Latest bearing bar Tenders | Government bearing bar Tenders

Central Government/Public Sector

CTN :40575344

09 Jun, 2025 NA

Itarsi - Madhya Pradesh

Tender For supply of mild steel double sheave crane bottom block hook with swivel round eye head hook & bracket arrangements mounted on thrust bearing with mild steel forged sheave gr ay iron casting. axle pin of steel bar, sheave dia 210mm, groove distance 10mm dia, complete set capacity 03 ton with test certificate, as per is 3815:1969 [ warranty period: 30 m onths after the date of delivery ]

Central Government/Public Sector

CTN :40556054

21 Jun, 2025 NA

Dibrugarh - Assam

Tender For tender for supply of structural steel for bcpl lepetkata - angle metallic type equal standard is 2062 material carbo steel size 50 mm 50 mm thk 6 mm , angle metallic type eq angle standard is eq material ms angle 75mm 75mm 6 mm 6 mtr length as per is 2062 , ms angle 150mm 150mm 12 mm 6 mtr length as per is 2062 , channel metallic standard is 2062 gr a material carbon steel size 150mm 75mm , ms flat size 50mm 5mm as per is or eqv standard , channel metallic type channel standard is or eq material ms material standard na size 100mm 50mm 5mm , ms chequered plate 5 mtr 1point 25 mtr 5 mm as per is 2062 hot rolled mild steel , bar metallic type round material mild steel size 20 m , bar metallic type round material mild steel size 25 m , bar metallic type round material mild steel size 32mm , ms angle size 25mm 25 mm 5mm as per is 2062 equ standard

State Government

CTN :40560629

23 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of laboratory equipments /laptop/printer - flash chromatography system model a1700x-200ml yamazen carporation, japan make, programmable elution modes: isocratic step, linear & rf gradient, pumping flow rate: 5-200 ml/min, maximum pressure: 1.5 mpa (15 bar/217 psi), no. of solvents: use up to 4 solvents in a gradient, uv detection: dual variable wavelength pda uv vis, detector 200-800 nm,uv detector sensitivity: 0.02-10.24 saufs, fractionation modes: time manual, peak, peak& slope (valley)02, automated densitometer with 4 reading channelsmake- genaxy/thistle/cleaverdensitometer a universal densitometer scanner with software capable of reading 144test per min. is available for band quantitation following post electrophoresis staining ordering information-cell as gel application packages equipped with bridges applicator and clinical test kit, 1x4 -specimen semi micro applicator volume applied sample band with compatible strip size: 5.7x14cm, cell as gel wet membrane bridges and densitometer, 1x8.5 cm bridge for 1x5.7x7x14cm or 2x2.5x14cm cell as gel. strip cat no. cslbg8.55 terbo scan software densitometer (excludes computer and scanner) cat no. csldens flat belt scanner for turbo scan software cat no. csscan, uv transilluminatormake- genaxy/thistle/cleaverresearch model: 312nm single wavelength transilluminator for detection of more than 0.1 ng of dna filter area (cm) uv 20 x 20cm , analytical balance make- aczet/radwag/sartoriuscapacity :220gm readability : 0.1mg repairability: 0.2mg response time: 2-3 sec pan size : 90mm display: lcd backlite calibration : motorized internal calibration, probe sonicator (touch screen) with sound proof enclosure make-labman/aczet/sonic temperature indicator and controller touchscreen display - 4.3 inches tft user password protection available microprocessor controlled and completely programmable. large lcd display with time setting. auto-tuning for convenience and optimal processing efficiency. variable power output control. auto frequency tracking output amplitude 0-100% adjustment. automatic fault alarm. frequency 20-25khz-automatic tracking process capacity 0.5-500ml (approx.) probe dia (titanium alloy) standard 6mm (1/4") display 4.3 inches tft display function temperature, power, time, etc. temperature range( c) 0-99 c timer (selectable) yes overload protection yes user password protection available input method touch screen control, data memory 20 groups output power 6.5-650w (adjustable) power supply : ac 220v/50hz, pulveriser/grinder make-ideal/mac/amccommercial dry grinder are used for grinding different types of products like spices, fresh ginger, salt, sugar, leaves, herbal products, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production. 3 hp motor deluxe model camber size: 10 x 5 cm. capacity: 20-25kg./hr., decoction apparatus gas operated decoction making machinemake-ideal/mac/amcvessel capacity: 15 liters for 1 to 5 lit production capacity, motor: /1 hp single phase motor fuel: lpg (fitted with i no. burners) all contact parts in 304 grade stainless steel complete structure in mild steel ready to use with all standard accessories wi s.s. bucket 10 ltr., s.s. mesh, & s.s. round tank, cooling centrifuge make-remi/eppendrof/thermo programable compensation for true sample temperature: yes pre cooling: yes acceleration profiles: 9 deceleration profiles: 9 & coasting fast spin: yes display: lcd control communication: digital parameters setting switches: bi-directional encoder brushless motor with frequency drive: yes inverter fault detection with auto shut down: yes cfc free refrigeration system: yes no. of programs: 99 last set parameters recall: yes choice of rpm/ref setting: rpm/rcf digital countdown timer 0-99 min & continuous run: yes automatic rotor identification: yes emergency lid lock release: yes password protection: yes gas hinge to prevent door falling: yes imbalance detection with centrifugatio

Central Government/Public Sector

CTN :40555854

10 Jun, 2025 NA

Haridwar - Uttarakhand

Tender For tender for supply of aluminium alloy - aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 150 dim.- d grade- al 5083 h112 , aluminium alloy tube (material as per din-1725 and 1746 also acceptable) n.std-astm b 221(m) size- 40x5 dim.- odxt grade- al 5083 h112 , aluminium alloy round(material as per din 1725 and 1747 also acceptable) n.std-astm b 221 (m) size- d-120 mm dim.- d grade- al 5083 h112 , aluminium alloy round (round as per din-1725 & din- 1747 also acceptable ) n.std-astm b 221 (m) size- d-400mm dim.- d grade- al- 5083 h112 , aluminium alloy square bar (material as per din-1725 and 1745 also acceptable) n.std-astm b 221(m) size- 160 x 160 grade- al 5083 temper f

CTN :40194992

04 Jun, 2025 NA

Nashik - Maharashtra

Tender For bid to ras supply of steel bar round 100mm (30khgsa-100-sbr)

CTN :40521629

19 Jun, 2025 NA

Nashik - Maharashtra

Tender For supply of a/bar circular 25mm (d-16-25abr) , steel bar round 80mm (30khgsa-80-sbr) , sbr 35mm (30khgsa)

Central Government/Public Sector

CTN :40344639

07 Jun, 2025 NA

Singrauli - Madhya Pradesh

Tender For corrigendum : tender for supply of turning oblique facing tool , turning oblique facing tool , turning oblique facing tool , carb tip , 12x12mm , turning oblique facing tool , turning oblique facing tool , stragt turning tool , boring oblique facing tool , boring oblique facing tool , boring oblique facing bar , 16x16x210mm , threading tool , external , 16x16x110mm , threading tool , external , 25x25x140mm , threading tool , internal , 16x16x140mm , threading tool , internal , 25x25x180mm , threading tool , internal , 32x32x100mm , turning oblique groovng tool , v-profile , turning oblique groovng tool , v-profile , end mill cutter , parallel shank , hss , 3mm , end mill cutter , parallel shank , hss , 4mm , end mill cutter , parallel shank , hss , 5mm , end mill cutter , parallel shank , hss , 6mm , end mill cutter , parallel shank , hss , 8mm , end mill cutter , parallel shank , hss , 10mm , end mill cutter , parallel shank , hss , 12mm , end mill cutter , parallel shank , hss , 13mm , end mill cutter , parallel shank , hss , 15mm , end mill cutter , parallel shank , hss , 16mm , end mill cutter , parallel shank , hss , 18mm , end mill cutter , parallel shank , hss , 20mm , end mill cutter , parallel shank , hss , 24mm , end mill cutter , parallel shank , hss , 25mm , parting off tool , iso 7r 2012 p 40 , parting off tool , ct , iso7r2516p30 , int th tool , r-166 11 p30 , 12x12 , is13743 , cranked finish tool , crank turning tool , crank turning tool , turning oblique facing tool , tungsten carbide , boring oblique facing tool , tungsten carbide , boring oblique facing tool , 25x25x300mm , str turning tool , ct , iso1 l 2020 p30 , boring&facing bar , iso9r0808p30 , int th tool , r 166 12 p30 , tip tool , tung carbide brazed , turning oblique facing tool , turning oblique facing tool , tip tool , tungsten carbide , turning oblique facing tool , 3r 4025 , turning oblique facing tool , crank finish tool , tc , 32x20x170mm , parting tool , tungsten carbide , parting tool , 16x10x110mm , carbide tip tool , iso 9r1616p30 , boring oblique facing tool , tungsten carbide , boring oblique facing tool , 12x12x180mm , turning tool , cranked round nose , threading tool , external , 12x12x90mm , threading tool , internal , 10x10mm , turning oblique groovng tool , v-profile , turning oblique groovng tool , v-profile , int recessing tool , cranked , int recessing tool , cranked

State Government

CTN :40548129

25 Jun, 2025 18.86 Lacs

Satna - Madhya Pradesh

Tender For bhawan material - brick pakki, sand khajuraho, sand sone, cement, latrine murga, sgsv pipe(china clay pipe 2.50x8), plastic pipe 4'' (10 ft), plastic pipe 6'' (20 ft), plastic band, plastic socket, latrine seat, ballast mix, iron rod 12 mm., iron rod 10 mm., iron rod 16mm, iron nail all size, g.i. wire, floor tiles 1x1, wall tiles 1x1, paver block, white cement, profile sheet 4x10, profile sheet 4x16, iron angle, iron strip, building rod 10 no, building rod 08 no, tiles cutter blade, cement sheet 4x8, wall putty, sand paper, round bar 16mm, cutting blade 04 inch, cutting blade 14 inch, grinding plate 04 inch, grinding plate 07 inch, burma i.t. company 1,2,3,4,5 yarn, barbed wire, j hooks, steel mosquito net 04 feet wide, chain link net 05 feet wide, iron seat 16 mm, plastic hylam seat 03 feet wide, hinges 04 inch, tap nozzle (steel), m seal, raw rubber roll, u.p.v.c. pipe 1'' and 2'', u.p.v.c. socket 1'' and 2'', brass ball 2'', u.p.v.c. ball 1'', p.v.c. pipe 1'', p.v.c. socket 2'', elbow 1'', socket 1''

CTN :40540973

20 Jun, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of brass filler rod 1mm , bronze flux , copper filler rod 2mm , copper pipe half inch dia , ms copper coated filler rod , alluminium flux , refilling of oxygen gas cyl 7cb , refilling of acetylene gas cyl 3cb , calcium carbide , cutting wheel 14 inch , cutting wheel 4 inch , grinding wheel 4 inch , welding electrod e6013 , armr welding electrod 308l , angle iron 1x1 inch 3mm , round bar 12mm ms , round pipe 3inch 2mm ms , flat patti 1inch 3mm ms , ms square pipe 2mm, 1 point 5 inch , ms plate, 4x8ft, 6mm , ms sheet 22 gauge 4x8 ft , ms sheet 24 gauge 4x8 ft , tig welding torch zozzle kit , tungsten electrode lanthnide , tungsten electrode red thoriated , alluminium tig welding filler rod 4043 , coal , alluminium , molding sand , zinc sheet 1mm , drill bits, 2mm to13mm, hss , solder soft , pop rivets 1 point 5 inch ms , snap rivets point 5 inch ms

CTN :40541426

20 Jun, 2025 NA

Ganganagar - Rajasthan

Tender For supply of solder soft grade b , adhesive syn resin araldite ay 103 , plywood for gen purpose 7ply , paper wrapping kraft 1189mmx100mm , copper rod round 63mm , steel bar carbon hot rolled square 80mm , steel plate tinned 710mm x 510mmx 056mm , glue ordinary

Bearing Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government