Latest bakery equipment Tenders | Government bakery equipment Tenders

State Government

CTN :40314448

14 Aug, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of ht motors spares for emd-1,wtps,gsecl. - skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic jack with pump & accesories capacity: 100 mt., hydraulic jack with pump & accesories capacity: 50 mt., greasing pipe for ht motors - r1 type hydraulic hose pipe ( rubber hose with single inner wire braiding), araldite 180 gram/tube, red insulating varnish-class f epoxy insulation & protection coating., dr. back make backtol red in 1 lit. tin varnish, digital multimeter 4.1/2 digit (true rms), digital clamp on meter lcd display with backlight, 3-3/4 digit., digital megger (insulation tester) dual voltage 500/1000 v 0 to 2000 megaohms resolution of 1 m? weght: 500 gm approx., analog multi range insulation tester.hand driven type,voltage range-250v/500v/1000v., brass connectors for pstb of ht motor, plastic dori (sutari) for binding of plastic ,0.5 thick &2mm width., insulating cable gland for pstb of ht motor, grease gun, fevicol sr 998 (200 ml/tin), self fusing rubber tape black , class b , 31 kv die electric strength , size 2.5 cm x 10 mtr., pvc tap roll, insulating box for pstb for ht motor, ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink:50 mmdia. after shrink :20 mm, heat shrinkable sleeve,size:45mm/18 mm( for 240/300 sq.mm )for 11 kv, 6.6 kv busbar /cable couductor protection heat shrinkable sleeve dia .before shrink: 75 mm dia. after shrink : 28 mm for 11 kv ht cable, z 801 fast steel epoxy stick (1 stick - 114 grm), impact wrench power/battery operated, cordless screw driver power/battery operated, w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll, becktol gray varnish in 1 ltr tin dr.back make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v

Central Government/Public Sector

CTN :41275003

21 Aug, 2025 12.50 Lacs

Dakshina Kannada - Karnataka

Tender For supply of elcometer coating equipment

State Government

CTN :41219129

02 Aug, 2025 12.68 Lacs

Delhi - Delhi

Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts

CTN :41192235

08 Aug, 2025 13.23 Lacs

Gwalior - Madhya Pradesh

Tender For purchase of gym equipment file no. 106/24x2/10, 4th call - ac motor - 4.5hp/8hpspeed - 1.0-22.0 kmphincline - 0-20% automaticrunning area - 1620x600 mm, 65x24 inch (approx)user weight - 200kg max, fly wheel - 20kg fly wheelsteel wheel - transportation wheel for easy transportuser weight - 150kg max, fly wheel - 18kg fly wheelbrake - fiction breaking system & emergency locksaddle - horizontally & vertically adjustiblehandle bar - vertically adjustable user weight - 150 kg max, square tube - 50x100mmweight stacks - 40 kgnw/gw 60 kg/ 66 kg, minimum size - 1570x660x700 mmcaps - all caps are in round metalnw/gw - 21.2kg/22.6kg, monitor - time speed distance calories ressistance - wind resistance rowing machines with 10 levels adjustment machine size - 2350x630x360 mmuser weight - 230 kg maxnw/gw 31kg/37kg, frame size - 50x70 mm squareweight stack - 110lbs x 4 (440lbs) plastic coating weight (pvc) plates & cast cement insidemachine - high density upholstered seat & back pads high intensity navigation durable wire steel with 6 mm diameter, tube - high strength steel tube precision weld cable - internally lubricated cable 6 mm square tube 50x100 mm (2.5 mm thickness) cover - with both side full metal seat cushion - 65mm thickness caps - all caps should be in metal size - 1650x1030x1630 mm weight stack - 110kg (steel) nw/gw - 257kg/291kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100mm (2.5mm thickness) seat cushion - 65mm thickness, caps - all caps should be metal, size - 1500x710x990 mm, type - plate loaded machine, nw/gw - 52kg/63.6kg, tube - high strength steel tube precision weld, cable - internally lubricated cable 6 mm, coating - two round powder coating, square tube - 50x100mm, thickness - 2.5mm, size - 1140x940x1370mm, weight stack - 100 kg (steel), machine weight - 190 kg, tube - high strength tube precision weld, machine - high quality functional trainer, coating - two round powder coating, type - fully commercial, cable - 6 mm, weight stack - 100x2 kg, machine weight - 350 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube 50x100 mm (2.5mm thick), size - 1400x680x420 mm bench weight - 30 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100 mm (2.5mm thick), size - 1650x680x1000mm nw/gw - 40kg/46.2kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1060x680x1000mm nw/gw - 21kg/24.8kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1380x680x690mm nw/gw - 34kg/40kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1320x840x970mm , bench weight - 75 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100m (2.5mm thick), size - 1800x600x800mm , bench weight - 115 kg, tube - high strength steel tube precision weld, coating - two round powder coating, square tube - 50x100mm (2.5mm thick), size - 1500x700x100mm, rack weight -75 kg, frame tube - flat oval 50x100x2.5t, square tube - 50x2.5t, cushion 1 - 895x360x55mm, cushion 2 - 455x205x55mm, cushion 3 - 550x520x55mm, cushion 4 - 454x408x55mm , cushion 5 - 250x140x80mm, size - 225x1357x1385mm, type - plate loaded machine, nw/gw - 259kg/298kg, frame tube - rectangular tube 50x80x2.5t, size - 1995x1910x2350mm, weight stack - 80x2 = 160 kg, net weight - 360 kg, size - 2.5kg, 5kg, 7.5kg, 10kg, 12.5kg, 15kg, 17.5kg, 20kg, 22.5kg, 25kg, 30kg, size - 10kg, size - 7.5kg, 10kg, 12.5kg, 15 kg, size - 3feet, 4feet, 5feet, 6feet, size - 3feet, 4feet, size - 18 inch, tricep handle, tricep rope, rod stand, size - 1kg, 2kg, thickness - 38mm, length - 15m, curl rod olympic 3 4, pushup stand, olympic weight dead lifting, skipping rope,

Central Government/Public Sector

CTN :40996442

05 Aug, 2025 NA

Numaligarh - Assam

Tender For corrigendum : supply of deluge system equipment for msb unit for nrep - a. deluge water spray systems (mvws system + water curtain system + hvws system)cs deluge valve with dry pilot trim & electric release trim, horizontal inlet & horizontal outlet, without skid, ul/fm approved, complete with dry pilot trim with test, alarm & drain devices, local deluge valve control station (dvlcs) (1 no. per dv), pressure transmitters (02 nos per dv.), 3/3 way sil2 certified intrinsically safe solenoid valve-24v dc (1 no. per dv), pressure gauges (03 nos. per dv), air filetr regulator (afr)(1 no. per dv), air vessel of adequate capacity (1 no. per dv), etc. in compliance with the scheme shown in attached "technical data sheets for fire fighting & safety equipment (tk-1p21a-sa-dat-0001)".the deluge valves shall be supplied with the trim and associated instruments duly assemblied with the deluge valve and with suitable packaging to avoid damage during transportation. the upstream strainer, block valves and by-pass valve including the pipes connecting to these items are not in bidders scope of supply.all items shall be suitable and certified for zone 1,iic,t3 area classification. all electrical and instruments shall be certified for intrinsically safe (ex-ia) and solenoid valve shall be certified to explosion proof (ex-d). all instruments and enclosures (junction boxes/ cabinets/panels/ accessories) in field shall be dust proof and weather proof with ip-67., 200 mm nb, 150 mm nb, 100 mm nb, 80 mm nb, mvw spray nozzle with 1/2" mnpt end connection, moc - stainless steel, ul / fm listed, (with inbuilt strainer): size 15 nb, mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-18, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-22, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-22, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-26, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-26, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 120 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-30, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-35, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-35, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-41, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-51, spray angle 110 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-51, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., mvw spray nozzle with 1/2" mnpt end connection, k factor-79, spray angle 90 , moc - stainless steel with corrosion resistant coating, ul listed., quartzo

Central Government/Public Sector

CTN :41211987

29 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of set of interlock washers for axle end equipment of vande bharat train set wheel (ver 2.0). 1. interlock washer suitable for m10 hex socket head cap screw qty- 352 nos., 2. interlock washer suitable for m8 hex. socket head cap screw, qty-288 nos., 3. interlock washer suitable for m16 hex. bolt, qty.- 2560 nos ., note: 1) interlock washer shall be supplied as pairs glued together to fasten as such, 2) interlock washe r should be zinc flake coating (geomet321 or equivalent) with top coat, without any hexavalent chromium, without any integrated or separately added lubricant, minimum salt spray test life of 1000 hours shall be e nsured [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41212106

30 Jul, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of set of hardware items containing fasteners and interlock washers for axle end equipment as per icf drg no 89102007 ts/tc wheel item no 3,4,5,6 & 7: 1.iso 4017 m20 x 80 10.9 grade is 1364 part 2 qty-336 nos., 2. iso 4017 m16 x 50 10.9 grade is 1364 part 2 qty-440 nos., 3.iso 4017 m20 x 65 10.9 grad e is 1364 part 2 qty-336 nos., 4.iso 4017 m16 x 45 10.9 grade is 1364 part 2 qty-440 nos., 5.interlock was her suitable for m16 hex bolt qty-2240 nos. as per icf drg no 89102007 ts/tc wheel under note 3: faste ners to be zinc electroplated to grade a3l of annexure e of is 1367 part 11, note 4 :4.1 interlock washers s hall be coated or plated with environment friendly coating 4.2 interlock washers shall be offered as pair glu ed together to fasten as such 4.3 interlock washers shall be of make/type : disc lock, durlok & gallock or si milar [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41031091

