way double door mcb box , tpn double door distribution box , 25x5 mm gi strip , 6 swg gi wire , mcb 5 to 32 a , laying and fixing of pvc insulated xlpe cable , 20 mm pvc cassing , 25 mm pvc cassing
Tender For corrigendum : supply of cast copper alloy screw down bib taps and stop valves for water services as per is 781 (q3) , flushing cistern (q3) , ptmt tap fitting (q3) , led batten (q2) , towel rail / ring for bathroom (q3) , piano type non modular electrical switch socket combination as per is 3854 and is 1293 (q3) , european pattern toilet seat vitreous china (q3) , putty for use on window frames as per is 419 (q3) , gland packaging (q3) , piano type modular domestic fan regulator as per is 11037 (q3) , tower bolts (ferrous metals) as per is 204 (q3) , led garden light (v2) (q2) , elecric bells and accessories as per is 2268 (q3) , pvc insulated unsheathed cable with flexible conductor as per is 694 (q2) , non - modular piano type domestic electrical switches as per is 3854 (q3) , m - seal as per is 9197 (q3) , mcb - miniature circuit - breakers for a. c. operation as per is / iec 60898 (part 1) (q2)
Tender For supply of double compression cable gland with entry dia 12mm , double compression cable gland with entry dia 16 mm , double compression cable gland with entry dia 20mm , double compression cable gland with entry dia 24mm , double compression cable gland with entry dia 25mm , double compression cable gland with entry dia 30mm , double compression cable gland with entry dia 32mm , double compression cable gland with entry dia 36mm , double compression cable gland with entry dia 38mm , double compression cable gland with entry dia 45 mm , double compression cable gland with entry dia 48 mm , double compression cable gland with entry dia 54mm , single compression cable glands with nipple hole dia 12mm and suitable cable od 8-12mm , single compression cable glands with nipple hole dia 14. 5mm and suitable cable od 12-15 mm , single compression cable glands with nipple hole dia 14. 5mm and suitable cable od 15-18 mm , single compression cable glands with nipple hole dia 20mm and suitable cable od 16-20 mm , single compression cable glands with nipple hole dia 20mm and suitable cable od 2024 mm , single compression cable glands with nipple hole dia 26. 5 mm and suitable cable od 24-27mm , single compression cable glands with nipple hole dia 32. 5 mm and suitable cable od 24-28 mm , single compression cable glands with nipple hole dia 32. 5 mm and suitable cable od 27-32 mm , single compression cable glands with nipple hole dia 32. 5 mm and suitable cable od 32-37 mm , single compression cable glands with nipple hole dia 44 mm and suitable cable od 38-44 mm , single compression cable glands with nipple hole dia 44 mm and suitable cable od 42-48 mm , single compression cable glands with nipple hole dia 56 mm and suitable cable od 48-54 mm ) /bid number: gem/2025/b/6923988 * /dated: 10-12-2025 & & / bid document1 / 30
Tender For supply of cable gland (ip-68) as per item no.6 and note-4 of rcf drg no. lw-71231 alt. f or latest and as per rcf spec no: edts 101 rev-c, amendment-3, corrigendum- 8 and annexure-1 or latest.