Latest bearing shaft Tenders | Government bearing shaft Tenders

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

Central Government And Public Sector

CTN :41281277

14 Aug, 2025 NA

Thane - Maharashtra

Tender For supply of spares for asw system self cleaning strainers e e - shaft sleeve with o ring , rear end bearing , front end bearing , worm planetary gear box , u-seal , shaft seal , control drain o ring , screen basket assembly , basket bearing , shaft , drive shaft o-ring , turn buckle assembly for outlet pipe , extraction arm , spool piece , control drain pipeline , spool piece connected between gear sealing assembly , debris outlet support tee plate , frm motor mounting frame with scs body , elbow connected with tie rods , gear sealing support tee plate , seal kit , soft plastic , dowel pin for sleeve-pin 12 x 40 lg , dowel pin for sleeve-pin 10 x 40 lg , screen basket bearing screw , sleeve with drum head bolt , intermediate flange stud , elbow to ddmv flange stud , front bearing screw , collection arm with spool pipe bolt , outlet disc to spool piece screw , debris discharge bearing nut , debris discharge bearing stud , m12 nut part no-21850 , gear sealing dummy bolt , rear bearing screw , sleeve center bolt , m12 nut part no-21329 , m10 nut part no-21342 , drive shaft flange nut , drive shaft flange stud , collection arm with spool piece nut , worm gear box to intermediate flange bolt , front bearing bolt , outlet disc mounting screw , control drain flange bolt , nut m20 , gear sealing drum mounting stud , gear sealing drum mounting nut , bolt-m8 x 15 , hex. socket grub screw , hex. socket cs screw , turn buckle upper and lower nut , bolt-m16 x 40 , nut-m16 , hex. soc. head cap screw- m6 , bolt-m20 x 45lg , turn buckle upper and lower stud

CTN :41025127

23 Aug, 2025 NA

Ernakulam - Kerala

Tender For corrigendum : tender for supply of procurement of pump spares d d - nut impeller , bearing sleeve , bearing sleeve suct , bush bearing suctio , gaskets oring , ring wear , ring wear casing , ring wear impeller , stage sleeve , shaft pump , gskt oring set , locknut , key pom , shaft , bearing guide complete , sleeve bearing , bush bearing , oring , oring , sleeve bearing , coupling conical , gskt oring set , sleeve centering , casing volute , gskt casing , bush throttle , impeller , gasket , gasket flat , key , coupling conical , coupling conical , sleeve bearing , coupling conical com , ring wear imp s , nut impeller , bush throttle , circlip shaft , guard bearing , guard bearing , shaft with keys

Central Government/Public Sector

CTN :41258935

20 Aug, 2025 3.24 Lacs

Bishrampur - Chhattisgarh

Tender For supply of spares for kirloskar brothers limited make pumps 0- impeller , pumpshaftccw , bearinghousingde , bearinghousingnde , shaftsleeve , locknutforbearing , setofkeys , setoforings , gland , wearring

State Government

CTN :41225014

16 Aug, 2025 NA

Noida - Uttar Pradesh

Tender For providing of customized amc/cmc for pre-owned products - sea saw g.i, ladder step g.i, rubber chain coated, rubber seat, swinging clamp, toddler bucket seat, g.i chain, see handle, verticle g.i support for ladder & slide, platform g.i, g.1 railing pipe, clamps for structure, small, medium, large, marry go round bearing shaft complete assembly, repairing of frp jhulaas patch work repairing, welding jobs (per day-06 hours) for any type of welding work including t&p and labour

