Latest auto actuator Tenders | Government auto actuator Tenders

Central Government/Public Sector

CTN :44786950

28 Apr, 2026 41.04 Lacs

Sidhi - Madhya Pradesh

Tender For supply of lt-10r cartridge-part no.-13193 , liner-part no.-71230 , foray dry chemical-part no.-53080 , auto actuator- part no.-435479 , ansul protracting act dev pad-part no.-436026 , lt- 101-30r cartridge-part no.-29187 , burust disc assly-part no.-428363 , 30-cortridge-part no.-5373 , inergen cylinder 200bar-part no.-442787 , battery mouded sch-part no.-427308 , checkfire mp elec. detect. and act. assy.-part no.-427312 , manual actuator assy-part no.-57484 , actuator fire ext nitrogen prop cyl-part no.-25697 , blow- off cap-part no.-415192 , elbow assy 1by8 pipe-part no.-85002

corporations/Associations/Others

CTN :44308118

11 Apr, 2026 6.55 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : supply of price break up - cell connector for 48 v, exide make 645 ah battery (type-yhp-13/opzs-200p) (275mmx38mmx3mm) with two holes (as per sample), cell connector for 220 v, exide make 2250 ah battery (type- yhp-43/yhp-39/yhp-27/opzs-700p) (163mmx38mmx5mm) with two hole (as per sample), lead coated nut & bolt size 10x50 for lead acid plante battery connector (as per sample), seperator for lead acid plante battery (as per sample), vent cap for lead acid plante battery (as per sample), cell connector for 220v, exide make700 ah battery (155mmx30mmx5mm) with two hole (as per sample), expanded type m.s. wire mesh of size 1.5x2.00mm crossed wire section, phg v- belt a84, v - belt c-112, v. belt b-134, v- belt a-65, 3135_v belts b-91 material- rubber, v' belt a-54, phg v- belt a77, v- belt b-83, ss wire meshmesh size:120 micronwidth: 1.0 mtrpurpose: oil flushing.(as per sample), ss wire mesh mesh size:1/1mm, 28 gauge width: 1.0 mtr purpose: raw water filtration.(as per sample), elements of discharge strainer for srw pumps.perforated metal thickness : 2.0mm.material :ss-304 (as per sample)

Central Government/Public Sector

CTN :44741657

08 Apr, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For sam turbo pump spares for st 3 area - coupling set,5,vg 65/430+arl, motor mntg stool,35.152b,vg 65/430+arl, single column pipe,72.352,vg 65/430+arl, single shaft,22.352,vg 65/430+arl, base plate,90.052,vg 65/430+arl, gland housing,46.3,vg 65/430+arl, bearing housing,36.052,vg 65/430+arl, bearing cap,37.052,vg 65/430+arl, lock washer,94.053,vg 65/430+arl, lock nut,93.153,vg 65/430+arl, bearing bed,35.152a,vg 65/430+arl, labyrinth,55.553,vg 65/430+arl, delivery pipe assy,72.052,vg 65/430+arl, strainer,63.03,vg 65/430+arl, bush housing,17.3,vg 65/430+arl, impeller,24.2,vg 65/430+arl, shims,ms,sam turbo,vg 65/430+arl, gland ring,46.9,sam turbo,vg 65/430+arl, lantern ring,46.10,sam turbo, inner bearing cap,37.053,sam turbo, bearing bed,33.152,sam turbo, volute casing,11.4,sam turbo, shaft sleeve,53.5,sam turbo, bearing housing,9,is 210,sam turbo

CTN :44757118

23 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur furnace , makin

CTN :44736704

09 Apr, 2026 12.02 Lacs

Salcete - Goa

Tender For designing, programming and implementation of customised automation (on and off) of three submersible pumpset for 800cum glr at dhadem along with installation of customised and automatised actuator based valve of 250mm dia inlet in v.p sanvordem.

CTN :44721087

22 Apr, 2026 NA

Kolkata - West Bengal

Tender For supply of strum box strainer and mud box for yard 3050 to 3057 mpv d d - g1_1_80 nb strum box, ms-galv , g1_2_50 nb strum box,ms-galv , g1_3_80 nb strum box, ms-galv , g1_4_50 nb strum box,ms-galv , g1_5_65 nb strum box,ms-galv , g1_6_125 nb strum box,ms-galv , g2_1_8mm od basket-y-typ strainer_urea trnsfr , g2_2_dn25 basket strainer for sw , g2_3_dn25 basket strainer for sw-bilge , g2_4_dn32 basket strainer for fo , g2_5_dn50 basket strainer for fw , g2_6_dn50 basket strainer for sw , g2_7_dn65 basket strainer for sw , g2_8_dn100 basket strainer for sw , g2_9_dn125 basket strainer for sw , g2_10_dn150 basket strainer for sw , g2_11_dn200 basket strainer for sw , g2_12_dn350 basket strainer for sw , g2_13_dn80 basket strainer for bw-gw , g2_14_dn40 oil strainer_basket typ_sludge oil , g2_15_dn50 basket strainer for hot water , g2_16_dn10 basket- y-type strainer_lube oil , g2_17_dn25 y-type strainer_compressed air , g2_18_dn25 y-type strainer for lube oil , g2_19_dn50 basket strainer for sw , g2_20_air filter_hole dia 40 microns , g2_21_8mm od basket-y-typ strainer_urea trnsfr , g2_22_dn25 basket strainer for sw , g2_23_dn25 basket strainer for sw-bilge , g2_24_dn32 basket strainer for fo , g2_25_dn50 basket strainer for fw , g2_26_dn50 basket strainer for sw , g2_27_dn65 basket strainer for sw , g2_28_dn100 basket strainer for sw , g2_29_dn125 basket strainer for sw , g2_30_dn150 basket strainer for sw , g2_31_dn200 basket strainer for sw , g2_32_dn350 basket strainer for sw , g2_33_dn80 basket strainer for bw-gw , g2_34_dn40 oil strainer_basket typ_sludge oil , g2_35_dn50 basket strainer for hot water , g2_36_dn10 basket- y-type strainer_lube oil , g2_37_dn25 y-type strainer_compressed air , g2_38_dn25 y-type strainer for lube oil , g2_39_dn50 basket strainer for sw , g2_40_air filter_hole dia 40 microns , g3_1_80 nb mud box-angle type , g3_2_80 nb mud box-angle type

CTN :44705992

09 Apr, 2026 13.11 Lacs

Baran - Rajasthan

Tender For purchasing spares for minimac make oil filtration machines installed in turbine governing system skid and hplp bypass hpsu skid installed in turbine area in unit 5and6 (2x660 mw) csctpp, chhabra is proposed to be procured through single source - - air release valve, modelno:-dbv-14, 1/2"bsp ,brass, nbr seat,0-7kg/cm2,230v ac, 9w, h class 230 ac coil, filter clogging indicator for cu series filter, first stage10-micron filter element with 99.8% efficiency, beta-1000, make: minimac, part no: mscufefa10, foam sensor, lbfs, low level switch, mfps-n15c, differential: ±3 mm, switching voltage max:140vac/200 vdc, switching current max:0.5a, middle level switch, mfps-n15c, differential :±3 mm, switching voltage max:140 vac/200 vdc, switching current max:0.5a, n2 filter (tmr unit), n2 flow meter (tmr unit), pre-heater, 6000-watt heater element, 415 v,3 ph, length 460mm, ms flange od 160 mm, pcd-134 mm,6 hole size 9.5 mm filter elemen for pre-heater, pressure gauge 63 mm dia, pump oil seal and o-ring (rotary gear pump) (white tone), resin for trix machine, part no: mspl-rsn100, safety level switch, mfps-n15c, model no. mfps-n15c(m), level indication, low levels, 1/2" bsp liquid sp.gr.min:0.8, temperature max: 130°c test pressure max:5kg/cm2, moc: ss304 float:ø17, connection: 1/2"bsp(m), second stage 03-micron filter element with 99.8% efficiency, beta-1000, make: minimac, part no:mscufefa03, solenoid valve with diaphragm, model no:mcv-43., 1" bsp, cf8,0.5-12 bar pressure, 24 v dc coil, solenoid valve, modelno:-dbn-14z, 1/4" bsp,brass,nbr seat,0-7kg/cm2,230v ac, 9w, h class 230 ac coil, suction strainer 149-micron filter element, make: minimac, part no: ms20-m 149, temperature gauge 63 mm dia, temperature sensor, vacuum gauge 63mm dia, vacuum pump with oil seal, o-ring, filter, nrv, vacuum switch with fitting, model no:-mg-v-00-ka10, vacuum switc

State Government

CTN :44485204

07 Apr, 2026 1.49 Lacs

Bolpur - West Bengal

Tender For installation of 1 nos. submersible pump within 80 mm dia and 72 m depth pvc pipe for withdrawn ...maa canteen at bolpur siyan hospital, under bolpur municipality - installation of 1 nos. submersible pump within 80 mm dia and 72 m depth pvc pipe for withdrawn water of drinking tubewell by using water jet system with pvc housing pipe , high density pvc strainer with pvc storage tank and necessary pipe , fittings over ms structure stand at maa canteen at bolpur siyan hospital, under bolpur municipality. price schedule (this boq template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. bidders are allowed to enter the bidder name and values only )

State Government

CTN :44485217

07 Apr, 2026 1.55 Lacs

Bolpur - West Bengal

Tender For installation of 1 nos. submersible pump within 80 mm dia and 72 m depth pvc pipe for withdrawn ...at (i) kacharipatty malpara in ward no-18 under bolpur municipality. - installation of 1 nos. submersible pump within 80 mm dia and 72 m depth pvc pipe for withdrawn water of drinking tubewell by using water jet system with pvc housing pipe , high density pvc strainer with pvc storage tank and necessary pipe , fittings over ms structure stand at (i) kacharipatty malpara in ward no-18 under bolpur municipality. price schedule (this boq template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. bidders are allowed to enter the bidder name and values only )

State Government

CTN :44485219

07 Apr, 2026 1.56 Lacs

Bolpur - West Bengal

Tender For installation of 1 nos. submersible pump within 80 mm dia and 72 m depth pvc pipe for withdrawn ...at (i) bhubandanga id-gha in ward no-06 under bolpur municipality. - installation of 1 nos. submersible pump within 80 mm dia and 72 m depth pvc pipe for withdrawn water of drinking tubewell by using water jet system with pvc housing pipe , high density pvc strainer with pvc storage tank and necessary pipe , fittings over ms structure stand at (i) bhubandanga id-gha in ward no-06 under bolpur municipality. price schedule (this boq template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. bidders are allowed to enter the bidder name and values only )

Auto Actuator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government