Latest auto injector Tenders | Government auto injector Tenders

CTN :40912831

15 Jul, 2025 NA

Vellore - Tamil Nadu

Tender For supply of laboratory instruments - biochemistry - supply of lab equipments (for lab equipmnent technical specifications of each items refer nit):- department of biochemistry, precision electronic weighing balance 01 mg correction, remi mini centrifuge, bench mark hot plate sigma aldrich, autoclaves 12*22 stainless steel, vertical 40l, micro pipettes, thermo scientific finn pipette, f31 10 micro litre,, micro pipettes, tarsonaccupipette, 10 100 micro lit, incubator, met lab ,45 lit, hot air oven , lab india,45 lit, vortex mixer, labpro, ph meter, labtronic digit ph meter with stirrer, water bath , rectangular waterbath, 6 holes, labsolutionindia, photo colorimeter, labtronics, 8 filter, photo colorimeter, scien tech 400-600nm 8 filter, tissue homogenizer20ml, compound microscope (100x, compound microscope (450x), colony counter , hitech lab india led, electrophoresis kit agarose gel, for dna analysis, electrophoresis with power pack sds and page, mini, water distillation unit, 4 lit, bionexislab orbital shaker mixer 40-200rpm, remi bench top clinical centrifuge - 4x15ml, sunline doctor centrifuge machine 8x15 ml, laminar air flow horizontal laminar air flow machine, working place 4x2x2 ft, semi auto analyser (ichem), chromatography column, borosilicate, refrigerator 184 lit, deep freezer blue star cf3-130neyw 130 liter single door, spectrophotometer -thermo scientific evolution 160 uv-vis spectrophotometer, uv transilluminator bio-rad uview mini transilluminator uv light box, microtone bexco hand & table microtome lab equipment, micro pipette tips 1 10 l- 1000 x 2, micro pipette tips 10 100 l - 1000 x 2

CTN :40862067

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862068

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 04/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 02 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

CTN :40862072

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862073

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 08/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 06 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

CTN :40862074

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862076

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862077

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862078

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862079

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

Auto Injector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors