Latest bandolier scrap Tenders | Government bandolier scrap Tenders

State Government

CTN :40539837

13 Jun, 2025 40.91 Lacs

Gooty - Andhra Pradesh

Tender For providing metal spreading to balance bays, providing grills and new upvc windows, providing water supply arrangements to earth pits, new septic tank and soak pit etc., at 220kv switching station gooty in anantapuramu district

State Government

CTN :40520941

05 Jun, 2025 1.05 Crore

Krishna - Andhra Pradesh

Tender For rectification of existing earth mat, laying of new cpvc water pipe lines for watering of earth pits and metal spreading at 220/132/33 kv sub-station, gudivada in krishna district

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

State Government

CTN :40545154

10 Jun, 2025 NA

Sundernagar - Himachal Pradesh

Tender For supply of digital multimeter (q3) , digital earth resistance meter (q3) , true rms clamp meter (q3) , insulation tester (q3)

State Government

CTN :40533118

04 Jun, 2025 7.57 Lacs

Delhi - Delhi

Tender For supply and filling of ec bags with good earth during monsoon season for sub-division-i and iii.

State Government

CTN :40533120

04 Jun, 2025 7.81 Lacs

Delhi - Delhi

Tender For supplying of safeda ballies, e.c. bags, good earth, filling of e.c. bags and carriage of same from bawana escape drain store to on various locations where it warrants for flood preparedness and flood fighting in bawana ac.

State Government

CTN :40533133

04 Jun, 2025 18.29 Lacs

Delhi - Delhi

Tender For supplying of safeda ballies, e.c. bags, good earth, filling of e.c. bags and carriage of same from kirari to on various locations where it warrants for flood preparedness and flood fighting at kirari ac. for financial year 2025-26.

Central Government/Public Sector

CTN :40543570

21 Jun, 2025 12.50 Lacs

Tiruchirappalli - Tamil Nadu

Tender For tender for the supply of electrical maintenance materials at iim tiruchirappalli - 5a switch (make: legrand) model no: 673000 (myrius), 5a 5pin socket (make: legrand) model no: 673044 (myrius), 15a switch (make: legrand) model no: 673010 (myrius), 15a 3-pin socket (make: legrand) (type: 2 module) model no: 673045 (myrius), 2.5 mfd ceiling fan condenser., 4 feet tube light fitting (m. no: v2 vector 28w tch207)make: philips, 28w lamp 4 feet, product name: mcb (miniature circuit breaker)type: single pole (1p)rated current (in): 16 amperesbreaking capacity 6 ka / 10 karated voltage 230v ac, 50 hznumber of poles 1 (phase only)mounting type din rail mounting (35 mm), name rccb (residual current circuit breaker)type 2-polerated current (in) 40 amperesrated sensitivity (i n) 300 ma (milliamperes)voltage rating 230/240v ac, 50 hznumber of poles 2 (l + n)tripping type electromechanicaltripping time 200 ms at rated residual currentmounting din rail (35 mm)short-circuit withstand: typically, 6 ka with backup mcbtest button yes (for manual function check)standards compliance: is 12640-1 / iec 61008-1application protection against earth faults, electric shocks, glass fuse-6a, glass fuse-4a, 5a - 3 pin plug top, 16a - 3 pin plug top, name: 2 module fan regulatormake: legrandmodel series myrius mounting type: modular (2 module size)regulation type: rotary typecontrol steps: 5 stepscolor :white, name: night lampmodel number 30974brand philipstype: led step lightvoltage 230v accolor temperature: 3000k (warm white)luminous flux: 30 lumensmake: philips, name: led light fittingip rating: ip66 (outdoor)light colour: whitetype of luminaire: ledrated power: 45 whousing material: aluminium pdccertification: bislumen: 5400 lumenshape: rectangularled life span: 50000 hroptical cover: toughened glasspipe diameter (mm):50 mm, name: 2-pole mcb (miniature circuit breaker)current rating: 40 amperespoles: 2 (double pole)breaking capacity 10 ka (typically)voltage rating: 240/415v acmounting type: din rail mountingstandards compliance: is/iec 60898-1, name: choke led driver (m.no: t124000-36e10s)make: fulham, ignitor (m.no:spd1277s5a5k67) make: fulham, exhaust fan capacitor [1.5mft & 1 mft], name: block screwsizes: 2 inch, 1.5 inch, 1 inchquantity: 100 pieces each sizethread type: fully threaded, name: heater coil with anodecapacity 3 kw (3000 watts)voltage rating 240v acthread type b.t.h. (british thread heater)thread size 1 (1.25 inch)heating element type tubular sheathed (copper tube)anode material: magnesium (to protect tank from corrosion)application suitable for storage water heater.protection overheat protection (thermostat optional)certifications: isi certified, distilled water, application: battery, 200 mm sweep exhaust fan brisk air, make: crompton, single-phase motor 1/2 hp (mono block), make: kirloskar, fan regulator nob, make: legrand, name: led tube light fitting (4 feet / 1200 mm)length: 4 feet (1200 mm)power consumption: 20winput voltage: 230v acluminous flux: 1800 2200 lumenscolor temperature: 6500k (cool daylight)mounting type: surface mounthousing material: polycarbonate diffusercri (color rendering index) > 80life span 25,000 50,000 hoursip rating ip20 (for indoor use), 8 modular box with plate, type: surface typemake: legrand, 4 modular box with plat, type: surface type make: legrand, cable tie ( 300 mm & 150 mm) -100 piece, 1.5 sqmm multi core cable (cpwd approved brand), 4 sqmm multi core cable (cpwd approved brand), name:32a single pole mcb, (cpwd approved brand), name: olr, rating 4-6.5a, make: l&t type: mk1, name: starter, rating 4-6.5a, (cpwd approved brand), name: starter, rating: 6-10a, model: mug06(cpwd approved brand), name: olr, rating: 6-10a, model: mug06, make: l&t, name: starter, rating:15- 25a, model: mug010(cpwd approved brand), name: olr, rating:15- 25a, model: mug010(cpwd approved brand), name: 10 w led bulk head fitting(cpwd approved brand), name: 7 watts led night lamp, colour: white(cpwd approved brand),

Central Government/Public Sector

CTN :40543533

19 Jun, 2025 NA

Roorkee - Uttarakhand

Tender For new development the old damage lawn in earth sciences department at roorkee campus.

State Government

CTN :40126907

16 Jun, 2025 69.66 Lacs

Bulbulchandi - West Bengal

Tender For corrigendum : additional laying of pipe line for improvement of fhtc functionality by upvc pipe line and augmentation of ph-1,ph-2,ph-3,earth filling and boundary wall of ph-1,ph-2,ph-3 for bulbulchandi piped water supply scheme at habibpur dev. block in the distr

Bandolier Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors