Latest automatic swing door Tenders | Government automatic swing door Tenders

Corporations And Associations And Others

CTN :39372871

24 Feb, 2025 1.56 Lacs

Multi City - Haryana

Tender For maintenance of staff quarter no 3 at water works, sector-31, gurugram with repairing of brick work, tile work, putty, door shutter, wooden work finishing paint and all other works contingent thereto.

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

CTN :39100365

24 Feb, 2025 32.15 Lacs

Dehradune - Uttarakhand

Tender For corrigendum : tender for supply of centre table of size 1194 mm x 584 mm x 460 mm , made out of 70x35mm teak wood frame work and 45x45 mm teak wood rnouled legs , top to have 19 mm thick ply with 1mm thick laminated top , edges to have 30mmx30mm teak wood moulding finished with melamine polish all complete (supplier will get the sample approved before supply from estate manager , emu dehradun) , steel almirha large , material of almirah doors m s sheet , sheet thickne ss of door 1.0 mm , sheet thickness of sides , back , top and bottom 1.0 mm , sheet thickness of shelves 1.0 mm , sheet thickness of pedestal in mm 1.0 mm , material of lock brass and finish power coating , number of doors (nos) 2 , door stiffner upto full door height , provided with the almirah doors lock , height (without pedestal) (in mm) (+/- 10 min) 2000 , width (+/- 7 mm) 910 milimeter , depth (+/- 5 mm) 486 millimeter , inside shelves , pedestal height 125mm and width 100mm. (supplier will get the sample approved before supply , from estate manager , emu dehradun) , dinning chair made of second class teak wood , seat cusion 40 density 75 mm thick , upholstery cotton fabric 450 gsm , with back rest with cushion , material of frame wood , chair height (overall) +10mm 1050mm , backrest width +10mm 450 , width of seat +10mm 450 , depth of seal in of seat in mm (+/- 10 mm) 400 , heght of seat in mm (+/- 5 mm) 425 , seat finish cushioned , all exposed wooden surfaces will be melamine polished all as specified (supplier will get the sample approved before supply , from estate manager , emu dehradun) , sofa of two seater made out of 50 x 25 mm second class hard wood frame and upholstered 100 mm rubber foam in seat , back rest of 50 mm rubber foam fully upholstered with wooden arms , teak wood finish melamine polish etc all complete godrej interio aristocrat or equivalent . (supplier will get the sample approved before supply , from estate manager , emu dehradun) , sofa of single seater made out of 50 x 25 mm second class hard wood frame and upholstered 100 mm rubber foam in seat , back rest of 50 mm rubber foam fully upholstered with wooden arms , teak wood finish melamine polish etc all complete godrej interio aristocrat or equivalent . (supplier will get the sample approved before supply , from estate manager , emu dehradun) , utility table of size 900 mm x 900 mm x 460 mm , made out of 35x45mm teak wood frame work and 45x45 mm teak wood rnouled legs , top to have 19 mm thick ply with 1mm thick laminated top , edges to have 30mmx30mm teak wood moulding finished with melamine polish all complete (supplier will get the sample approved before supply from estate manager , emu dehradun) , supply of single bed of size 1950 x 930 x 325 mm made out of teak wood side of size 120 x 30 mm and foot board with 75 x 25 mm second class teak wood frame covered with 4 mm thick one side teak ply and other side 6 mm thick commercial ply on bed back side with 40 x 9 mm thick teak wood lipping on edges and 50 x 25 mm support of second class hard wood and 12 mm thick commercial ply on bed top with melamine polish on all exposed surfaces and primer coat on rest of surfaces etc. as per directed by engineer-in-charge all complete. (supplier will get the sample approved before supply , from estate manager , emu dehradun) , key box with key hooks , acrylic covered lockable key box of size 40inchx40inch with 50 nos of key hooks covered with acrylic shutter all as specified (supplier will get the sample approved before supply from estate manager , emu dehradun) , notice board , width of board in mm 1200 mm , colour (front/ display layer) green , height of board in mm 900mm , front cover material of board acrylic (minimum 2 mm thickness) , rear panel material of board galvanised iron sheet , overall pinability depth of board in mm 8 millimeter , core material thickness in mm(n greater equal 9) 9 millimeter , orientation portrait / landscape , type of front cover with lockable front cover , d

State Government

CTN :39277398

24 Feb, 2025 NA

Tirumala - Andhra Pradesh

Tender For supply of electrical materials for the financial year 2025-26 to s v s devasthanam, dwaraka tirumala-, 25mm pvc 2mm thick conduit pipes 25mm flexible pvc pipes 25mm pvc (1 way,2,3,4 way and l way) boxes 25mm pvc long bends 20mm pvc 2mm thick conduit pipes 20mm flexible pvc pipes 20mm pvc(1 way,2,3,4 way and l way) boxes 20mm pvc flats l-bends 20mm pvc long bends 19/20mm width and 12.5mm height casing and capping(double lock) 25mm width and 12.5mm height casing and capping(double lock) 40 mm width and 20 mm height casing and capping(double lock) 8 way spn db with door 4 incoming 1 out going 12 way spn db with door 4 incoming 1 out going 12 modular cover frame 12 module box (iron/surface) 8 modular cover frame 8 modular box (iron/surface) 6 modular cover frame 6 module box (iron/surface) 4 modular cover frame 4 module box (iron/surface) 3 modular cover frame 3 module box (iron/surface) 2 modular cover frame 2 module box (iron/surface) 6a/10a 1 way modular switch (mylinc and arteor) 6a/10a modular socket with shutter (mylinc and arteor) 20a 1 way modular indicator switch 20a modular socket modular switch dummy (mylinc and arteor) 5/6a switch 16a switch 16a 5 in one socket 5/6a 3 pin socket 16a switch and socket with box 20a a.c. metal clad plug and socket spike guard with 1 no switch and 4 no s of sockets 2 modular electronic fan step regulator (mylinc and arteor) 1 modular electronic fan step regulator (mylinc and arteor) electronic fan regulator (socket size) buzzer card less bell waterproof door bell chime kit alarm fr pvc electrical insulation tape 12 inches pvc cable tags wooden gutties royal plugs pvc stay wire 1/18(1 sqmm) flexible copper wire 3/20 (2.5 sqmm) flexible copper wire 7/20 (4 sqmm) flexible copper wire 7/18 (6 sqmm) flexible round copper wire 7/18(6 sqmm) alluminium wire 2.5 sqmm 3 core round copper wire 2.5 sqmm 2 core round copper wire 10 guage gi wire 16 guage gi wire 63a fuse wire 6 sqmm 2 core aluminum wire 6 sqmm weather proof twin core aluminum wire 25 sqmm 3.5 core aroured ug alluminium cable 50 sqmm 3.5 core armoured ug alluminium cable 95 sqmm 3.5 core armoured ug alluminium cable 25 sqmm aluminium lugs 50 sqmm aluminium lugs 95 sqmm aluminium lugs 150 sqmm aluminium lugs 25 sqmm aluminium joint lugs 50 sqmm aluminium joint lugs 95 sqmm aluminium joint lugs 150 sqmm aluminium joint lugs 40a 2 pole isolators 63a 4 pole isolators 100a 4 pole isolators 63a 4 pole elcb 100a 4 pole elcb 32a 2 pole elcb 63a 2 pole elcb 10a single pole mcb 16a single pole mcb 20a single pole mcb 32a single pole mcb 10a single pole modular mcb (arteor and mylinc) 16a single pole modular mcb (arteor and mylinc) 20a single pole modular mcb (arteor and mylinc) 32a single pole modular mcb (arteor and mylinc) mcb gang box with base 40/36w electronic choke 16a 3 pin plug top 6a 3 pin plug top angle holder batten holder pendent holder ceiling plates ceiling roses ceiling plates jumbo no.8 star screws of 12mm no.8 star screws of 25mm no.8 star screws of 30mm no.8 star screws of 35/38mm no.8 star screws of 50mm no.8 star screws of 63/75mm china nails (all sizes) 0w led 9w led 36w cfl (pin type) 23w led 40w led 36w tube lights 50w led warm white lights 20w led stand lights 10w led stand lights 10w bulket lamp fitting 18w round ceiling light 36w/40w (2ft x 2ft) led slim panel square fitting 28w 1200mm length led batten light 28w 1200mm length led batten warm white light 1200mm 35w led tube lights 2 feet 10w led tube lights 50w led street light luminaries 50w led high bay light 100w led high bay light 90w led street light luminaries 200w led flood light luminaries 400w led flood light luminaries 200w led flood light gold colour luminaries 70a timer switch contactor pachi rubber 100a/63a street light connectors street light control box of size 10"x8"x6" with 4 way connector,din channel,2no's of 6-32a sp mcbs,ms back clamp and painting with powder coated led driver suitable for 36w, 2 ft x 2 ft panel light led driver suitable for 45 80w, l

CTN :39290461

21 Feb, 2025 15.00 Lacs

Ernakulam - Kerala

Tender For panchayat conferance hall furniture other facilities 2 - paneling work and entrance door & door frame, providing and fixing wall paneling work using chemical treated mahagani wood. fixing 5x2.5 cm thick reaper inside the paneling, surface of paneling finished with 12 mm thick reapers. (vertical design type paneling) mat/glossy finish. (including wood panel onceiling), providing and fixing anjili wood door frame without sill of size 217x281 cm. door opening size 127x210 cm height and two end sides (45) cm width bottom paneled width anjili wood, top glass (8mm thick toughened glass and wood mat/glossy finish polish., providing and fixing anjili wood double door half paneled and half glassed shutter of size 64x205 cm-2 nos including fittings like handle, lock, hinges, door closer, door stoper, tower bolt etc.mat/glossy finish polish., window horizontal type blinds curtain work, check type design. (for site fitting), l shape settty with cousion (6 seat) for visiting room, 4 seat setty with cousion for visiting room, anjili wooden teapoy with top glass, 3 seat airport chair, gandhijis photo with charka, l shape counter table with drawer key board, daise chair into priyadarsini hall (for president), daise chair into priyadarsini hall, neelkamal arm chair (high quality vergin), front office table work and dais table (15 cm hight, 4 feet length, 2.5 feet width), "l" shape office table partition with glass sapretion with two part, supply and fixing carpet main office passage

State Government

CTN :39278115

03 Mar, 2025 NA

Kangra - Himachal Pradesh

Tender For tender for supply of wire gauge shutter - providing red marandi wood wire gauge shutter size 32 inchx79 inch including hinges tower bolt sliding door bolt etc. complete in all respect , steel chokhat , ms wooden screw , ms wooden screw , galvanized msnut bolt round head , ms door handle 6inch , ms tower bolt 8 inch , sliding bolt 300mm , door spring , aluminium sheet 28 gauge sheet , takora triangular file , ms nails without heads 0.75 inch , ms nails 2.5 inch , ms nails 2 inch , ms nails 1.5 inch , ms nails 1 inch , black tack nails 0.75 inch , gi wire mesh 24 gauge x 12 mesh , scrapper 5 inch , bit 6mm for concrete , plastic tasla , aluminium catcher , bit 6mm for wood , bit 8mm for wood imported , bit 12mm for wood imported , sand paper grit 120 number 9 inchx11 inch , mortise latch and lock with 6 levers

CTN :39237206

27 Feb, 2025 NA

Delhi - Delhi

Tender For tender for supply of placing ornamental furniture at 20 akbar road new delhi - providing & placing in position wooden tv wall panel of size approx 1740mm x 2440mm ht x 50mm thick as per approved design fixing 50mm x 25mm hollock wood batten on inside as frame of the panel , panel base shall be made up of 19mm thick commercial ply of make duro green or equivalent and fifixing 18mm thick hdhmr ply of make action tesa or equivalent on on outer exposed surface of the panel providing fluiting design on the exposed panel with the help of 25 x 10mm teak wood bidding , finally finishing exposed panel area with the help of high quality high gloss polish of make sirca or equivalent the cost including all necessary nails screws fevicol etc all complete as per the direction of engineer in charge , providing & placing in position wooden tv wall panel of size approx 2400mm x 2440mm ht x 45mm thick as per approved design fixing 50mm x 25mm hollock wood batten on inside as frame of the panel panel base shall be made up of 19mm thick commercial ply of make duro green or equivalent and fifixing 18mm thick hdhmr ply of make action tesa or equivalent on on outer exposed surface of the panel providing fluiting design on the half exposed panel with the help of 25x10mm teak wood bidding and othe half portion shall be consisting of 1mm thick laminate as per approved shade , finally finishing exposed panel area with the help of high quality high gloss polish of make sirca or equivalent , the cost including all necessary nails , screws , fevicol etc. all complete as per the direction of engineer in charge. , providing & placing of wooden wall panelling with fluiting design having 2 nos. door shutter , panelling of size approx 4460x3100mm ht , , providing & placing in position wooden tv wall panel of size approx 2345x2345mm , having bottom cabinet of size approx 2045x375x260mm ht. and open shelve cabinet of size approx 380x415x2345mm ht , , providing & placing in position wooden vanity counter of size approx 1520x540x580mm ht as per approved design and drawing , the vanity top , bottom , sides , shelve , middle partition , drawer head shall be made up of 19mm thick commercial ply of make duro/green or equivalent , , providing & placing in position wall hung wooden cabinet of size approx 2400x360x270mm ht , as per approved design , the cabinet top , bottom , side , shelve , middle partition , drawer head , unit back shall be made up of 18mm thick hdhmr ply of make action tesa or equivalent , , providing & placing in position wooden vanity counter of size approx 1535x665x870mm ht , as per approved design , the vanity top , bottom , side , front fix , drawer head , partition , shelve , upper box unit shall be made up of 18mm thick hdhmr ply of make action tesa , providing & placing in position wooden vanity counter of size approx 2240x550x710 mm ht , , providing & placing in position wooden vanity counter of size approx 820x600x560mm ht , as per approved design , providing & placing in position wooden vanity cabinet of size approx 1525x610x580mm ht. as per approved design , the cabinet top , bottom , providing & placing in position wooden vanity counter of size approx 2470x610x640mm ht , as per approved design , the cabinet top , bottom , side , partition , shutter , drawer head , , providing & placing in position wooden tv unit of size approx 3400mm x 540mm x 2360mm ht , as per approved design , the tv unit shall be having 2 nos wardrob with shutter on both side and cabinet with shutter on bottom , providing & placing in position wooden side table of size approx 460mm x 400mm x 530mm ht , as per approved design , the table top , bottom , side , drawer head , skirting shall be made up of 18mm thick hdhmr ply of action/tesa or equivalent make , providing & placing in position wooden side table of size approx 540mm x 460mm x 540mm ht , as per approved design , the table top , bottom , side , drawer head

Automatic Swing Door Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

State Government

State Government

State Government