Latest automated optical inspection Tenders | Government automated optical inspection Tenders

corporations/Associations/Others

CTN :41508588

03 Oct, 2025 9.77 Crore

Pune - Maharashtra

Tender For request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm consisting of m

CTN :40716360

02 Sep, 2025 NA

Delhi - Delhi

Tender For bid to ras bid to ras corrigendum : supply of fcc enclosure , wireless fcc , wireless master module , hdmi cable 5 mtr , wireless slave module , rfid tag card reader , peso approved rfid tag reader , peso approved rfid ring , rfid tag card , atg prob full set two and a half to three meter with density , atg barrier , power cable , signal , supply and installation of server software , installation and commissioning

CTN :41359776

01 Sep, 2025 NA

Ernakulam - Kerala

Tender For providing of custom bid for services - supply of qc equipments at irimpanam installation - supply, testing and calibration certificate submission of hydrometers-0.700-0.750 (g/ml) (as per nabl accredited iso 17025:2017) as per enclosed specification., supply, testing and calibration certificate submission of hydrometers-0.750-0.800 (g/ml) (as per nabl accredited iso 17025:2017) as per enclosed specification., supply, testing and calibration certificate submission of hydrometers-0.800-0.850 (g/ml) (as per nabl accredited iso 17025:2017) as per enclosed specification., supply, testing and calibration certificate submission of hydrometers - 0.850-0.900 (g/ml) (as per nabl accredited iso 17025:2017) as per enclosed specification., supply, testing and calibration certificate submission of thermometer -20 to 102 degree celsius as per enclosed specification., supply, testing and calibration certificate submission of alcohol meter - as per is 3608 (94-104% v/v - nabl accredited) as per enclosed specification., supply, testing and calibration certificate submission of density jar/ glass jar - 500ml as per enclosed specification., supply of pipette class a 10 mi().1 ml grad. as per enclosed specification., supply of stoppered measuring cylinder - 150ml as per enclosed specification., supply of stopered cylinder - 100 ml as per enclosed specification., supply of all level liquid sampler - 1000 ml as per enclosed specification., supply of zone sampler 1000 ml as per enclosed specification., supply of closed cup thermometer holder -150 ml as per enclosed specification., supply of measuring dip tape as per enclosed specification., supply of oil finding paste, supply of water finding paste, supply of ebms 20% oil finding paste, supply of ebms 20% water finding paste, supply of sampling chain (30m), supply of atf water finding jars - 500 ml, supply of atf water finding jars - 1000 ml, supply of cylindrical aluminium sample container with locking arrangement - 1 ltr as per enclosed specification., supply of wooden box with 1 ltr aluminium sample container as per enclosed specification., supply of glass bottle for ethanol-1000ml, supply of manila rope for sampling 8mm dia., supply of rubber gloves, supply of cotton waste, supply of steel bucket 10 l, supply of aluminium bucket 10 l, supply of steel bucket 51., supply of dip rod 3 mtr

CTN :41508263

10 Sep, 2025 NA

Shahdol - Madhya Pradesh

Tender For supply of physics lab equipment - procurement of physics lab equipment, millikans oil drop 1. gap between parallel plates : 5 mm 2. voltage supply between the plates: 140 800v dc continuously variable o regulation : 0.1% o stability : 1 digit 3. voltmeter : 3 digit led 4. illumination between the plates : led 5. microscope : magnification 30x 6. time meter : 0 999.9 sec 7. monitor: 420 tvl, lcd monitor 8. input power supply : 220v ac/50 hz 9. density of the oil used: 929 kg/m, fresnel bi-prism1. optical bench, 1000mm- 1 2. riders, lateral adjustment -2 3. riders, plain- 2 4. sodium lamp, 20w, 110v 1 5. adjustable slit -1 6. biprism carrier, adjustable 1 7. lens carrier, plain 1 8. eyepiece carrier, adjustable 1 9. micrometer eyepiece 1 10. ground glass screen- 1 11. eyepiece adapter ring -1 12. height fixing collar -3 13. biprism 1 14. lens, f = +150mm 1, cascade control trainer1.power supply: 220v ac / 50 hz or as per regional requirements 2.temperature range: ambient to 100 c or higher.3.flow rate range: 0 10 l/min (or adjustable based on application). 4.pressure range: 0 2 bar (or customizable).signal types: input: 4 20 ma, 0 5 v, 0 10 v (selectable). output: 4 20 ma, 0 5 v, 0 10 v (compatible with actuators).accuracy: 0.1% of full scale. response time: 100 ms. pid parameters: adjustable proportional, integral, and derivative gains., celeastron nexstar evolutionoptical deisgn: aplanatic schmidt-cassegrain aperture: 235 mm focal length: 2350 mm focal ratio: 10 focal length of eyepiece: 26 mm included barlow lens: omni 2x magnification of eyepiece: 90xmagnification of eyepiece with barlow: 180x finderscope: starpointer pro star diagonal: 2 mount type: single fork arm altazimuth tripod: stainless steel power requirements: internal battery included highest useful magnification: 555x lowest useful magnification: 34x limiting stellar magnitude: 14.4resolution (rayleigh): 0.59 arc seconds resolution (dawes): 0.49 arc secons light gathering power (compared to human eye): 1127xoptical coatings: starbright xlt secondary mirror obstruction: 3.35 in (85 mm) secondary mirror obstruction by diameter: 36%secondary mirror obstruction by area: 13%optical tube length: 22 intotal telescope kit weight: 21.14 kgmax slew speed: 4 degrees per secondtracking rates: sidereal, solar and lunaralignment procedures: skyalign, 3-star align, solar system aligncommunication ports: 1 hand control and 3 aux ports for optional accessoriesapp database: over 120,000 including 220 of the best deep sky and solar system objectsusb charge port: yes, spin coating unitprograms10 programs with up to50 steps each15 programs with up to50 steps eachspeed stability 2% 0.25%speed 120 rpm to 6,000 rpm 500 rpm to 10,000 rpmspin time 1 s- 1,000 s 1 s to 3,600 spower supply 24 vdc / 2ainterlock software/hardware interlockcase dimensionswidth: 170 mmheight: 140 mmdepth: 225 mmmaterialscentral pp unit andchuck, steel case, petdisplay and keypad, andtempered glass lidcentral ptfe unit andchuck, steel case, petdisplay and keypad, andtempered glass lidfuses 1 a slow blowweight 3 kg 3.7 kg, 3d printerpanel size 15 build size 33 x 18.5 x 40cm (lwh)build plate perforatedpanel resolution 8k resolutionaverage printing speed 70mm/hrxy resolution 43micronz-resolution from 10 micronoperation 5 touch panelconnectivity usb/ethernetslicer software chitubox v1.8.1printer size l40 x w47 x h68cmprinting volume l33 x w18.5 x h40cmprinter weight 35kghousing full metal, ellipso meter (holmarc)measurement range, 1 nm ~ 300 nm ; incident angle, 30 ~ 90 , error 0.1 ; dpss laser, 532 nm, 5 mw ; si photodiode, 5.8 x 5.8 mm active area ; polarizer, 0 ~ 360 ., michelson interferrometerbase dimension: 290x212x168mm (lxwxh)distance (m2 & bs): 100mmbeam splitter: 50 x 38 x7mm (lxwxt)compensating plate: 50 x 38 x 7mm (lxwxt)mirrors m1 and m2: 30 mm dia, thickness 10mmr:t: 50 : 50flatness of beam splitter: /8least count: 0.01mm (coarse adjustment knob)least count: 0.0001mm (fine adjustment knob), magnetic

CTN :41587944

06 Sep, 2025 11.31 Lacs

Nasirabad - Rajasthan

Tender For supply of multiport srv , srv trv , pressure gauges , pressure switches , pressure transmitters , temperature gauges , temperature switches , vacuum gauges , compound gauges , torque wrenches , digital density meter , ultrasonic thickness tester , cvt verifier , digital multimeters , clamp meters , lux meters , digital insulation testers , earth resistance testers , elcometers , alcohol breath analyzers , testing electrical insulation mats , settlement survey msv bullets

State Government

CTN :41370615

03 Sep, 2025 14.00 Lacs

Jummu - Jammu And Kashmir

Tender For corrigendum : supply of density meter

State Government

CTN :41568051

15 Sep, 2025 97.11 Lacs

Ahmedabad - Gujarat

Tender For supply of thermoplastic mask 3 clamp brain , thermoplastic mask 5 clamp head and neck hpci mask , thermoplastic mask 4 clamp thorax hpci mask , thermoplastic mask 2 clamp pelvis hpci mask , thermoplastic mask 4 clamp pelvis hpci mask , thermoplastic mask 6 clamp pelvis hpci mask , thermoplastic mask 2 push pin clamp extrimities hpci mask , thermoplastic mask 3 push pin clamp extrimities hpci mask , thermoplastic mask 4 push pin clamp extrimities hpci mask , thermoplastic mask 4 clamp head and neck , thermoplastic mask 3 clamp brain push pin , thermoplastic hybrid mask 3 clamp brain for cyberknife , thermoplastic hybrid mask 5 clamp head and neck for cyberknife , thermoplastic mask pediatric 3 clamp brain , thermoplastic mask pediatric 5 clamp head and neck , thermoplastic mask pediatric 4 clamp pelvis , thermoplastic pediatric mask 2 point pushpin knee and elbow extrimities , thermoplastic pediatric mask 3 point pushpin foot extrimities , thermoplastic pediatric mask 4 point pushpin elbow extrimities , ct markers fiducials , copper wire in meter , gel bolous 30cm x 30cm x 1 , gel bolous 30cm x 30cm x 5 , wax bolus material box size 12 , low density pe foam head rest set , aio breast and lung cushion set , belly board with all accessory , gold fiducial marker with inserting needles pack of 3 , carbon coated ceramic marker with inserting needles pack of 3 , acrylic base plate with scale for head and neck of 5 slots with all head rests , gafchromic films size 10 x 10 box of 25 , gafchromic films size 08 x 10 box of 25 , cyber knife film for e2e for skull and fiducial tracking films box size 20 , cyber knife film for e2e for spine tracking films box size 20 , cyber knife film for aqa film daily qa box size 100 , cyber knife film for e2e for lung tracking xlt phantom films box size 20 , gafchromic films a4 or a3 14 x 17 box size 10 , thermoplastic mask 2 clamp extrimities hpci mask , flexicath single leader pack of 5 , flexible interstitial radioopaque brachytherapy tubes -box size 100 //bid details 2 / 36

Central Government/Public Sector

CTN :41234458

01 Sep, 2025 NA

Lucknow - Uttar Pradesh

Tender For nit for supply and installation of digital liquid density meter

Central Government / Public Sector

CTN :41579949

04 Sep, 2025 NA

Vijayawada - Andhra Pradesh

Tender For industrial safety shoes with steel toe as per bis: 15298 :2016 (latest). break-up of shoes as total qty:: 84 pairs. break up of shoes sizes- shoe size: 6 - 02 pairs, shoe size: 7 -14 pairs, shoe size: 8 - 33 pairs, shoe size: 9 - 23 pairs, shoe size: 10 - 09 pairs, shoe size: 11 - 03 pairs. design-a (low shoe), type: sb, upper material for class 1 footwear-leather, toe cap- steel (metallic), pattern: derby, closing: laces(nylon), sole design: cleated, construction: single certification: bis, as per clause 5.3.5.2 of is 15298 ( part 2 ) - slip resistance on ceramic tile floor with sodium lauryl sulphate (nals) solution ,as per clause 5.3.5.3 of is 15298 ( part 2 ) - slip resistance on steel floor with glycerin ,as per clause 5.3.5.4 of is 15298 ( part 2 ) - slip resistance on ceramic tile floor with nals and on steel floor with glycerin, breaking load of laces (min) 600 n, collar collar with pu foam padding, 15 mm thick, density 25 kg per cubic meter, all specification should be as per attached gem catalogue. (1) note: one sample got approved before bulk supply. (2) central govt./nabl/ahsp/ilac test report should be produced along with material. make: bata/liberty/allen cooper only