corporations/Associations/Others

CTN :41220702

18 Aug, 2025 NA

Puruliya - West Bengal

Tender For supply of procurement of spares for anupam make eot crane for rtps dvc c c - cross travel eht brake spring 1277_01_000_29_br_spr for 115_30t double girder eot crane , long travel eht brake spring 1277_02 100_02_br_spr for 115_30t double girder eot crane , main hoist eht brake drum 1277_01_000_06 for 115_30t double girder eot crane , aux hoist eht brake drum 1277_01_000_19 for 115_30t double girder eot crane , cross travel eht brake drum 1277_01_000_28 for 115_30t double girder eot crane , long travel eht brake drum 1277_02_100_03 for 115_30t double girder eot crane , main hoist input coupling 1277_01_000_07 for 115_30t double girder eot crane , aux hoist input coupling 1277_01_000_21 for 115_30t double girder eot crane , cross travel input coupling 1277_01_121 for 115_30t double girder eot crane , cross travel coupling_gear box o_p side 1277_01_000_34 for 115_30t double girder eot crane , cross travel coupling_floating shaft side 1277_01_000_33 for 115_30t double girder eot crane , cross travel coupling_wheel side 1277_01_000_32 for 115_30t double girder eot crane , long travel input coupling 1277_02_100_06 for 115_30t double girder eot crane , long travel coupling_gear box o_p side 1277_02_100_08 for 115_30t double girder eot crane , long travel coupling_wheel side 1277_02_100_07 for 115_30t double girder eot crane , cross travel floating shaft 1277_01_121 for 115_30t double girder eot crane , long travel floating shaft 1277_02_121 for 115_30t double girder eot crane , main hoist gearbox input pinion only 990_01_555 for 115_30t double girder eot crane , aux hoist gearbox input pinion only h3ah775ip_15 3.5_a for 115_30t double girder eot crane , cross travel gearbox input pinion only 310254 for 115_30t double girder eot crane , long travel gearbox input pinion only t3ah450ip_20_02 a for 115_30t double girder eot crane , oil seals for main hoist gearbox 115_30t double girder eot cranes , oil seals for aux hoist gearbox 115_30t double girder eot cranes , oil seals for cross travel gearbox 115_30t double girder eot cranes , oil seals for long travel gearbox 115_30t double girder eot cranes , bearing for main hoist hook 1277_01_230_13 for 115_30t double girder eot crane , bearing for aux hoist hook 1277_01_330_13 for 115_30t double girder eot crane , bearing for pulley of aux hoist _bottom plus eq 1277_01_330_ah_be for 115_30t double girder eot crane , bearing for cross travel wheel 1277_01_110a_07 for 115_30t double girder eot crane , bearing for long travel wheel 1277_02_110a_07 for 115_30t double girder eot crane , bearing for bearing block of main hoist ropedrum 1277_01_215_brg for 115_30t double girder eot crane , bearing for bearing block of aux hoist ropedrum 1277_01_315_brg for 115_30t double girder eot crane //bid details 2 / 33

CTN :39113802

14 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of shaft sleeve , impeller , impeller nut , shaft sleeve , impeller nut , impeller nut , impeller , impeller nut , shaft , shaft sleeve , wear ring , mechanical seal part no 14350 rn 12ee000c0067 , mechanical seal , mechanical seal , mechanical seals , mechanical seals , spacer sleeves , set of lock washers , set of gaskets , set of motor bearings , set of motor bearings , set of motor bearings , set of motor bearings , set of motor bearings , set of pump bearings , set of pump bearings , set of pump bearings , shaft sleeve , impeller , shaft , lock tab washer , elastic washer w27d127bm27va4 , o ring , gasket un 65/80x12

CTN :40899473

04 Aug, 2025 91.67 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-11174 supply of spares for esp of unit 1 to 7 at kstps, kota. - outer arm for emitting rapping sys., outer arm for collecting rapping, inner arm of esp for collecting, u" guide for collecting electrodes with inner distance 44.5 mm for stage- 1 to 2, u" guide for collecting electrodes with inner distance 54.0 mm for stage- 3 to 5, spiral emitting electrode 47 turns, wire, 2.7mm (mat for wire uhb-904 l, mat for hook- tube carbon steel), emitting electrode 2.7 mm wire dia, 52 turns spiral type with hook (material for wire uhb-904 l, material for hook tube carbon steel), sleeve for shock bar of esp with ht bolt & nut (m 20x75), sleeve bearing for emitting drive, set ring for cerm, plain bearing, shaft insulator, g d screen sheet, pin for pin wheel i/ii, shaft-i for cerm d50, l-4790mm, shaft-ii for cerm d50, l-4985mm, emitting rapping shaft 40mm dia, 2500mm length, shaft-iii for eerm d50 l-3350mm, emitting drive shaft for stage 3, dia-40mm, l-3306mm, key size 12x8x70, emitting drive shaft iii, dia-40mm, l-2995mm, ms packing shim, 100 mm x 70 mm, thickness 6mm, pin wheel-i (big), pin wheel-ii (small), shock pad for shock bar for esp, shaft sleeve, od 50mm,id 40.5 mm,length 120mm, shaft-i for eerm, d-50 mm, l-4320 mm stage-ii, shaft-ii for eerm, d-50 mm, l-4250 mm stage-ii, emitting drive shaft -ii, d-40 mm, l-3020 mm stage- ii, end shaft for cerm with key slots, d-50 mm, l-790 mm stage-iii to v, shaft-i for eerm, d-50 mm, l- 3120 mm stage iii to v, shaft-ii for eerm, d-50 mm, l- 3290 mm stage iii to v, top coupling for emitting drive shaft-i , d- 40 mm, shock bar guide (f) for stg.-i , 6 slot, shock bar guide (r) for stg.-i , 4 slot, shock bar guide (r) for stg.-ii , 4 slot, deflection plate ms having size 495x230x2.5mm as per drwing enclosed

CTN :41030874

16 Aug, 2025 5.79 Crore

Karwar - Karnataka

Tender For corrigendum : procurement of fcbt and td auxiliary spares - bushing, countersunk screw m-8, rear thrust pad, gasket paronite (p)oh-(b)t s 1.0 gost 481-80, insert, shaft, impeller, ring, coupling, condensate pump, lock washer, oil retaining ring, turbine rotor assembly, two-half ring, gear shaft, flange, oil retaining ring, coupling, feed pump, jacket, nut, lock washer, intermediate bushing, spinner, nut m64 x 3, jacket, throttle valve, ring, ring, insert, reduction gear case, bolt - m10- 6g x 50, bolt - m10- 6g x 50, bolt - ml2-6g x 30, bolt - ml2-6g x 45, guide blade assembly, hex head nut m-12-6h, hex head nut m-14-6h, hex head nut m-16-6h, nozzle, plug, pocket, semi ring, screw, stud ml2- 6g x 25, stud m12- 6g x 30, stud m14 -6g x 30, stud m16-6g x 40, stud m12- 6g, nut, ring, rod, rod, safety valve, hand oil pump, male threaded-end straightway, bronze threaded-end angle stop valve, hand pump filter, oil indicator, rotor assembly, thrust disk, gland case in two halves, four segment sealing ring, reduction gear rotor assembly, reduction gear rotor, gear, roller, coupling, lock ring, coupling roller, nut m24x1.5-6h 05 06, gear wheel, key, setting ring, ring of two half, spherical washer, cover, gasket, slide valve, special nut, axle box, stud ?8-6g?22 56 029, ring 8?12, cap, gasket, flange, bushing, drive gear, bushing, bushing, bushing, bushing, spring coupling, pin 4?15, bracket, through woven stuffing, key 5?5?30, drive gear, bushing, pin 2?14, gasket, gasket, screw-in union, pin, plug, screw ?6-6g?10 14? 029, lever, jacket, slide valve, bellows, piston, spring, slide valve, speed regulator spring, tension screw, bushing, yoke, ring 2-43.8-4.1, spring, lower bushing of driven screw, lower bushing of driving screw, thrust plate (end thrust bearing), pump half-coupling, flat spring, gasket sail cloth no.1(p)b code no.11102 grade 1,100 cm wid, gasket rubber (i)p(p)-2025 s 2.0, sheild in two half, support pad, guide blades & steam shield, bushing, floating ring of two halves, support pad, sheild, support plate, support plate, thrust pad, valve seat, ball d84, lock washer a.6.08?18?10?, lock washer a.8.08?18?10?, ball link, spherical end thrust bearing in two half, spring, spring, bellow, magnet ball bearing 6010, gasket cardboard ? s 0.3 gost 9347-74, gasket polytetrafluoroethyl ene plate, grade 1 s 2.0, lock washer 10.08?18?10?, lock washer 16.08?18?10?, bolt m10, axle, ball link, end-thrust bearing, bushing, axle, bushing 12x10, shackle, bushing 10x10, cap nut, cross-piece, valve, gasket paronite (p)oh-(b)t s 1.0 gost 481-80, gasket paronite (p)oh-(b)t s 1.0 gost 481-80, lock washer 16.08x18x10t, stud m24, stop valve assembly, stem, valve seat, valve, bellows as an assembly, tail piece, coupling of 2 halves, spring, gasket d 189?153?4, key, key, gasket cardboard ? s 0.3 gost 9347-74, gasket cardboard ? s 0.3 gost 9346-74, gasket paronite a-1 s 1.0 gost 481-80, gasket paronite b-1 s 1.0 gost 481-80, gasket paronite c-1 s 1.0 gost 481-80, lock washer 12. 08?18?10?, lock washer 20. 8?18?10?, lock washer 8. 08?18?10?, spring washer 5 65? 029, spring washer 6 65? 029, stop angle valve dn10 pn 6.4 mpa, lock nut, bolt m12, bolt m10, stud m16, stud m16, stud m20, serrated metal washer, nut m12, nut m10, nut m16, nut m20, special nut, nozzle segment, seal ring - assembl, seal ring - assembl, rear bearing insert, front bearing insert, gland steam regulator assembly, flat spring, membrane assembly, cup, driving half-coupli, ring, driven gear, electric pump shaft, bearing(626)

Central Government/Public Sector

CTN :41162161

02 Aug, 2025 NA

Sundergarh - Odisha

Tender For supply of bushing cam roller pn 10211731 , fuelpump crosshd lifter assy pn 10050747 , ring retaining pn 15345087 , pin fulcrum pn 10050760 f fp lifter , screw seat adjusting pn 10211159 , cam roller pn 10211226 f prl unit , pin cam roller f prl pn 10211172 , cam roller fuel pump pn 10211767 , pin cam roller pn 10050759 f locomotive , pin cam roller pn 10211720 f locomotive , bushing floating fp xhd l pn 10130974 , tee fp support pn 11321167 , screw adjusting fp lifter pn 10210726 , nut special pn 10220070 , cap screw pn 15044075 , cap screw fp lifter lock plate 15043058 , cap screw fp sprt to block pn 15090152 , cap screw fp sprt to block pn 15090218 , screw adj fp x head lifter pn 10210729 , cam shaft assy pn 10030219 f locomotive

Bearing Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government And Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector