Latest bench drilling machine Tenders | Government bench drilling machine Tenders

Central Government/Public Sector

CTN :45114129

22 May, 2026 25.00 Lacs

Bidhan Nagar - West Bengal

Tender For tender for supply of sitc and maintenance of addressable fire alarm and detection system at uco bank - supplying , installing , testing and commissioning approved make microprocessor based multi-loop , networkable addressable 02 loop fire alarm control panel with minimum 10 inch 1024x600 resolution lcd with touch capability , including audible and visible feedback , backlit by a long life , solid-state lcd. it shall also include a full qwerty-style keypad on the color , touchscreen display. the display shall have the ability to scroll events by type (i.e. fire alarm , supervisory alarm , trouble , etc) using the touchscreen with customizable buttons , 10000 history events & autolearn feature for programming. the system can be supported upto 2000 generation zone & 2000 logic zone & 50 releasing zone. the panels in network having true peer to peer provision. the panel shall have provision to support up to 50 releasing zones to protect against 50 independent hazards.the panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop and shall be extendable upto 10 loops. , supplying , installing , testing and commissioning approved make modbus interface gateway for communication with bms / other utilities. modbus shall support supports reads of up to 100 registers at a time. modbus gateway shall act as an independent node communicating on the peer to peer network and shall not be dependent on the fire panel cpu for operation. modbus over tcp/ip , meets ul 864 , 10th edition requirements , supports two modbus masters & monitored 10 cpu nodes . failure of fire panel cpu shall not result in failure of modbus gateway. the gateway card shall be ul listed , the mimic annunciator for the fire alarm control panels (facp). this provides the facp with remote , serially-connected display. a five inch touchscreen display provides system status , point information , and event counters. the display shows two events simultaneously , and pages through up to 50 of the highest priority events in the system. the remote display also provides system control with six programmable softtouch buttons as well as acknowledge , silence , reset and drill. , supplying , installing , testing and commissioning approved make addressable multi-criteria photo-thermal detector with sensitivity range of 0.5 to 4.0% obs/ft.the intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. it shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. the detector shall have twin bi-colour led for 360 deg viewing. addressing shall be with user friendly rotary decimal switches. detectors having base addressing must provide protective cap. detectors with soft addressing must provide programming tool. the detector sensitivity (day & night) shall be controlled from the panel to get accustomed to the local environment. the detector shall be ul listed & fm approved. , supply , installation , testing and commissioning addressable self-test multi-criteria photo-thermal detector with sensitivity range of 0.5 %/ft to 4.0 %/ft obs. intelligent multi criteria detection device shall include the ability to combine signal of the thermal sensor with photoelectric signal in an effort to react hastily in the event of a fire situation. , supplying , installing , testing and commissioning approved make addressable manual call point ( break glass type). the device shall have an led which shall blink in normal state & get steady on activation to monitor the heath status of the device. the device shall be ul listed & fm approved. , supplying , installing , testing and commi

Central Government/Public Sector

CTN :45010864

14 May, 2026 NA

Burnpur - West Bengal

Tender For corrigendum : tender for supply of tamping tool pf12spm016 e e - tamping tool pf12spm016 , tool for cleaning the crucible , tool for cleaning the upper part , small drill bit pf12spm027 , tool for cleaning the retort , round brush silicone , scourer for plastometer pf 12 , drill retort exhaust cleaner , funel pf12spm029 , lead bath level gauge pf12spm007 , copper vaseline pf12spm010 , tin lead 10 kg pf 22 sb , stirrer kit pf 22 csc

CTN :44971547

11 May, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of snow white size 8 inch x 10 inch for main switches db , pvc l bend and t junction joint for pvc casing and capping , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , switch socket combination snow white 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , service cable pvc insulated aluminium conductor heavy duty 25 sqmm 4 core , ceiling rose three terminal snow white , led bulk head fitting with led lamp 10 watts , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity dry power type along with its accessories , change over switch 32 amp 4 pole tpn , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanized iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , individual standalone plastic body smoke alarm with adequate provision for fixing on wall oblique ceiling oblique roof , individual standalone plastic body heat alarm with adequate provision for fixing on wall oblique ceiling oblique roof , fire ball extinguisher of 1 point 3 kg wt with suitable provision for wall mounting , double sleeping bunk alongwith rexene sleeved mattress , steel bed side locker of size 1000mm x 1520mm x 450mm , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 x 2 wooden top round tube structure with three drawers , looking mirror of selected quality frameless of size 600 x 450 x 5mm , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 ltrs , portable indoor type high quality kero heater metal body with capacity 4 ltr , plastic dustbin of capacity 40 ltr , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle , hammer 0 point 5 kg with wooden handle , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm best quality , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge comma 20 inch dia , wooden waterproof plywood comma thickness 12 mm , nails various sizes , rammer earth with handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 w electric backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm for electric drill machine , electric tile cutting machine with interchangable blades 20 nos , electric sheet cutter machine with blade 20 nos , puf rivet machine , centre punch 8mm , plumbing tool kit , water level pipe 30 mtr long

CTN :44938214

11 May, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of medium store shelter e e - head fitting hwith led lamp 10 watts rechargeable , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma overall height 1 point 755m , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms plateform and size of wheel 127 mm , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :45099208

20 May, 2026 25.00 Lacs

Mainpuri - Uttar Pradesh

Tender For supply of green , copper wire multistand 1 mm2 x 180 mt black , copper wire multistand 1.5 mm2 x 180 mt red , copper wire multistand 1.5 mm2 x 180 mt yellow , copper wire multistand 1.5 mm2 x 180 mt blue , copper wire multistand 1.5 mm2 x 180 mt green , copper wire multistand 1.5 mm2 x 180 mt black , copper wire multistand 2.5 mm2 x 180 mt red , copper wire multistand 2.5 mm2 x 180 mt yellow , copper wire multistand 2.5 mm2 x 180 mt blue , copper wire multistand 2.5 mm2 x 180 mt green , copper wire multistand 2.5 mm2 x 180 mt black , copper wire multistand 4 mm2 x 180 mt red , copper wire multistand 4 mm2 x 180 mt yellow , copper wire multistand 4 mm2 x 180 mt blue , copper wire multistand 4 mm2 x 180 mt green , copper wire multistand 4 mm2 x 180 mt black , copper wire multistand 6 mm2 x 180 mt red , copper wire multistand 6 mm2 x 180 mt yellow , copper wire multistand 6 mm2 x 180 mt blue , copper wire multistand 6 mm2 x 180 mt green , copper wire multistand 6 mm2 x 180 mt black , copper wire multistand 10 mm2 x 180 mt red , copper wire multistand 10 mm2 x 180 mt yellow , copper wire multistand 10 mm2 x 180 mt blue , copper wire multistand 10 mm2 x 180 mt black , plug top 2 pin 6 amp , plug top 3 pin 6 amp , plug top 3 pin 16 amp , led light connector , pvc saddle clip , dura cell aa 2500 mah rechargeable cell with charger , steel wire 2.5 mm , ciling fan bl dc type 1300 rpm , philips ceiling 12 watt , philips ceiling light 31 watt , blower 13000 rpm 700 watt , cable cutter , electrical gloves kelvin tools 40082 linman , half round file 15 inch , flat file , three square trinagular file , flat chisel 1 fit 8 inch 16 inhc , grinder 5 inch , mallet rubber hammer , pulley 3 well , rope 32 mm 40 meter , measuring tape 9 meter , hammer 3 kg , hammer 300 gms , janison crimping tool 0.5 mm to 16mm , mini hackwas frame , mini hacksaw blade jk , hacksaw frame , hacksaw blade jk , monkey plier taparia 250 mm , 12 inch screw driver , 18 inch screw driver , wire stepper phy , tester light , drill bit 8 mm , drill bit 10 mm , drill bit 6 mm , 6 meter or 10 meter , swithc 5 amp , socket 5 amp 5 pin , mcb 1 pole 16 amp , mcb 1 pole 32 amp , mcb 1 pole 10 amp , mcb 1 pole 6 amp , flood light 100 watt , flood light 250 watt , flood light 500 watt , road light smps 100 watt , 2 core cable .75 mm x 2 , 2 ciore cabke 1.5 mm x 2 , 2 core cable 2.5 mm x 2 , 4 core cable 2.5 mm x 4 , 4 core cable 1.5 x 4 , 3 core cable 1.5 x 3 gang box pvc 10 way , gang box pvc 12 way , gang box pvc 03 way , gang box pvc 05 way , gang box pvc 08 way , gang box pvc 14 way , combind box 6 amp x 2, combind box 16 amp x 2, 2 pole mcb box pvc, 4 pole mcb box pvc, brass screw 1 inch, brass screw 1.5 inch, brass screw 2 inch, brass screw 2.5 inch, brass screw 3 inch, brass cup varshal, pvc casing capping 16 x 16 mm, pvc casing capping 25 x 16 mm, pvc casing capping 40 x 16 mm, grinder blade 5" (metal), wire circle clip 1.5 mm, wire circle clip 2.5 mm, wire circle clip 4 mm, wire circle clip 6 mm, wire circle clip 10 mm, wire circle clip 8 mm, pvc saddle clip double clip 25 mm, pvc saddle clip double clip 32 mm, casing button clip, 1 mm 2 core multistand wire, cable tie 100 x 2.5, cable tie 150 x 2.5, cable tie 200 x 4.8, cable tie 400 x 4.8, pvc gulli 4 mm, pvc gulli 6 mm, pvc gulli 10 mm, fastner 8 mm, fastner 10 mm, gypsum screw 1.5 inch, gypsum screw 2 inch, gypsum screw 2.5 inch + 1 inch , wooden screw 1.5 inch, wooden screw 2 inch, wooden screw 2.5 inch, fan regulator knob (cap mini), fan regulator know (cab big), 16 mm2 lugs al, 70 mm2 lugs al, 35 mm2 lugs al, condensor 2.5 mfd (gc //bid details 2 / 119

CTN :45126705

14 May, 2026 NA

Vellore - Tamil Nadu

Tender For tip tool and drill bit

CTN :45085574

15 May, 2026 NA

Aliganj - Uttar Pradesh

Tender For providing of design installation and maintenance of educational lab/centre - vocational lab; supply and installation of hardware - connecting screwdriver, neon tester, screw driver set, insulated combination pliers, insulated side cutting pliers, long nose pliers, soldering iron, electrician knife, tweezers, digital multi meter, soldering iron changeable bits, de-soldering pump, steel rule, steel measuring tape, tools maker vice, crimping tool (pliers), scriber straight, allen key set, double ended spanner, magnifying lenses, hacksaw frame adjustable, cold chisel, scissors, handsaw, drill machine (electrical), first aid kit, fire extinguisher, bench vice, dual dc regulated power supply, lcr meter (digital), cro dual trace (component testing facilities), battery charger, analog multi meter, function generator (triangular, square and sine wave), electronic work bench, comprising of dc power supply, dmm, amm, cro, function generator, dimmer-stat, component, tray, soldering station., dimmer state, analog component trainer, op amp trainer, digital ic trainer, digital ic tester

CTN :44959359

08 May, 2026 NA

Sonitpur - Assam

Tender For bid to ras supply of large store shelter c c - oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round or square block , fire extinguisher of 1 kg capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma overall height 1 point 755m , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms plateform and size of wheel 127 mm , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :45024534

11 May, 2026 NA

Gurdaspur - Punjab

Tender For corrigendum : supply of as per bid d d - crocdial clip earth , cordless impact wrench , steel jack 3 ton , stainley grinder , scissor , steppler gun machine , measusring tape , gloves , crimping tool , welding rod holder , steel scale 2 ft , welding helmet , goggles , bosh hammer drill machine

Central Government/Public Sector

CTN :45114820

28 May, 2026 NA

Vadodara - Gujarat

Tender For supply of refer to the attached specifications , item sr no - 25 - c clamp set only sutaibal for dvvnn 2525m16 - please refer to the attached specifications , item sr no - 26 - insert only sutaibal for tgfh 32-5 - please refer to the attached specifications , item sr no - 27 - parting blade only sutaibal for tkn5 insert - please refer to the attached specifications , item sr no - 28 - grooving tool insert - please refer to the attached specifications , item sr no - 29 - side tool holder sandvik - please refer to the attached specifications , item sr no - 30 - inserts - please refer to the attached specifications , item sr no - 31 - inserts - please refer to the attached specifications , item sr no - 32 - spare lever - please refer to the attached specifications , item sr no - 33 - screw - please refer to the attached specifications , item sr no - 34 - shim - please refer to the attached specifications , item sr no - 35 - inserts - please refer to the attached specifications , item sr no - 36 - parting tool blade - please refer to the attached specifications , item sr no - 37 - insert - please refer to the attached specifications , item sr no - 38 - parting tool blade iscar - please refer to the attached specifications , item sr no - 39 - inserts iscar - please refer to the attached specifications , item sr no - 40 - thearding holder external - please refer to the attached specifications , item sr no - 41 - thearding insert -external - please refer to the attached specifications , item sr no - 42 - thearding insert - external - please refer to the attached specifications , item sr no - 43 - thearding insert -internal - please refer to the attached specifications , item sr no - 44 - thearding insert -internal - please refer to the attached specifications , item sr no - 45 - tool holder - please refer to the attached specifications , item sr no - 46 - inserts - please refer to the attached specifications , item sr no - 47 - tool holder - please refer to the attached specifications , item sr no - 48 - spare screw - please refer to the attached specifications , item sr no - 49 - insert screw, 5513-020-01 indstl. std - please refer to the attached specifications , item sr no - 50 - shim - please refer to the attached specifications , item sr no - 51 - inserts - please refer to the attached specifications , item sr no - 52 - tool holder - please refer to the attached specifications , item sr no - 53 - inserts - please refer to the attached specifications , item sr no - 54 - tool holder - please refer to the attached specifications , item sr no - 55 - inserts - please refer to the attached specifications , item sr no - 56 - spare-lever - please refer to the attached specifications , item sr no - 57 - screw - please refer to the attached specifications , item sr no - 58 - shim - please refer to the attached specifications , item sr no - 59 - shoulder milling cutter -dia 125mm, 85mm - please refer to the attached specifications , item sr no - 60 - taps sets- inches - please refer to the attached specifications , item sr no - 61 - taps sets-inches - please refer to the attached specifications , item sr no - 62 - tap set metric - please refer to the attached specifications , item sr no - 63 - tap set metric - please refer to the attached specifications , item sr no - 64 - tap set metric - please refer to the attached specifications , item sr no - 65 - tap set metric - please refer to the attached specifications , item sr no - 66 - tap set metric - please refer to the attached specifications , item sr no - 67 - tap set metric - please refer to the attached specifications , item sr no - 68 - taper sank drill - please refer to the attached specifications , item sr no - 69 //bid details 2 / 74 - taper sank drill - please refer to the attached specifications , item sr no - 70 - taper sank drill - please refer to the attached specifications , item sr no - 71 - taper sank drill - please refer to the attached specifications , item sr no - 72 - ta

Bench Drilling Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector