Latest bagasse carrier chain Tenders | Government bagasse carrier chain Tenders

Corporations And Associations And Others

CTN :36269893

06 Jun, 2024 NA

Jalandhar - Punjab

Tender For supply of chain and its spares - chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both side )as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, supply of cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. . mh pcc r1, inner link r.h. & l.h. as per drawing no. . mh pcc r1, cane carrier slates as per drg no. . mh pcc r1, supply of inter- rack carrier chain & its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, roller as per drg no. ce/mh/503, pin as per drg no. ce/mh/503, outer link as per drg.no. ce/mh/503, inner link as per drg.no. ce/mh/503, side attachment link as per drg.no. ce/mh/503, supply of sec. carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, roller as per drg no. ce/mh/503, pin as per drg no. ce/mh/503, outer link as per drg.no. ce/mh/503, inner link as per drg.no. ce/mh/503, side attachment link as per drg.no. ce/mh/503

Central Government/Public Sector

CTN :35100972

30 May, 2024 NA

Mumbai - Maharashtra

Tender For bid to ras supply of - pr no 10074334 buckets for dap elevator 310003116(q3) , pr no 10074334 buckets for dap elevator 310003117 , pr no 10074334 chain for dapelevator -310003118

CTN :36211818

06 Jun, 2024 NA

Jalandhar - Punjab

Tender For tender of "machinery spares"- v-pulley for continuous machine, forge steel (40c8, is:1570-1979) trolley wheel 200 mm, forged steel (40c8, is:1570-1979) bridge wheel 400mm, ms seed elevator bucket, chain pulleys for soot blowers, pin bush coupling for rbc ,shaft of id fan, carrier shaft, ci idler pulley, ci idler pulley having collar, gear for magma mixer

CTN :36189371

28 May, 2024 NA

Thanjavur - Tamil Nadu

Tender For purchase of spares for bagasse elevator chain - spares for bagasse elevator chain dimension and materials are to be followed as per our drg. aasm/mech/mh-16, outer plate (part no : ii), outer plate (part no : iii), inner plate (part no : i), pin (part no : iv), bush (part no : v), roller (part no : vi)

CTN :36164455

22 May, 2024 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2024-25 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin)

CTN :36129536

13 May, 2024 NA

Sagar - Madhya Pradesh

Tender For supply of switch,door contact 230vac 2a , sensor,magnet 100vdc 150vac d12mm , guide shoe liner,16mm 120x41x27.5 f/kone , electronic box,ip54 d2r2 amd f/kone , motor,door drive 2 coupler right , coupler, lock railing 2 centre opening , guide shoe liner,16mm 140x30x29.4 f/kone , locking pin,nylon pa6 , toothed belt,l2250mm h3.8mm f/kone , roller,hanger d94mm w=19mm pac of 4 , limit switch,k-40 , sensor,magnet 250vdc 250vac 3a d12mm , roller unit,lock f/kone , support,toothed pulley d43mm f/kone , door glide shoe-amd,nylon-6 f/kone , synchronization rope assy,7x19x4000mm , roller,lock d31.5 w=23mm r2 , roller belt drive,pn:km501960093g01 , guide shoe liner,10mm 140x30x30 , pin,motor coupling , antilift roller,d10 , rope diverting pulley,rh w bkt f/kone , pulley,rope diverting,lh w bkt f/kone , pit switch assy,1 nc 230vac , blower assy,mr26 winding unit f/kone , axial flow fan,300mm sweep ebm papst , hook,lock ip54 right opening r2 f/kone , hook, lock ip54 left opening r2 , guide assy,comp cable roller car endkone , rope,closing wt assy d1.6 l=2900mm , transformer,drive2 115v/225v/385v , brake shoe w liner,mr26 , break magnet,mr26 f/kone , compensation chain,wf40/ql40 , rope, f819 s fe 13nat8x19s+fc1570rh , curtain of light,84 beams e10 2d col , tivela oil-s220 f/kone , roller unit,d31.5/16mm w=23mm,f/kone , guide shoe liner,10mm 120x41x27.5 f/kone , pcb,lcedrv board for elevator , lcecpu40 assembly for elevator , pcb,lceccbs board for elevator , pcb, lceados board 230v for elevator , pcb, lcecob cop, new lon, coated , lcefcb assembly for elevator , lcegtwo2 assembly for elevator , pcb,lcerec rectifier 230v for elevator , braking unit,cdbr-4045b for elevator , transformer,650va r500l for elevator

Co-operative

CTN :36120732

15 May, 2024 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s.item on conversion/ supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin for taxmaco as per sample/ drg., c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.strash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, chief engineer

Co-operative

CTN :36104844

13 May, 2024 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection works - replacement of 2 x 2 square bar rail fitted on cane unloader. removal of old juice gutter of a mill, making a new one and giving successful trial. old m.s. of a mill. extracting juice tea and m.s. a. making a new gear guard from the plate and installing it. a. making a new gear guard in the mill house. a. welding the cut teeth of the mill pinion as per requirement and smoothening it with a grinder. a. repairing the damaged/worn part of the tail war coupling by bandaging as per requirement. grinding: repairing the damaged/worn part of tail war by bandaging as per requirement and grinding it in d.s. m. to completely repair the screen, cut out the melted part, make a new one and fit it and repair all the pipes inside and give a successful trial. the slates of the cane carrier along with the links, pins, rollers, bushings fitted in it are completely repaired. cleaning and greasing the said equipment in the slate and fitting them in place. a. completely cleaning the slates, links, pin bush and rollers of the primary/secondary can carrier chain and after greasing, tying the chain spares and preparing the chain as per the instructions. .a. making and installing juice ring for roller. .a. making and installing mill bearing guard from 3 mm plate. .a. m.s. for under feed roller. making and installing scraper. a. cutting chevron grooves as per requirement in the old mill roller. a. cutting chevron grooves as per requirement in the new mill roller. a. making dots on the top and feed rollers of the mill with arcing electrode as per instructions. a. removing worn out under feed rollers. ms in place of teeth. installing new teeth by cutting the spindle from the plate. arcing by electrode as per the instructions on the grooves of the rollers used in a mills. 3 mm for a mill rollers. making side juice guard as per the instructions from the plate. making under feed roller as per the drawing for a mill. dismantling the damaged/defective juice tank of a mill house, making a new tank in its place and giving trial. replacement/repair of damaged parts of damaged/defective juice tank.a dismantling and replacement of bottom plate of damaged/defective juice tank of mill house.a cane carrier/bagasse carrier/bagasse elevator/gross bagasse carrier/r. b. removing the gully side plate of c. and installing a new plate. welding or forging the bay holes of the links of a cane carrier/bagasse carrier etc. as per the size of the pin. a cane carrier/enter carrier/bagasse elevator/return bagasse carrier. / removal of broken runners of cross bag carrier and installation of new runner in place. a. removal of old damaged slates of cane carrier and installation of new slates. work of making holes in new slates of a cane carrier/inter carrier. slates of a cane carrier. a. to repair the damaged and weak hood of cane chopper, cutter and fibrizer as per the instructions. a. to remove the old damaged slats of can carrier and to straighten the damaged slats and remove the damaged part of the slats and according to the size. cutting pieces of new/old slate and repairing them by balding and preparing slates as per size. balding the holes of the links of an inter carrier and drilling them to size as per the size of rivet. balding the holes of old slates of an inter carrier. filling the holes by welding and drilling new holes as per the drawing. removing the damaged band of the inter carrier clutch bolt and making a new one and giving a satisfactory test. removing the damaged juice dispenser bearing on the mill. and make and install a new one. make and install oil pan for a mill pinion. a.m.s. new ds from plate m. to complete the fabrication as per the screen drawing, install the new mesh, install the required pipe nipples etc. as per the drawing, make and install a new screen conveyor for the juice of the mill house from pipe line and plate and then run and test it. providing oil. to fabricate new bagasse screw conveyor as per drawing. a. to ma

Bagasse Carrier Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector

Co-operative

Co-operative