05 Aug, 2025 3.12 Lacs

Ropar - Punjab

Tender For corrigendum : purchase of football equipment - purchase of football equipment, football 4 no.pu) poly uritheen material international match standard (fifa,aiff) approved, football 5 no.pu) poly uritheen material international match standard (fifa,aiff) approved, goal post 11 x 115 inches circumference made of iron with height 2.44 meter and width 7.32 meters with white powder coating paint & wheel mounted portable., goal post 9 x 93 inches circumference made of iron with height 2.1 meter width 4.8 meter with white powder coating paint & wheel mounted portable., goal post 7 x 73 inches circumference made of iron with height 1.6 meters & width 3.6 meter with white powder coating paint & wheel mounted portable., shotting board woodenas per standard specification

CTN :41173020

31 Jul, 2025 NA

Aurangabad(Bh) - Bihar

Tender For tender for the construction and supply of open gym equipment in park vikas and kutumba janata mahavidyalaya of dev and navinagar blocks under his assembly constituency in the current financial year 2025-26.- , ghest press double , dimension(mm):1465x930x1360 , main pipe 4 inch. 114mm.(4mm. thickness) , sittingpipe45mm.(2.5mmto3mm.thickness) nylon covers for covering the nuts & bolts. with rust proof powder coating paint. , strengthens:-a)- fore arm muscle b)-waistmusclesc)-lowerbodymuscle. , shoulder exercise , dimension(mm):1465x930x1360 , main pipe 4 inch. 114mm. (4mm. thickness) sitting pipe 45mm. (2.5mm to 3mm. thickness) nyloncoversforcoveringthenuts&bolts.with rust proof powder coating paint. , strengthens:-a)-forearmmuscle , b)- , arm shoulder wheel , dimension(mm):1370x890x1610 , mainpipe4to5inch (4mmthickness) both sidefourarmsupportpipe.45mm(2.5mmto3mm thickness) both side four rotating wheels 35mm. , (2.5mmto3mm.thickness)withrustproof powder coating , paintstrengthens:-a)-upperbodymuscles.b)-lower muscles c)- improves joint flexibility , body , surf board , dimension(mm):1465x930x 1360. , mainpipe4inch(4mmthickness) sporting pipe:410d& 310d. with rust proof powder coating paint. , strengthens:-a)-forearm muscle b)-waist musclesc)-lowerbodymuscle. , , cycle , dimension(mm):1050x560x1470 , 5 , 6 , 7 , 8 , 9 , main pipe 4 inchi. 114mm. (4mm thickness) handle pipe 35mm.(2.5mmto3mm.thickness revolvingpaddles. nylon coversforcoveringthenuts&bolts.withrust proof powder , coating paint. strengthens:-a)-lowerbodymuscleb)-waist muscles -leg muscle , standing & sitting twister , dimension(mm):1740x510x 1425 , main pipe 4 inch. (4mm thickness) sporting pipe: 410083100.with rust proof powder coating paint. , strengthens:-a)-waistmuscle (b)-thigh muscle , c)-lowerabdominalmuscle , sit up boar ddouble , dimension(mm): 1570 * 1440 * 670 , mainpipe4inch(3.5mmto4mmthickness) , sporting pipe:42mmod&32mmod.with rust proof powder coating paint. , strengthens:--waistmuscles)-thigh muscle , )-abdominal muscle , eliptical cross trainer , dimension(mm):990x530x1660 , mainpipe4inch(4mmthickness)sporting pipe: 4100 & 3100. with rust proof powder coating paint. , strengthens , al-improves cardiovascular fitness. , b)-buildstrengthinbody)-tone muscles. , body shaper the horse , dimension(mm):1180x530x1070 , main pipe4inch(3.5mmto4mmthickness)sporting pipe: 4100 & 3100. with rust proof powder coating paint. , strengthens:-a)-forearm , muscles. b)-core muscle. <)- , lower body muscles. , push and pull chair , dimension(mm):1465x930x1360 , main pipe 4 inch. 114mm. (4mm, thickness) sitting pipe 45mm. (2.5mm to 3mm. thickness) , nyloncoversforcoveringthenuts&bolts. with rust proof powder coating paint. , strengthens:-a)-fore arm muscle b)- , waistmusclesc)-lowerbodymuscle , 10 , leg press , air walker , dimension(mm):1285x510x1400 mm. , mainpipe4inch.(4mmthickness]sportingpipe:4100& 3100 with , rust proof powder coating paint. , strengthens:-a)-thighmuscles.b)-glutes muscles. c) , lower leg muscles, , bech-desk37 , single pull row ingmachine , dimension(mm):550x700x1180 , mainpipe4inch 4mmthickness]sportingpipe: 4100 & , 3100, with rust , proof powder coating paint. , strengthens , a)-leg , muscle.b)-improvesjointflexibility)-lower body , muscle. , arms & pandal bike , dimension(mm):1050x560x 1470 , mainpipe4inchi.114mm.(4mm.thickness) handle pipe , 35mm. (2.5mmto 3mm.thickness) revolving paddles. nylon covers for covering thenuts & bolts. with rust proof powder , coating paint. , strengthens:-a)-lowerbodymuscleb)-waist muscles , c)- , leg muscle. , parallel bar , dimension(mm):2700x560x1400 , mainpipe:41008310d.withrustproof powder , coating paint. strengthens:-a)- improves , joint flexibility b)-waist muscles c)- , lower body muscle. , monkey bar climber , mainpipe3inch(4mmthickness)sportingpipe: 4100 , dimension(mm):2610x1160x1930 , 31.00. with rust proof powder coating paint. , strengthens:-a]

CTN :41177763

30 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supplying items for the new integrated high court complex at bandra government colony, cts no. 629/1234/a, bandra (east), mumbai. - all concrete should be admixed with integral hydrophilic crystalline admixture (16bars) reputed makes like bulwark. taskmek, grace or equivalent for reducin permeability by more than 85% when tested as per din 1048 part 5 (after applying cycles of hydrostatic pressure), for self-healing of cracks up to a width of 0.40 mm, for reduced sulphate attack and for high early strength of concrete etc. this should meet the requirements specified in the recommended dosage rate of 1% complete as per manufacturers specifications to the entire satisfaction of engineer-in-charge. hydrophilic crystalline admixture shall also have a corrosion inhibitant property and shall be compatible with any other water reducing concrete chemical admixtures added to concrete for workability purpose. crystalline formation shall be mix of cylindrical & circular in shape to have maximum filling of pores the admixture used shall have manufacturers test reports and approval mandatorily both from iits and irc (indian road congress). approved makes: pidilite/ technonicol/ myk/ mapei, providing & applying 2 components, solvent free, liquid applied elastomeric seamless hybrid polyurea polyurethane membrane, using high pressure plural component spray equipment, to form a minimum system thickness of 1.5 mm in two or more passes with a total consumption of 1.5-1.6 kg / m2. the membrane shall have 100% solids, voc free, tensile strength > 15 mpa as per astm d 412, elongation > 450% as per astm d 412, low temperature crack bridging ability of 3.2mm as per astm c 1305, shore a hardness > 85 astm d 2240, puncture resistance > 1000 n as per astm e 154, water head resistance > 7 bar as per astm d 5385.the coating should pass dynamic crack bridging as per en 1062-7, method b for 20,000 cycles at -20 degree temperature. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. apply primer coat of epoxy primer by roller/ airless spray guideline and coverage @ 5-6 m2/ltr depends on porosity of concrete. allow to cure for max 5-6 hours. broadcast anti slip grains of 200-300 micron (dried sand) on wet primer at coverage of 0.8-1 kg/m2 and allow to come to touch dry condition before application of membrane. approved makes: pidilite/ technonicol/ myk/ mapei, supplying and installing 1.5 mm composite thick fully bonded weldable hdpe membrane conforming to is 16471:2017 requirements of ug waterproofing structures, requirements to provide type a fully bonded protection of ug waterproofing structures. the membrane shall exhibit 25 years of service life tested and complied in accordance with en 13251:2016 durability certification. the membrane should be minimum 2.4 m wide comprising of an hdpe layer and a pressure sensitive adhesive layer which is covered by a weatherproof protective layer with lap joint strength at overlaps >15000 n/m astm d 6392:2012. the membrane shall have minimum of 100 mm side and end laps which shall be thermos fused with leister machines at all the joints for assuring watertightness and achieving monolithic membrane. end laps and side laps should be a minimum of 100 mm with double weld system, comprising of two parallel welds of 15 mm wide each with a 20 mm air channel gap in between the two weld lines. the size of the membrane should not be less than 2.4 mtr. x 20 mtr. to minimize the joints. this membrane shall be continued over the vertical surface but terminated minimum 100mm below the top edge of the raft slab/footings and fixed as per recommendation. the hdpe membrane should have the below mentioned technical properties- 1) lap joint(side and end lap) strength at overlaps 15000 n/m astm d 1876 2) resist hydrostatic pressure of 70 m head of water as per astm d5385 3) puncture resistance of 1000 n as per astm e1544) peel adhesion to concrete of 150

Bakery Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government