Latest automatic voltage regular Tenders | Government automatic voltage regular Tenders

Central Government/Public Sector

CTN :45054942

11 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no. 98322000. condemned and unserviceable guillotine shearing machine with motor, pulley, back gauge, blade, drive assembly, plate clamping assembly and without electrical panel. id no.314105050, u/c no.120124001.make: batliboi and co. vide udm scrap advice note no. 012282-25-01479 dt. 17.03.26. approximate total weight - 11500 kgs [mild steel-11410 kgs, cast iron -30 kgs, brass/bronze -20 kgs, copper-30 kg, wastage-10 kgs]. note: 1. rate per number should be quoted. 2. as is where is basis. 3. cutting and dismantling is permitted. 4. crane loading is permitted. 5. digging is not permitted 6.incoming cables to the motor terminal are not for sale. 6. custodian should cut the power supply during delivery if required. 7. the total weight and break up of the total weight is approximate. railway is not responsible for any shortage of weight. 8. the purchaser may visit the machine offered for condemnation and check the site conditions for delivery feasibility before quoting the offer 9. purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment and necessary trained men. 10. the purchaser will be held responsible for any damage/fire accident caused to the railway property. 11. after completion of delivery purchaser has to keep the cutting and loading spot neat and clean. custodian: sse/mmw/goc

Central Government/Public Sector

CTN :45046076

20 May, 2026 55.41 Lacs

Chennai - Tamil Nadu

Tender For supply of temperature data logger and surge protection system and mccbs d d - supply of mccb 160a tpn with metal enclosure for ups input as per the specifications. , supply of power supply surge protection device spd 100ka 3 phase type b and c along with required accessories as per specifications for ups input. , supply of power supply series surge protection filter 3 phase 150a type b andc along with required accessories as per specifications for ups input. , supply of service change over switch 125a 4 pole for ups input surge filter bypass with metal enclosure as per specifications. , supply of type c 3 phase 240ka total rating equipment level protection series spd for ups output with required accessories as per specifications. , supply of series surge protection filter 3 phase 125a type c for ups output as per specifications. , supply of service change over switch 125a 4 pole with metal enclosure for ups output feeders bypass as per specifications. , supply of mccb 160a 4 pole with metal enclosure for ups output feeders as per specifications. , supply of ethernet based comprehensive monitoring system for earth resistance earthneutral voltage temperature and humidity as per the specifications. , supply of sub earth bonding bar as per the specifications. , installation and commissioning charges.

CTN :45040487

19 May, 2026 NA

Vijayawada - Andhra Pradesh

Tender For design, engineering, manufacturing, testing at manufacturer s works before dispatch, supply, transportation, storage at site, insura nce (transit, storage cum erection testing & commissioning), erection, testing and commissioning of 5 nos. i.e., 3 nos 238/270mw and 2 nos 118/135 mw capacity vertical francis reversible pump-turbine and synchronous motor-generator sets along with all associated a uxiliary and ancillary equipment, 400kv gas insulated switchgear, pothead yard & power evacuation structures and civil works & hydro mechanical works of kamalapadu pumped storage hydro electric project on epc (turn key) basis at kamalapadu village, yadiki mandal, ananthapuramu district, andhra pradesh

CTN :45024279

12 May, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of replacement of defective or senseless with compatible multi sensor smoke detector , xipe cross linked polythene thermostatic cable cable multi core , laying charges for cable including fire proof pipe , compatible addressable manual call point , compatible addressable sounder and strobe , online power backup source 1000va 60min 4 no 62 ah battery , addressable panel external surge supply with spd integration including 0.2 ohm rapid release surge cancellation device including wiring , installation and configuration , fire bell with manual call point including installation and electrical socket with wiring , annual maintenance contract for existing infrastructure of afds for 03 panel and allied equipment

Central Government And Public Sector

CTN :44846089

06 May, 2026 94.44 Lacs

Chandigarh - Chandigarh

Tender For corrigendum : supply of supplying of 1.5 tr nominal capacity invertor type metal body , installation, testing and commissioning of of 1.5 tr inverter type ductable air cooled split ac unit as per item no.1 above in equipment room , providing and fixing heavt duty powder coated m s stand of suitable size made out of suitable guage ms shee , supply and fixing of 3 core 2.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply and fixing of 4 core 1.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply installation testing and commissioning including vaccumiazation and nitrogen testing of , supply installation testing and commissioning including vaccumiazation and nitrogen , supplying and fixing of 25 mm sizes of rigid upvc piping from outlet socket of ac unit complete with elbow , supplying and fixing dp sheet steel enclosure on surface or recess along with 25 or 32 a 230 v c curve dp mcb , supplying and fixing 5 amps to 32 amps rating, 240 or 415 volts c curve miniature circuit breaker suitable for inductive load of single pole and neutral , providing and fixing supply air grills of powder coated aluminum construction having a free area of not less than 70 percent without volume control dampers , supplying and installing of 150 mm width 50 mm depth 1.6 mm thickness nominal size of perforated hot dipped galvanised iron cable tray

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Central Government / Public Sector

CTN :45037447

09 May, 2026 NA

Hyderabad-T - Telangana

Tender For supply of following set of items for pantograph testing facilities at lgds 1) voltage source of 0-140v dc output varying from 0to 140 v in steps of 5v (incoming voltage is 230v ac) qty 01 no 2) isolation transformer 1:1 input 230v & output 230v ac qty 01 no 3) power connector for testing equipment qty 01 no 4) information boards of size 6x4 qty 06 nos 5) floor display stand qty 01 no 6) set of handling utility for testing equipment qty 01set. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44895289

16 May, 2026 87.38 Crore

Bengaluru - Karnataka

Tender For corrigendum : establishing 2x150mva, 220/66/11kv,1x12.5mva,66/11kv substation at dyagerahalli (infosys campus) in sira taluk & tumkur district.(2)construction of 66kv dc line with panther acsr conductor from 220kv dyagerahalli (infosys campus) sub-station for a distance of 16.77kms to existing 66kv bevinahalli substation in sira taluk & tumkur district.(3)construction of 66kv dc line with panther acsr conductor from proposed 220/66/11 kv dyagerahalli (infosys campus) substation to existing 66kv ranganathapura sub-station for distance of 11.691kms in hiriyur taluk & chitradurga district.(4)construction of 66kv dc line with panther conductor for a distance of 0.323kms from 220/66kv dyagerahalli (infosys campus) sub-station to existing 66kv j g halli by utilizing 02 nos of existing 66kv line that were operated for evacuating 40mw solar power to 66kv j g halli sub-station and terminating it to 220/66kv dyagerahalli (infosys campus) substation in hiriyur taluk and chitradurga district.(5)construction of 2 nos of 66kv terminal bays at 66kv bevinahalli sub station in sira taluk, tumkur dist.(6)construction of 2 nos of 66kv terminal bays at existing 66kv ranganathapura sub station in hiriyur taluk, chitadurga dist on partial turnkey basis including supply of all matching materials/equipments (excluding supply of 11kv switchgear and 12.5mva power transformer) and erection (including dismantling and civil works) of all materials/ equipment, testing and commissioning.

State Government

CTN :44362179

30 Apr, 2026 18.39 Crore

Bengaluru - Karnataka

Tender For corrigendum : supply of accessories/ consumables/ spares for medical equipment - temperature cable for blt monitor part no 15-031-0066, accessories stand,wall mount for blt monitor part no 15-031-0099, nibp hose cable for blt monitor part no 15-031-0008, nibp cuff adult for blt monitor part no 15-100-0118, spo2 sensor clip type (one piece)for blt monitor part no 15-100-0358, spo2 sensor clip type for blt monitor part no 15-100-0320, spo2 analog extension cable for blt monitor part no 15-100-0357, five-5 lead ecg cable set clip type for blr monitor part no 15-031-0022, five-5 lead ecg cable set snap type for blt monitor part no 15-031-0002, three-3 lead ecg cable set for blt monitor part no 15-031-001, rs232 communication board for schiller tmt machine (stmt), kit screw stickers epure- sav-01-0024 for ot light, model epure, ball values for drain for-ultrasonic instrument cleaner, epure keybord- sav-01-0025 for ot light, model - epure, analog timer for ultrasonic instrument cleaner., cover glass 1 complete set for famed -mobile lamp., reusable bipolar with fixed plug , 3m-for electro surgical unit (cautary unit) make- eschmann, model- td830, mattress head section (50mm) t20-431-0001), vpx exhaust hose part no-216018 for eschmann suction unit -1no, compressor for sarns tcm ii, battery li-ion - schiller ecg machine, kit sp2 x battery 12 v,80 w hrl 1280 w-part no 001-20-0058, three axis pcb for ot table make- eschmann , model t20a & t20a+ installed at major ot, vpx valve hose part no-216013 for eschmann suction unit, vpx vacuum gauge part no-743077 for eschmann suction unit, vpx vacuum control valve part no-216059 for eschmann suction unit, vpx manifold hose part no-216016 for eschmann suction unit, vpx handle bar grip part no-216076 for eschmann suction unit, vpx gauge hose part no-216014 for eschmann suction unit, thermal print head for schiller ecg machine, hv board for defibrillator dg 400 for schiller defibrillator, recorder paper for schiller defibrillator, thermal printer head with rollar for schiller defibrillator, battery for schiller defibrillator, recorder pcb for schiller defibrillator, adult contact plate for schiller defibrillator, left and right keypad for schiller defibrillator, left and right keypad pcb for schiller defibrillator, paddle pcb for schiller defibrillator, encoder knob for schiller defibrillator, smps module for schiller defibrillator, relay interface board for schiller defibrillator, lcd for schiller defibrillator, hv board 200j for schiller defibrillator, wooden platform for schiller tmt machine (stmt), walking belt for schiller tmt machine (stmt), nibp tube 3m-reusable-2601195 for monitor, model- vista-120, make- drager, smps for schiller tmt machine (stmt), relay board for schiller tmt machine (stmt), opto coupler - speed for schiller tmt machine (stmt), opto coupler - elevation for schiller tmt machine (stmt), main transformer for schiller tmt machine (stmt), main motor for schiller tmt machine (stmt), iu pcb for schiller tmt machine (stmt), interface cables edc to iu, tmt to iu for schiller tmt machine (stmt), eprom for schiller tmt machine (stmt), elevation motor for schiller tmt machine (stmt), edc pcb for schiller tmt machine (stmt), ac drive unit for schiller tmt machine (stmt), ten lead patient cable for schiller tmt machine (stmt), expiratory valve for evita, reusable-8410580, safely disk for maquet (datascope) iabp machine- data scope, recorder board for maquet (datascope) iabp machine- data scope, purge assembly for maquet (datascope) iabp machine- data scope ., pressure transducer cable for maquet (datascope) iabp machine- data scope ., power supply module for maquet (datascope) iabp machine- data scope ., motor controller pcb for maquet (datascope) iabp machine- data scope ., modem board for maquet (datascope) iabp machine- data scope ., main cpu pcb for maquet (datascope) iabp machine- data scope ., front end pcb for maquet (datascope) iabp machine- data scope., fill assembly for m

CTN :45027205

19 May, 2026 60.00 Lacs

Delhi - Delhi

Tender For supply of daikin make vrf system under buy back d d - daikin make vrv outdoor unit 10 hp , daikin make vrv outdoor unit 12 hp , remote fxmq250mve6 ,8,2tr , remote fxmq200mve6 ,6,5tr , fxmq125pve6 ,4,1tr , fxmq200mfv1 ,tfa,6,5tr , fxfq63pve9 ,4 way cassette unit,2tr , fxfq50pve9 ,4 way cassette unit,1,6tr , fxfq32pve9 ,4 way cassette unit,1tr , fxfq100pve9 ,4 way cassette unit, 3,2tr , 1,8tr , 1 star cooling only , non inverter ac, gte60uv16u2 , pipe sizes 34,9 mm o,d 19 mm thick insulation , pipe sizes28,6 mm o,d 19 mm thick insulation , pipe sizes22,2 mm o,d 19 mm thick insulation , pipe sizes19,1 mm o,d 13 mm thick insulation , pipe sizes15,9 mm o,d 13 mm thick insulation , pipe sizes12,7 mm o,d 13 mm thick insulation , pipe sizes9,5 mm o,d 13 mm thick insulation , pipe sizes 6,4 mm o,d 13 mm thick insulation , odu and idu, 2cx1,5 sqmm in rigid pvc frls conduit , power cabling for indoor units 4cx1,5mm , sitc of thimble and lugs , acoustic lining for duct open cell insulation 10mm , ms stand with vi rubber pad for outdoor unit 10hp , ms stand with vi rubber pad for outdoor unit 12hp , ms stand with vi rubber pad for outdoor unit 1,8 tr , coating for equipment for outdoor unit , coating for equipmentfor indoor unit upto 4,1tr , coating for equipment for indoor unit above 4,1tr , coating for equipment hi wall split unit odu and idu , insulation of exposed existing cu pipe on terrace , 24 guage ducting as per requirement , canvass connection , 13mm insulation xlpe classo on existing duct

Automatic Voltage Regular Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government / Public Sector

State Government

State Government