Latest bench folder Tenders | Government bench folder Tenders

State Government

CTN :41502899

10 Sep, 2025 NA

Delhi - Delhi

Tender For tender for supply of providing 3 seater stainless steel 304 grade , installationn of 3 seater ss 304 grade s.s bench without back support & hand rest. , providing and placing steel clothes lockers overall size 915(w) x 480(d) x 1980(h) mm with unit size 450 x 457 x 450 with all accessories having 8 lockers made of ms sheet front openable shutter with ms sheet of thickness not less than 20 gauge and other sides the thickness of ms sheet should not be less than 22 gauge. , providing and placing steel clothes lockers overall size 915(w) x480(d) x 1980(h) mm with unit size 450 x 457 x 450 with all accessories having 8 lockers made of ms sheet front openable shutter with ms sheet of thickness not less than 20 gauge and other sides the thickness of ms sheet should not be less than 22 gauge , powder coated ife locking arrangement and fitting etc. , complete as per direction of engineer-in-charge. , providing and placing steel clothes lockers overall size 915(w) x480(d) x1980(h) mm with unit size 450 x 457 x450 with all accessories having 8 lockers made of ms sheet front openable shutter with ms sheet of thickness not less than 20 gauge and other sides the thickness of ms sheet should not be less than 22 gauge , powder coated ife locking arrangement and fitting etc. , complete as per direction of engineer-in-charge.

Central Government/Public Sector

CTN :41487269

09 Sep, 2025 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of supply and installation of 304 grade stainless steel 4 seater bench, design and specification as per rdsos specification enclosed herewith(back rest with seat partition) drg rdso/wks/2018/2 d1 05.06.2018), bench should de installed at station, station and qty, at each station will be advised by this office, furniture steel. 12 compartment steel cloth locker h 2000mmw * 910 mm x d 550 mm, material: ms sheet conforming to commercial quantity cr-1, grade 340 of is 513:2008, sheet thickness: 0.8 mm. make neeman or similar. as per gem product id :5116877-89713609183., office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5 * 2.5 * 2.51 make jalaran, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca, central table rectangular shap with ss base and wooden top of size 1 * 2 * 1.54 design, size, and brand to be approved by c.a.), office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5 * 2.5 * 2.51 make jalaran, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca, office table ms frame with 3 drawer 1 box wooden top laminated sun mica, size 5 * 2.5 * 2.5 | make jalaram, stellar, methodex, godrej or better quality, size, design and brand to be approved by ca

State Government

CTN :41469243

29 Aug, 2025 9.50 Lacs

Jaipur - Rajasthan

Tender For tender for supply of various instrument and equipment items --, allis tissue forceps (made of stainless steel), , almirah big without locker, , almirah small without locker, , ambu bag (made of silicone), , artery forceps straight (made of stainless steel), , artery forceps curved (made of stainless steel), , attendant bed size iron bench, , aspiration needle insulated (made of stainless steel), , asepto syringe with bulb make - romson, , b.p. instrument (should have isi mark & measuring range from c to 300hg), , babcock tissue forceps (made of stainless steel), , bed side locker:, , bed side screen 3 fold with curtain, , dittel's bladder sound 25 cm long (made of stainless steel), , blood glucometer isi/iso certified (accusure), , blood glucose glucometer isi/iso certified (on call plus), , blood/fluid warmer 3m ranger medical device (smiths/technocare/remi) iso/ce mark, , busch's episiotomy scissors (made of stainless steel), , busch's episiotomy scissors s,s. tcb tip, , cardiac table/over bed table, , cervical punch biopsy forceps (made of stainless steel), , chaetal forceps (made of stainless steel), , cheatle forceps stand/jar (made of stainless steel), , -, , curette sharp & blunt (made of stainless steel), , cusco's speculam with plastic coated (disposable & reusable), , cusco's speculum (made of stainless steel), , computer table size 36"x24"x30" made of mdf board, , cylinder trolley big (m.s.), , cylinder trolley small (m.s.), , d&c set of 14 instrument (made of stainless steel), , deaver's abdominal wall retractor (made of stainless steel), , desecting plain foceps (made of stainless steel), , desecting tooth foceps (made of stainless steel), , digital room temperatur & humidity thermometer, , dmp tvs hd 250 gold :-, , donor weight machine upto 2.00kg isi mark, , doyen's abdominal wall returning retractor, , dressing drum (made of stainless steel grade - 304), , dressing container with lids cover (made of stainless steel), , dressing/injection trolley with bowl & bucket size 34"), , (40 x 20 x, , dressing scoop (made of stainless steel), , electric suction machine 1/4 hp high vaccum, , fine scissor straight (made of stainless steel), , fine scissor curved (made of stainless steel), , foam mattress for hospital iron bed size - 72x36x4", , foam mattress for patient examination coach/table/stracture trolley 72x20x2", , foam mattress for patient stracture trolley 72x20x2", , foetal doppler, , fogging machine, , foot step (double step) uses size - 45x43x35cm, , attach, , foot step (single step), , name of items, , formaline chamber thickness of the acrylic sheet should be 4/5mm., , height adjustable & 360° swivel revolving chair with footrest for office, , hospital trolley iron heavy duty with 3 plastic bucket set bucket capacity 25 ltr.with lid, , name of items, , hospital bed ms pipe frame plain size 72x36x4", , hospital wash basin stand with chilamchi g 304, , hospital/surgical bowls round surface and smooth & sharp finish. (made of stainless steel), , hospital soiled linen trolley with canvas bag, , hsg canula with lock set (made of stainless steel), , inlet obstetrical forceps (made of stainless steel), , name of items, , hsg canula without lock set (made of stainless steel), , instrument tray with lid (made of stainless steel), , iron rack 20 gauge (grey) 14 gauge angle, , iron stool fix 4 leg with top, , kidney tray (made of stainless steel), , knife handle (made of stainless steel), , kocher artery forceps straight (made of stainless steel), , kocher artery forceps curved (made of stainless steel), , kelly's placenta forceps (ppiucd forceps), , 5mm laparoscopic monopolar maryland non tramaticdissecting forceps, , laparoscopic instruments gall bladder claw grasper forceps (made of stainless steel), , l-hook regular (made of stainless steel), , laparoscopy grasper tooth (made of stainless steel), , laparoscopy grasper non tooth (made of stainless steel & plastic), , laparoscopy bo

CTN :41290270

22 Aug, 2025 NA

Muzaffarpur - Bihar

Tender For bid to ras supply of ac voltmeter , ac voltmeter 0-150 , ac ammeter , function generator , single phase variac , dc voltmeter 0-15 , dc voltmeter 0-150 , dc ammeter , earth resistance tester , d. c. regulated power supply , tachometer , rheostat , electrical tools bag , electronic work bench , build a voltage divider bias circuit and measure the terminal currents & terminal voltages of the vo , build the ce, cc and cb amplifier circuit and verify the input and output characteristics. and build , dso(100mhz) , v-i characteristics of scr , measurement of current and voltage in a branch of the given electrical circuit using kirchhoff s cur , measurement of load current in load resistance using thevenin s theorem, norton s theorem, maximum p , measurement of open circuit(z) parameter, short circuit(y) and abcd parameter of a two-port network. , characteristics of triac, . , r and rc triggering circuit of scr. , breadboard , b. h curve apparatus kit , demonstration of faraday s laws of electromagnetism. , test the performance of zener diode/pn/led , test the functionality of half wave rectifier and full wave rectifier and bridge , implement logic gates using universal nand gate ic, nor gates and universal gates , half adder and full adder using gates , sr, ms-jk, d and t flip using ic 7476(all in one) , test the functionality of dac and adc using ic. , passive components , r and rc ujt triggering circuit of scr , half wave and full wave converter with r and rl load and freewheeling diode , characteristies of igbt, mosfet, fet , chopper circuit , inverter circuit(series and parallel) , forced commutation circuit (a, b, c, d and e) , single phase step-up and down cyclo converetr , scr single and three phase half-full controlled bridge converter , dc to dc converter trainer (buck, boost and buck-boost converters) , scr single phase dual converter trainer , discrete component trainer , total station , gps instrument , tilting level , two hinged arch , water absorbtion test apparats for aggregate larger than 10mm or between 40mm and 10mm , vessel for water absorbtion test of aggregate smaller than 10mm , miscellaneous tools , cylindrical steel cup, metal hammer , bourdon's gauge , piezometer , flywheel apparatus , laboratory permiability apparatus(constant head and falling head) , calibrating glass tube , steel cylinder, cylindrical metal , jar testing apparatus with jars , burrete, burette stand, conical flask, pippette , bod apparatus , suspended solids, dissolved solids, and total solids measuring apparatus , bod incubator , digital balance, hot air oven , test tubes , beaker , digital thermometer , u tube manometer , dial gauge stand , silver sulphate , dpd (diphenyle paraphenylene diamine indicator , shear strength testing machine , digtal chlorimeter , watt meter

CTN :41315694

23 Aug, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of supply of pre cast rcc box culverts of internal size 1000mm x 2000mm x 1600mm with outer wall thickness 250mm , cement ppc opc 53 grade in polythene of 50 kg each , sand coarse , stone aggregate coarse 40mm , graded stone aggregate coarse 20mm , qick setting coumpound , angle iron fencing post fabricated with isa 65x65x6mm of 3 point 75m long including 0 point 75m y shaped swan at top with 45 degree to vertical plane all as per brief technical specifications , angle iron corner post struts fabricated with isa 65x65x6mm of 2 point 43m with split ends at one side two nos holes suitable for 12mm dia bolts all as per technical specifications of and drawing , flat iron 40x3mm 2 point 20m long with five holes for 12mm dia bolt all as per technical specifications of and drawing , ms black bolts 12mm dia 50mm long with one hexagonal nut and two 3mm washer , flat iron 25x3mm 3 point 0m long with seven holes for 8mm dia bolt all as per per technical specifications and drawing , ms black bolts 8mm dia 50mm long with one hexagonal nut and two 3mm washer , galvanized steel chain link fence manufactured with 3.80mm dia galvanised steel wire with mesh size 50x50mm nominal pitch of wires mesh in roll of 15x2 point 40m as per technical specifications , galvanised steel brt wire shall have a tensile strength of between 60000 and 80000 pounds per square inch all as per technical specifications , 600 mm dia steel wire entanglements with galvanised steel concertina coil reinforced with punched chrome as per technical specifications , paint synthetic enamel black colour , painting brush 2 inch , red oxide primer , ms steel wicket gate 1 point 20m wide single leaf 2 point 10m height fabricated all as per as per technical specifications and drawing , supply solar lantern model no ms122 solar lantern contains battery solar panel led bulbs and automatic charging of working time 25 hours all as per technical specifications , pre cast rcc bench of size 1000 l x 300 w x 100 thk mm with 3 x u shaped legs providing with fixing arrangement by using nut and bolt , 60mm thk heavy duty rubberised mat finish paver block tiles m 40 grade of size 0 point 20mx0 point 10m including levelling and dressing of surface all as per tech specifications , transparent pipe 5mm dia bore for water leveling , plaster trowel with wooden handle , fish line , plumb bob iron , galvanised iron pan mortar tasla 18 gauge 16inch dia minimum weight of 1 kg , rammer earth with handle min wt 5 kg without handle , picks axes with chiesel and point ends kudali 14 cp nominal wt 3 kg overall length min 595mm with handle , showel square nose 14 gauge tata high carbon steel blade size 310 x 245mm shaft size 710mm fitted with strong steel crutched wooden handles , multipurpose non slip rubber reusable gloves for scrubbing cleaning brick work etc colour olive green and black , brick trowel steel 305 mm , gum boot best quality , plaster rod 1 point 2 m long , water bucket steel 13inch dia , crow bar 5 point 1 kgs , measuring tape 5 mtr , measuring tape 15 mtr

CTN :40912180

21 Aug, 2025 9.79 Crore

Nagpur - Maharashtra

Tender For corrigendum : establishment of integrated analytical laboratory for demil plant - hot air oven, magnetic stirrer, heating cooling circulator, rotary evaporator with chiller and vacuum pump, ultrasonic cleaner, high speed orbital shaker, vacuum pump, peristaltic pump, benchtop ph meter with orp electrode & necessary buffers, electrode storage solution & electrode cleaning solution, dissolved oxygen meter, turbidity meter, bench top multi-parameter tester (conductivity, tds, salinity, ph), bod incubator, cod digestor system, vortex mixer, effluent sampling manifold (esm) with controlled cobustion chamber (ccc), analytical balance, laboratory balance, mini centrifuge machine, gyro shaker, melting point apparatus, electric bunsen burner, deep freezer, laboratory rrefrigerator, ultra-pure water purification system, muffle furnace, double distillation unit, probe sonicator, heating mantles, systematic design, partitions, equipment console with work and storage modules, chemical reagent console with work and storage modules, instrument console with work and storage modules, overhead storage console, extended office console, office console, file storage console, record management console, back positioning module, fire protection modules, fume closet, exhaust manifold, power reserve (40 kva), elemental (chnso)analyzer, inductively coupled plasma - mass spectrometer (icp-ms), microwave digestion system, amc cost for 1st year after expiry of warranty period, amc cost for 2nd year after expiry of warranty period, amc cost for 3rd year after expiry of warranty period

CTN :39038241

30 Aug, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20no’s), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, battery–charger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injector–multi hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineer’s square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, an

CTN :41066336

14 Aug, 2025 NA

Meerut - Uttar Pradesh

Tender For bid to ras supply of synthetic badminton court with allied accessories e e - asphalt base badminton court , synthetic badminton court , heavy duty steel pipe , ms pool with flood lights , shade sidewall with cgi sheets , bench

CTN :40540796

11 Aug, 2025 NA

Delhi - Delhi

Tender For provn of indoor gym - brick work side wall including labor charges , flooring work 3 pcc base with 124 ratio of cement chambal and gitti 20mm slope , ms frame wok ms pipe use 2 and 3 with 16 gage , roof work branded cgi sheet size 14 3.5 with 26 gage , aluminum window size 4x4 with 3 way , aluminum door , mirror with 5mm thickness including installation charges , flooring mat 15mm thickness , air conditioner 1.5 ton 3 star voltas , false ceiling designer gypsum premium quality size2x2 , ceiling fan bajaj , false ceiling light havells , electric work with wire cable use havells poly cab and mcb box , treadmill , cross trainer , upright bike , transformers , multifunction gym , adjustable bench , dumbbell rack , dumbbell , kettle bell , weight plate , olympic barbell 7ft , olympic curl bar , beauty bells , construction of 4x4 ft toilet with western type tiles work and mirror , distemper and paint work use branded material , 300w music system jbl and above , led tv 32 lg samsung

Central Government/Public Sector

CTN :41330287

26 Aug, 2025 NA

Ratlam - Madhya Pradesh

Tender For tender for supply of supply installation and commissioning ofcomputerized (automated) distributor valve(dv) endurance test bench ( for all make) withdigital pressure gauge and timers and pcbased data acquisition system as perannexure-a and drawing no.- g/sd 8-260attached , supply of otdr suitable for 1310/1550 nm fiberwith are solution of 60 cm / better, dynamic range of35/32db or better with all accessories, ac adopter/charger, rechargeable battery manual, hard and softcarrying case,complient with tec specificationno.etc. gr/tx/otd-01/04 apr-2010 with latestamendments with all accessories (vfl facility,internal memory, usb/ ethernet facility, compatiblewith fc, sc, lc, etc. (make yokogawa aq121,fujikura, sumitomo) , supply of remote alarm units forgeneration of alarm at station as per thebattery health monitoring unit , "supply of ofc splicing machine. makefujikuraisumitomo/ mophorn/stanlay/fittel asper specification." , expandable polyurthane foam spray of capacity750ml(minimum). make-loctite, abro, pidilitezorrik, gree r9, essrbond or similar , air compressor elgi model no: trc2507 suitable asper elgi part no s07050 for 1400 hp demu/dpcmake/brand: elgi , cec. , "supply of 2 kva ups 160-260v, single phase, 50hz,spwm true on line double conversion ups withigbt module based inveners having transient surgeprotection,monitoring by lcd display of l/p & o/pvoltage/current & battery voltage charging anddischarging, battery with ms stand of" ,

Bench Folder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector