Latest auxiliary motor Tenders | Government auxiliary motor Tenders

Central Government/Public Sector

CTN :38005126

18 Nov, 2024 45.72 Lacs

Mundra - Gujarat

Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government / Public Sector

CTN :38154298

28 Nov, 2024 NA

Multi City - Multi State

Tender For supply of terminal block assembly complete for auxiliary motors (mvmt/mvrh/mpv) to ref nos. 1 to 7 as per s.c.rly drawing no. a3/el/conv/2682.

CTN :36133144

26 Nov, 2024 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of wss water supply scheme ppr pipe pn 20 sdr6 3 layer with outer dia 50mm , ppr pipe pn 20 sdr6 3 layer with outer dia 40mm , ppr pipe pn 20 sdr6 3 layer with outer dia 32mm , 50mm gate valve , 40mm dia gate valve , reflex bypass valve , 50mm dia socket , 50mm tee , 50mm dia elbow 90 degree , 50mm dia union , 40mm dia socket , 40mm dia elbow 90 degree , 40mm dia union , 40mm tee , 50mm tank nipple , 40mm tank nipple , 50 by 40mm reducer socket , puf water tank 2000 ltrs , 5 hp motor pump centrifugal pump -

Central Government/Public Sector

CTN :38124295

13 Nov, 2024 NA

Ratlam - Madhya Pradesh

Tender For supply of set of circlips for auxiliary motors as per is 3075 (part1) . 1986 or latest. each s et consists of 03 items 06 nos. 1) circlip for mvrh / mvmt with d1- 65mm, s- 2.5mm, d3- 60.8mm. qty-02 nos. 2) circlip for mcp with d1- 50mm, s- 2mm, d3- 45.8mm . qty-02 nos 3) circlip for arno with d1- 80mm, s- 2.5mm, d3- 74.5mm . qty-02 nos . (d1 . shaft diameter, s . thickness circlip, d3 . internal diameter of circlip as per is 3075 part . 1 .1986 or latest. [ warranty period: 30 mont hs after the date of delivery ]

Central Government/Public Sector

CTN :38109774

21 Nov, 2024 NA

Itarsi - Madhya Pradesh

Tender For supply of ball bearing 6308 c3 for 03 phase wap-7/wag-9 locomotives auxiliary motors (mrb mak e cgl) [ warranty period: 30 months after the date of delivery ]

CTN :38110589

20 Nov, 2024 NA

Adra - West Bengal

Tender For supply , testing, and commissioning of 10 hp 8 stage submersible pump with motor suitable for 150mm bore ,outlet dia -2.5inch, total head - 135 mtr, discharge at 70 mtr 380 lpm with one number he avy duty reducer socket 3"x2.5" ..make- kirloskar [ warranty period: 30 months after the date of deliver y ]

Central Government/Public Sector

CTN :38106884

21 Nov, 2024 NA

Multi City - Multi State

Tender For overhauling of auxiliary motors of 3 phase wap7/wag9 electric locomotives of diesel loco shed kjm for a period of 2 years

CTN :38110082

13 Nov, 2024 NA

Multi City - Multi State

Tender For supply of set of braided copper earth shunt for auxiliary motor for wag-9 locomotives. one set of con sisting of 10 items in 22 nos. as per annexure attached. [ warranty period: 30 months after the date of d elivery ]

CTN :38110084

13 Nov, 2024 NA

Multi City - Multi State

Tender For supply of earth shunt for auxiliary motor as per els/rpm drg no. m/els/rpm/sk-287. [ warranty peri od: 30 months after the date of delivery ]

CTN :37707500

13 Nov, 2024 75.61 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : tn-mm-2004 supply of hs and ls couplings and their spares for tube mill bbd 4772 at sstps suratgarh - supply items, hs coupling type lgf-685 v, nstd make rathi for ball tube mill bbd 4772 along with grid spring, horizontal cover with nut bolts and washer in fb and kw motor side 160mm;reducer side 140 mm(coupling between main motor and main reducer), nut bolts and washer for hs coupling between main motor and main reducer type lgf-685 v, nstd make rathi for ball tube mill bbd 4772 along with grid springs (one set consist of complete set of fasteners for one complete assembly), ls flexible geared coupling with fasteners as per drawing for ball tube mill bbd 4772(lgf-115) nstd, set of fasteners(bolt, nut & washers) for ls flexible geared coupling lfg-115) nstd as per drawing for ball tube mill bbd-4772(one set consist of complete set of fasteners for one complete assembly)

Auxiliary Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector