Latest baling press scrap Tenders | Government baling press scrap Tenders

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

CTN :39038241

22 Aug, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20no’s), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, battery–charger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injector–multi hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineer’s square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, an

Central Government/Public Sector

CTN :41246933

19 Aug, 2025 NA

Jalandhar - Punjab

Tender For supply of gym equipment - olympic flat bench press , olympic decline banch press , olympic incline bench press , flat bench , multi functional bench (incline/decline) , commercial utility stool (back gym chair) , cable crossover machine , functional trainer , smith machine & squat rack , chest press machine , commercial seated leg curl , commercial leg extension , commercial leg press , seated calf machine , commercial shoulder press , forearm/wrist curl machine , motorised treadmill , stabilizer 4kva(90v to 280v) , pec dec/rear delt , 4-cut weight plates , armour dumbells: 2.5/2, 5/2,, 7.5/2, 10/4, 12.5/4 15/4, 17.5/4, 20/4, 25/2, 30/2, 35/2, 40/ , dumbell rack , olympic spring lock , plate stand , olympic rod 8' deluxe with bearing , olympic rod 7' deluxe with bearin , olympic rod 4' plain deluxe with bearing , olympic rod 4'ez deluxe with bearing , draw muscle stretch machine , t-bar (incline level row)

CTN :41259730

20 Aug, 2025 NA

Meerut - Uttar Pradesh

Tender For supply of chisel twenty five mm , blow lamp torch patti , multi tech plastic stubby two in one screwdriver , gas charging meter with charging line two fifty psi , small tube cutter , pipe bender set one by four one by two five by eight metal , pin screwdriver , split ac fan blade puller , swaging tool , blow lamp torch double flame , flaring tool , high pressure washer , indoor washing bag , tube cutter , rotary hammer drill m by c , minifold gauge , mesoney drill bit set hammer type sds plus , countersink drill set six mm nineteen mm , soft face hammer thirty five mm , weighing machine up to ten kg , hydraulic bearing puffer three jaw up to five ton , two jaw bearing puller , t spanner socket set six mm to nineteen mm , multimeter prob fluke , spanner set insulated type six to thirty two , drill press ingco dp one three three five zero five , tool bag stanley

Central Government/Public Sector

CTN :41237144

21 Aug, 2025 NA

Dankuni - West Bengal

Tender For corrigendum : supply of locking pin for hydraulic bearing press machine, material en24, hrc 48-50 as per drawing att ached. [ warranty period: 30 months after the date of delivery ]

Corporations And Associations And Others

CTN :41255186

07 Aug, 2025 6.45 Lacs

Delhi - Delhi

Tender For providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone - providing and installation of children play equipments in municipal park near h.no.ru-335, ru block pitampura, ward no.57 under keshavpuram zone, supply and fixing of double arch swing.leg support :80 mm nb pipe. seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 6.0 m x 1.5 m. height : 2.6 m. top bar :50 mm nb pipe. suspension: 6 mm rubber coated chain. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat/ u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chair. the bail bearings shall be mounted inside a specially designed nylon clamp. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of spiral slide. ladder-frame- 25m m n b pipe. handrail - 20 mm n b pipe. centre support- 50 mm n b pipe. area : 2.5 m x3.5 m. platform height : 2.1 m. chute f r p the topcoat is done using the best quality brand or duly powder coated. spiral slide shall be chute made of frp (fiber reinforced plastic / lldpe (low linear density poly ethyline) having thickness of 4mm slide center support shall be 80mm nb b lass gi pipe. landing module shall be supported by 20mm nb b class gi pipe. slide extension platform shall be made from frp / lldpe. the railing shall be made from 15mm nb and 20nn nb b class gi pipe. all pipes shall be coated with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat shall be powder coated to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)c37c40c41c39 (as per direction of officer

State Government

CTN :41192409

19 Aug, 2025 80.00 Lacs

Rewa - Madhya Pradesh

Tender For cleaning and electrical item supply in central jail rewa m.p. - brush for wall painting (all sizes) , brush for painting of all sizes , paint all colours , toothpaste , after shaving liquid (dettol) , saving blade (10 pieces) , alum , asthura , saving brush , scissors (new) , scissors repair , saving cream (100 gms) , distemper (all colours) , emulsion (all colours) , bathroom cleaner , scented phenyl , toothbrush and tongue cleaner , turpentine oil , date broom/chhind broom , twinew , red/yellow/white soil , bleaching powder , plastic comb/kangha , plastic bucket (15 litres capacity) , plastic mugha (01 litres capacity) , urine pot (male) , urine pot (female) , washing washing (wall) , water bottle tank (500 litres) , pvc elbow, tee, joint (all sizes) , pvc pipe 2’’/ 4’’/ 6’’ , commode seat , flash (in set) , indian toilet sheet , electrical accessories , led bulb 18 watt , led tube light 40 watt , led tube light 20 watt , led high mast light 50 watt , led high mast light 100 watt , board switch , bed switch , board holder , bulb holder , insulator 60 ampere , tester , plas , mcb 32 ampere , copper multi plus wire (1.5mm) , copper multi plus wire (2.5mm) , aluminium wire (1.5mm) , taprol , physical copper wire , winding copper wire (no. 32,34,36, each gauge) , bearing 6000 to 6003 , bearing 6201 to 6204 , bearing 6401 to 6403 , condenser 3.5 m.f.d. , condenser 2.5 m.f.d. , condenser 4 m.f.d. , power combine , power socket , power switch , press coil 2000 watt , press coil 1550 watt , iron connector , five pin socket , three pin socket , top big , varnish , slip no. 1,2, 3,4, 5,6,7 , grease , casing strip (10 ft) , press pin , board(8x10) , board(4x6) , watch cell , remote cell , torch (big charging) , charging bulb , gitlock , screw , cut pin , cooler fan no. 12 , cooler fan no. 18 , wall fan rounding motor , ceiling (small) , ceiling (big) , ceiling led light

CTN :41230703

04 Aug, 2025 3.00 Lacs

Ernakulam - Kerala

Tender For purchase of opem gym equipments in ward 24 - appx a, chest press cum shoulder press : providing and fixing chest press cum shoulder press fnf 016 (make fun play ) using, minimum 100 nb gi c-class pipe for center frame , minimum 40 nb & 32 nb gi b-class pipe for main frame , minimum 32 nb & 25 nb gi b -class pipe for handle frame , minimum 32 nb &25nb &40nb gi b class pipe for connecting pipe , lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for seat & back rest , nylon 66 injection moulded bearing cap & pipe cap , fully done by first coat of primer -jotun brad 40-50 micron thickness and top coat of pure polvester powder with 70-80 micron thikness powder coat including cost of concrete foundation , all materials, labour, etc all complete asper the instruction of engineer in charge, leg extention : providing and fixing leg extention fnf 020 (make fun play ) using , minimum 100 nb gi c-class pipe -for main frame ,minimum 40 nb gi pipe for foot rest pipe ,minimum 40 nb & 25 nb gi pipe for handle. minimum 25 nb & 40 nb gi b-class pipe for connecting pipe ,lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest, nylon 66 injection moulded beraing cap & pipe cap , fully done by first coat of primer jotun brad 40-50 micron thickness and top coat pure polyester powder with 70-80 micron thickness powder coat including coast of concrete foundation all materials , labour, etc all complete asper the instruction of engineer in charge, tai chi cum standing twister : providing and fixing tai chi cum twister fnf 021 (make fun play ) using , minimum 100 nb gi c-class pipe -for main frame ,minimum 25 nb gi b-class pipe for handle frame , lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for twister disc, minimum 25 nb & 20 nb gi b-class pipe for seating frame , minimum 80 nb gi b-class pipe for seating frame stand, minimum 80 nb gi class pipe for twister stand , minimum 25 nb gi b-class pipe for twister handle frame, lldp plastic-twister disc. nylon 66 injection moulded bearing cap &pipe cap, fully done by first coat of primer- joitun brad 40-50micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder coat including cost of concrete foundation ,all materials,labour,etc all complete as per the instruction of engineer in- charge., cycle : providing and fixing cycle - fpspcl208 (make fun play ) using , 25nb & 40nb gi b-class pipe for main frame , 32 nb gi b-class pipe for seat frame , 25nb gi b-class pipe for handle frame , nylon 66 injection moulded bearing cap & pipe cap , fully done by first coat of primer - jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder coat including cost of concrete foundation , all materials, labour, etc all complete asper the instruction of engineer in charge

Central Government/Public Sector

CTN :41012265

29 Jul, 2025 NA

Bangalore - Karnataka

Tender For bid to ras tender for supply of harmonisation board : : - harmonisation board , packing box for harmonisatiom board , harmonisation tool kit , contour board and pole assy , bearing off loading device , mooring fixture , clamp assembly , bush press tool , cyclic stopper , lifting sling helicopter

CTN :41185646

02 Aug, 2025 9.96 Lacs

Ananthnag - Jammu And Kashmir

Tender For supply of lf9080, engine oil filter , fs36230, 550sf9012200, fuel water separetor , fs36260,4327370, primary fuel filter , ff5687,4960198, secondary fuel filter , aa2960, primary air filter , af26434, secondary air filter , pbe0160f010n, hyd oil filter , fax-400x20, hyd oil return filter , 9830643, drive pump filter element , 550s1003665, rubber flap , 4324102412, 9325000610, air dryer filter , 550s-1001078, cutter , kb4004, fuel tank filter , c5580037, belt v ribbed , k00002, sher pin , 1362265ga04, wiper blade , m14x45p1.5, bolt , m14p1.5, bolt , 57x152, uj cross , 35x106, uj cross , 57x144, uj cross , 550sk055788, brake disc , 3533400016, frame oil seal 85x105x10 , 3533400026, frame oil seal 100x125x12 , 550s1003666, press plate , 3530109120, self aligning bearing 22214e , 550s1001742, pf side shim , 550s1001497, bearing shim , 89x240, drive line drive shaft , 896h-1ch-c, solenoid valve 24 v , ce4t10r11, emergency switch ) /bid number : gem/2025/b/6465237 * /dated: 23-07-2025 & & / bid document 1 / 25

Baling Press Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others

State Government

Central Government/Public Sector