Latest backing plate Tenders | Government backing plate Tenders

Central Government/Public Sector

CTN :43308272

12 Jan, 2026 NA

Mysore - Karnataka

Tender For supply of contactor with surge suppressor for 60kva transformer, rated current: 95a, rated voltage: 690v ac, 50/60hz, main pole: 04 nos., aux. contact: 2no + 1nc, control circuit voltage: 230v ac +/-30% (168-300v ac) with plate & rail mounting support confirming to standard iec/en 60947. place of installation: s1k44 in switch board cabinet of lhb ac coach as per rdso spec. no. rdso/pe/spec/ac/0184-2015 (rev.1) or lat. and rdso ltr. no. el/7.1.108/mssbc dt.: 17-09-21. make as per bom are abb cat. no.af 116b-40, schneider cat. no. lc1d1150046m5+la4da2u or any other rdso approved make.

Central Government/Public Sector

CTN :43308503

02 Feb, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of s.s.inlay support plate size 1250x150x2 mm

State Government

CTN :43306393

14 Jan, 2026 49.00 Lacs

Chandigarh - Chandigarh

Tender For supply of ot table for robotic surgery , split leg section detachable , foot pump , restraint body strap , remote controller , head rest , arm board with pad and clamp , motorized upper back section , anesthesia screen with clamp , body strap , leg plate , seat section to extend by approx 420 mm for urological interventions fully radio lucent with sst side rails 25 into 10 mm , swivel mounted rinsing basin with holder , goepel knee crutch , radial setting clamp , bracket for body supports , back buttocks support , pubis sacrum sternum support , lateral support , flexible arm rest with clamp , cmc for 1st year , cmc for 2nd year , cmc for 3rd year , cmc for 4th year , cmc for 5th year , cmc for 6th year , cmc for 7th year , cmc for 8th year , battery rate to be frozen during warranty and cmc , table top foam rate to be frozen during warranty and cmc , remote controller including batteries and cells rate to be frozen during warranty and cmc

Central Government/Public Sector

CTN :42882114

26 Dec, 2025 NA

Goa - Goa

Tender For corrigendum : supply of additional cable fasteners 14 : -ta sl no 4 1 strap p pc code 6488522032 refer annexure 1 , ta sl no 4 2 strap p pa code 6488522034 refer annexure 2 , ta sl no 4 3 strap p pcc code 6488522051 refer annexure 3 , ta sl no 4 4 plug code 935966200400 refer annexure 4 , ta sl no 4 5 roller assembled code 935921920800 refer annexure 5 , ta sl no 4 6 plate code 935972305800 refer annexure 6 , ta sl no 4 7 support code 935972305900 refer annexure 7 , ta sl no 4 8 bracket code 935972306100 refer annexure 8 , ta sl no 4 9 bracket code 935972306400 refer annexure 9 , ta sl no 4 10 bracket code 935972306700 refer annexure 10

CTN :43171454

25 Dec, 2025 1.38 Lacs

Jalpaiguri - West Bengal

Tender For bid to ras supply of 3d shine board-- letter , logo , special character , base plate , iron angle , support angle , squire pipe , acp board

State Government

CTN :42914992

29 Dec, 2025 28.64 Lacs

Sarni - Madhya Pradesh

Tender For corrigendum : procurement of spares for aph (model 27.5vitm 2000 72 degree pa) of 2x250mw unit no.10 and 11 of stps sarni. - spares for air preheater ( model 27.5 vitm 2000 720 pa ) of 2x250mw units., inboard & outboard static seals for hot end sector plates; (one set = requirement for 1 aph),, inboard & outboard static seals for cold end sector plates; (one set = requirement for 1 aph),, cold end grating (one set = requirement for 1 aph),, t-bar including t - bar pin, t- bar tab and t- bar clip for hot end, taper lock bush of o/p shaft of main drive gear box, kao wool packing, packing rope for air sealing cover assembly (guide bearing), packing rope for air sealing cover assembly (support bearing), 50 mm gun metal valve thread connection for los working pressure 5 kg/cm2, 25 mm gun metal valve thread connection for los working pressure 5 kg/cm2, rotor angle he (one set = requirement for 1 aph),, soot blower pipe along with nozzle assembly, filter for air motor 1" bsp, relief valve(die casting)22 mm for lube oil system, working pressure 5 ksc, one end is56mm & other end is 46 mm, make-corona or equivalent., lubricator for air motor 1" bsp, wash pipe assembly for hot end & cold end with ss nozzle(one set consist of 02 nos. ), steel wire rope preform, ungalvanised steel wire rope core iwrc/steel core as per is 2266/2002, tensile strenght-1770 n/mm2, length:70 meter, dia. of rope- 6 mm, construction 6x19, make-usha martin or equivalent., by pass seal bar assembly (one set consist of 1 hot end by pass seal bar -03 nos., 2 cold end by pass seal bar-03 nos.), hot intermediate end support grating plates, shoot blower warm gear box, air motor model no ir92ra014,5.51:1 make: ingersol rand or equivalent, pin rack assembly, guide bearing air seal assembly (consist of followings aluminium seal assembly (upper) -01 no. aluminum seal assembly (lower) -01 no. spring -06 nos. bolt-06 nos. nut-06 nos. locknut-06 nos. washer-18 nos. pin-02 nos. seal ring retainer-01 no., hot end sector plates including static seals on both side (along with fasteners) and tracking arrangements for inboard and outboard side for aph.one set consist of 03 nos sector plate i.e.a) sector plate fg to sab) sector plate fg to pac) sector plate sa to pa

CTN :43166123

30 Dec, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : procurement of gear box spares - gear box spares, pressure gauge, filter element, pressure valve, valve non return rhu 25 sr bar, casing nut, pin threaded with stud, ring sealing shaft 230 x 260 x115, cylindrical bolt with spring ring a, cyl bolt m 30b x 110, din 912, cylindrical bolt b, antifriction bearing, anti friction bearing qj234, anti friction bearing nu 1044, anti friction bearing nu 22319 c, shaft sealing ring 115x114x13, coil distributor e28, wheel a, wheel b, threaded pin a, cylindrical bolt c, pin tapered, ring nut, locking pin, hexagon bolt with spring washer a, anti friction bearing nu 22320c, bush a, hexagon bolt with spring ring a, anti friction bearing a, bush c, hexagon bolt with spring ring b, locking plate a, hexagon bolt with spring washer c, ring sealing shaft 340 x 380 x 20, ring, spring a, locking plate b, threaded pin with nut, pin gapered with nut, clutch support, valve non return r 1/2" v-4-20 6919, spring washer c, piston annular, ring piston 470 x 437 , 4 x 10, ring locking a, disc inner 3-002-340-78-151, disc outer 3-100-210-78-78-005, pin carrier, carrier 4.223 20868/01, bolt cylindrical, clamping sleeve, plug screw, spring washer d, screw cyl m 16 x 120 din 912, spring sk 4.20.7207, hexagon screw w, anti friction bearing 22326c, bush 340x 300 x 92, anti friction bearing, anti friction bearing 29352, bush b, threaded pin b, cylindrical bolt with spring ring d, circlip, key fitteda, cylindrical bolt d, shaft nut, hexagon screw x, anti friction bearing qj243, bearing anti friction, anti friction bearing nu 236e, ring locking, clamp ring, control valve, valve slide, spring, threaded pin c, fitted key, fitted key 32x18x110, bush, fitted key b, threaded pin d, nut shaft, locking bolt, key fitted d, threaded pin e, fitted key c, bush 230 x 200 x 83, cylindrical bolt f, key fitted e, cylindrical bolt with fspring ring g, threaded pin f, bush 1

Central Government/Public Sector

CTN :43280186

30 Dec, 2025 NA

Bokaro - Jharkhand

Tender For onsite technical support for chequered plate rolling in hot strip mill.

CTN :43250919

25 Dec, 2025 NA

Parganas - West Bengal

Tender For supply of spare parts for greave - clip part no 123209770025, adaptar air intake 90 degree part no 123203552395, adaptar air intake 90 degree part no 123203552135, adaptar m 26x1.5m- m16x1.5 part no 123203552044, adaptar on lub oil sump part no 123203552155, angle plate part no 623206500294, bush part no 123203302094, disc, washer part no 623404300714, holder for alternater part no 123206300994, lub oil filler neck part no 123207430185, cooling water pipe a bank part no 123209120435, cooling water pipe b bank part no 123209120445, elbow ( turbocharger) part no 623209520234, pinion and bearing part no 90308590, returning spring part no 1100585186, support angle part no 123206501874, washer part no 623403400494

CTN :43292459

04 Feb, 2026 NA

Izatnagar - Uttar Pradesh

Tender For supply of wear plate liner for yoke pin support plate as per as per drawing no. wa/bd-4462 item no. part-a alt. 8 & specification no.-wd-70 bd-10 rev.-4. is:3885 part-1 grade iv. (hardness 262-302 bhn).

Backing Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector