Latest beams Tenders | Government beams Tenders

Private Sector

CTN :43299824

07 Jan, 2026 NA

Delhi - Delhi

Tender For work of 1. providing & constructing new storm water drainage system (central park drain). 2. restrengthening & retrofitting works (strengthening of rcc columns, repair of cracks in rcc columns & beams). 3. modification of rain water harvesting system as per latest norms of djb.

corporations/Associations/Others

CTN :43290518

12 Jan, 2026 33.04 Lacs

Kanpur - Uttar Pradesh

Tender For tender for supply of renovation of old substation for utilization as maintenance office : : - providing and applying fibre reinforced elastomeric liquid water proofing , demolishing brick work , making the opening in brick masonry of wall , dismantling doors of area 3 sq meters and below window , dismantling doors of area 3 sq meters and above window , reinforced cement concrete work in chajjas etc , steel reinforcement for rcc work , centering and shuttering including strutting propping etc , shifting filling compaction of available malwa , supplying and filling in plinth with sand under floors , providing and laying in position cement concrete , providing and laying vitrified tiles in wall floor , providing and laying of 25 mm thick kota stone slab flooring , providing and fixing tiled false ceiling of specified materials , dismantling old plaster or skirting raking out joints , 12/15 mm cement plaster , removing dry or oil bound distemper , providing and applying white cement based putty , distempering with 1st quality acrylic distemper , finishing walls with acrylic smooth exterior paint , providing and fixing aluminium work as per item a and b , providing and fixing float glass panes of 5 mm thickness , providing and fixing 12 mm thick prelaminated particle board , providing and fixing aluminium american handle , providing and fixing aluminium universal hydraulic door closer , providing and fixing bright lock with 6 levers , providing and fixing aluminium tower bolts 250x10 mm , providing and fixing aluminium tower bolts 150x10 mm , providing and fixing double action hydraulic floor spring , providing and fixing sliding device for aluminium door , making plinth protection 50mm thick of cement concrete , brick work with common burnt clay modular bricks below plinth , brick work with available bricks with cleaning of old mortar on site in plinth and foundation , brick work with common burnt clay bricks above plinth , providing and laying in position cement concrete m20 , providing and fixing gi chicken wire mesh , providing and laying 60 mm thick faciory made cement concrete , wiring for light point fan point exhaust fan point call bell point , supplying and drawing following sizes of frls pvc insulated copper conductor 3x2 5 sqmm , supplying and drawing following sizes of frls pvc insulated copper conductor 3x4 sqmm , supplying and fixing gi box with fixing 6 pin 5 6 15 16 a modular socket outlet and 15 16 a , wiring for group controlled looped light point fan point exhaust fan point call bell point , supplying & fixing gi box with 25a modular socket outlet and 25a modular sp mcb c , supplying and fixing following way three pole and neutral mcb distribution board , supplying and fixing 5 a to 32 rating 240 41 5 v 10ka c curve , supplying and fixing following rating four pole 415 v isolator in the existing mcb db , earthing with g l earth plate 600 mm x 600 mm x 6 mm , supplying and laying 25 mm x 5 mm g i strip , supplying of following sizes of 1point 1 kv grade multicore aluminium conductor , supply and installation of recess led lights in false ceiling 36 watts , supply and installation of 22 watt led batten , supply and fixing of 400 450 mm sweep wall bracket fan , supply installation and commissioning of 1200 mm sweep ceiling fan

Central Government/Public Sector

CTN :43305542

13 Jan, 2026 10.83 Lacs

Ganjam - Odisha

Tender For providing of facility management services - lumpsum based - industrial; repair and rehabilitation of rcc columns and beams in mrss switchyard; consumables to be provided by service provider (inclusive in contract cost)

CTN :43253379

26 Dec, 2025 6.93 Lacs

Bhiwani - Haryana

Tender For rough cost estimate for providing and installation of cement concrete electric pole in mc siwani

Central Government And Public Sector

CTN :43030652

05 Jan, 2026 5.00 Lacs

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of scrapping of damaged columns beams and walls , applying of zinc oxide to the damaged columns beams and walls , repair and plastering of columns beams and walls , applying of smooth putty and primer , painting of emulsion paint as per the approved colours

Central Government/Public Sector

CTN :43035511

26 Dec, 2025 NA

Noida - Uttar Pradesh

Tender For corrigendum : fabrication supply of factory finished fabricated structure of power house, and common control room ,columns, bracings, wall beams, floor beams, with supply of raw material based etc at unit1 at 1x800 mw dcrtpp yamuna nagar. haryana

State Government

CTN :43288846

06 Jan, 2026 NA

Raipur - Chhattisgarh

Tender For supply of pre-stressed reinforced cement concrete pole

corporations/Associations/Others

CTN :43279040

03 Jan, 2026 2.32 Lacs

Kolkata - West Bengal

Tender For restoration of dilapidated wall, window supporting structures with its allied cracked columns, beams etc at the adjoining side of h.t pump unit no- 1 to 3 at the pump house of rsm sq. bps

CTN :42953993

24 Dec, 2025 79.44 Lacs

Lucknow - Uttar Pradesh

Tender For corrigendum : for casting of pre stressed cement concrete pole at departmental pole unit sarojini nagar lucknow - for casting of pre-stressed cement concrete pole at departmental pole unit, sarojini nagar, lucknow

CTN :43225953

07 Jan, 2026 5.00 Lacs

Panaji - Goa

Tender For supply installation and commissioning of lab. equipment for civil engg dept - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity including accessories and toolkitspecification:-1. machine capacity required : - digital compression testing machine with capacity of 3000kn (300 tons) with flexural attachment of 100kn capacity. digital compression testing machine shall confirm is 516 and is 14858. digital compression testing machine for testing concrete cubes of size 100mm, 150mm, 200mm ,300mm and concrete cylinder specimen up to 300mm diameter and 300mm height . also the cement mortar cubes of 70.7 mm size and 50mm size. 2. loading frame:- steel welded loading frame with top cross head base and solid side walls. hydraulic piston is fixed to the base and platens are hardened, ground and polished. the upper and lower plate should be marked with the guidelines on the lower plate to keep the specimen co-axially with hydraulic jack. the machine should be provided with suitable side spacers as standard to accommodate the variety of sizes of specimens as indicated above. the two speed pump to allow fast approach of platens for daylight closure and also to allow precise control over load application using control lever and valves.3. digital display:- display shall show force and stress values in si units. the electronic control unit shall be based on suitable processor with a built in interface for laptop and computers. the processor speed shall be such that the online load deformation curve on full screen is smooth.4. the storage capacity to record and store 2000 complete test results with the facility of printing results/logged data through built in parallel port. least count of 0.1 kn.5. automatic controls for switch off on overload or over travel or specimen break or manual termination.6. power supply :- suitable for operation on 220v/230v single phase 50hz ac supply 7. additional requirements maximum clearance between plate 400mm. maximum distance between side platen 400 mm platen size 320mm square.8. flexure attachment:- flexure testing machine of 10 tons ( 100kn) capacity confirming to is 516. loading to be applied by the downward movement of piston. machine shall be suitable to test beams of 100x100x500 mm and 150x150x700mm.machine shall be supplied with suitable standard spacers for testing different sizes of beams.9. additional requirement for flexural test: three point loading light weight rugged high strength frame.least count 0.1 kndistance between supporting rollers: - 600mm for 150x150 x700 mm beam and 400mm for 100x100x500 mm beamdistance between loading rollers 200mm for 150x150x700mm beam 133 mm for 100 x 100 x500 mm beam power supply suitable for operation 220v 50hz single phase.10. the machine should be supplied with accurate toolkit11. compatible software should be included

Beams Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Private Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others