Get complete information related to latest Bench Vice Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bench Vice Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bench Vice Tenders.
Tender For supply of allen hex socket for cordless impact wrench, bit set h4,h5,h6,h8,h10,h12,h14 ,h17 [ warranty period: 30 months after the date of delivery ]
Tender For tender for supply of c clamp 50mm , c clamp 75mm , c clamp 100mm , c clamp 250mm , c clamp 300mm , benchvice 100mm , benchvice 150mm , b.p.hammer 0.2kg , b.p.hammer 0.5kg , b.p.hammer 0.8 kg , double face sledge hammer 2 kg , double face sledge hammer 3.5 to 4 kg , double face sledge hammer 6 kg , double face sledge hammer 10 kg , welders chipping hammer 500 grams , plastic mallet 1 kg , number punch 5mm , number punch 8mm , number punch 10mm , letter punch 3 mm , letter punch 5 mm , letter punch 8mm , letter punch 10mm , engineers screw driver 200mm , engineers screw driver 250mm , engineers screw driver 300mm , electrician screw driver 150mm , electrician screw driver 200mm , electrician screw driver 250mm , d.e.o.j.spanner af 8 x 10mm , double ended - spanner 11x13 mm , double ended - spanner 12x14 mm , d.e.o.j.spanner af 17 x 19mm , d.e.o.j.spanner af 22 x 24mm , d.e.o.j.spanner af 27 x 30mm , d.e.o.j.spanner af 32 x 36mm , s.e.o.j.spanner af 55mm , s.e.o.j.spanner af 70mm , s.e.o.j.spanner af 75mm , s.e.o.j.spanner af 95mm , s.e.o.j.spanner af 27mm , d.e.cranked ring spanner af 8 x 10mm , d.e.cranked ring spanner af 11 x 13mm , d.e.cranked ring spanner af 12 x 14mm , d.e.cranked ring spanner af 22 x 24mm , d.e.cranked ring spanner af 27 x 30mm , d.e.cranked ring spanner af 32 x 36mm , d.e.cranked ring spanner af 41 x 46mm , d.e.tubular box spanner af 22 x 24 mm , bi-hex.socket af 8mm x 12.5mm sq.drive
Tender For tender for supply of bi-hex.socket af 10mm x 12.5mm sq.drive , bi-hex.socket af 17mm x 12.5mm sq.drive , bi-hex.socket af 22mm x 12.5mm sq.drive , bi-hex.socket af 27mm x 12.5mm sq.drive , bi-hex.socket af 32mm x 20mm sq.drive , bi-hex.socket af 36mm x 20mm sq.drive , bi-hex.socket af 46mm x 20mm sq.drive , bi-hex.socket af 50mm x 20mm sq.drive , bi-hex.socket af 55mm x 20mm sq.drive , bi-hex.socket af 55mm x 25mm sq.drive , sq. drive socket /power 17x12.5 mm , sq. drive socket /power 19x12.5 mm , sq. drive socket /power 24/12.5 mm , impact socket af 36mmx3/4 sq drive , bi-hex.socket af 55mm x 25mm sq.drive , allen key af 2.5mm , allen key af 3mm , allen key af 4mm , allen key af 5mm , allen key af 6mm , allen key af 7mm , allen key af 8mm , allen key af 10mm , allen key af 12mm , allen key af 17mm , allen key af 19mm(1603551-1) , allen key af 32mm , adjustable spanner 200mm , adjustable spanner 300mm , pipe wrench 450mm , pipe wrench 600mm , reversable ratchet 20mm sq.drive , reversable ratchet 25mm sq.drive , combination side cutting plier 200mm , combination side cutting plier 250mm , linemans plier 160mm , linemans plier 200mm , ext.circlip plier bent nose 8mm , ext.circlip plier bent nose 10mm , ext.circlip plier bent nose 19mm , ext.circlip plier st.nose 40mm , int.circlip plier st.nose 40mm , metal cutting snip ms 260-s , square file bastard 300mm , three square file smooth 150mm , three square file smooth 250mm , steel measuring tape 10m , steel measuring tape 15m , adjustable tap wrench 6mm , adjustable tap wrench 50mm
Tender For corrigendum : supply of goods, tools & equipment for an international standard itot in mechanic motor vehicle (mmv) trade at iti tarsali, gujarat, india - white board size 1200mm x 900 mm, white board, wall clock, wall charts, transparencies and dvds related to the trade, lapping abrasives (consumable), oil stone, hand rubber gloves, consumables, beaker (consumable), diesel fuel quality test equipment set, 3 wheeler auto rickshaw, 35 kw ev car , work benches with benchvices and storage draws to demonstrate machines, air conditioner, dg set, engineering drawing trainees tool kit, air conditioner , steel rule, steel rule, steel measuring tape, engineers try square, outside caliper, inside caliper, dividers, scriber, knife double blade electrician, wire insulation stripper for shinning conductors, electrician testing pencil (line /neon tester), electrician screwdriver, centre punch, chisel cold flat, hammer ball peen, screwdriver, screwdriver, spanner d.e. set of 12 pieces, combination pliers, side cutting pliers, round nose pliers, flat nose pliers, hand file, hand file, hand file, hand file, hand file, ring spanner set of 12 pieces, feeler gauge 20 blades(metric), file card or cleaner, wire cutter and stripper, allen key set of 12 pieces, calipers, chisels crosscut, chisel, ball peen hammer, hammer mallet, hammer plastic, hammer ball peen, magnifying glass, 'v' block, c clamps, c clamps, c clamps, spanner, adjustable, spark plug spanner, pipe wrench, spanner t. flex for screwing up and up-screwing inaccessible, spanner clyburn, piston ring filing jig, circlip pliers expanding and contracting type, cleaning tray, cleaning tray- aluminum, grease gun, hacksaw frame adjustable, files assorted sizes and types including safe edge file (20 nos), drill twist, metric straight shank, drill point angle gauge, set of stock and dies , taps and wrenches , taps and dies complete sets (5 types), oilcan, thread pitch gauge metric, bsx, bsf, mc, mf & sae, blow lamp, crowbar, hand operated crimping tool, tester sparking plug 'neon' type, drift copper, instructors laptop with latest configuration pre-loaded with operating system and ms office package., lcd projector with screen., multimedia classroom with all equipment as mentioned, all in one copier, computer, ups, desktop computer, cad/cam software, laser jet printer, ups, lcd projector, computer system with latest configuration with , ups, lcd projector screen, document camera / visualizer, smart board / inter active board, over head projector, video camera with stand, printer cum scanner, laptop with all latest os, safety glasses, looking glass, vernier caliper, digital vernier caliper , vernier depth gauge, vernier bevel protractor, least count 5minutes, telescope gauge, dial test indicator plunger type (complete with clamping devices and stand), universal surface gauge, cylinder bore gauge, compression testing gauge suitable for petrol engine., vacuum gauge , granite surface plate, work bench, spanners socket with speed handle, t-bar, ratchet and universal, magneto spanner set, cylinder ridge cutter, vice grip pliers, torque wrenches, pneumatic tools set, car jet washer, pipe flaring tool, pipe cutting tool, universal puller for removing pulleys, bearings, stud extractor set of 3, stud remover with socket handle, paraffin pressure gun, hand reamers adjustable, straight edge gauge, straight edge gauge, ladle, electric soldering iron, wire gauge (metric), digital multi meter, 3 percent digit (min), diode test mode and continuity mode, , growler, hydrometer , battery analyzer with printer, carburetor - solex, mikuni for dismantling and assembling, philips allen key set, starter motor axial type, pre-engagement type & co- axial type in working condition, distributor-duel advance type, reluctance type, fuel feed pump, petrol nozzle, piston ring compressor, piston ring expander, valve spring compressor, valve seat cutter complete set with guide and pilot bar (all angle in a box), timi
Tender For supply of set of battery operated wrench & deep socket as per following annexur e.annexure1. battery operated impact wrench, range - 10 - 450 n-m, brush less,batter y -li aion x 04 nos. per set2. deep socket - 13 mm, 17 mm, 19 mm, 36 mm. x 02 nos per each se t. [ warranty period: 30 months after the date of delivery ]
Tender For supply of 3/4''sq. drive pneumatic impact wrench with pin type socket retainer blows per minute 1000 worki ng torque: 250 - 1250 mm nm (184-922 ft lbs) max torque 1650 nm (1217 ft lbs ), free speed: 6500 rpm, net weight: 3.3 kgs. approx. to be supplied along with suitable qrcs for tool and main pipeline. with socket size: 38 mm & 42mm & 32mm & 50mm. similar to chicago pneumatics model no- cp8272 with sockets. [ warranty period: 30 months after the date of delivery ]
Tender For procurement of various items - 1. battery operated brushless motor rail bolt tightening device (impact wrench) of special extra long socket 46 mm, 32 mm & 28 mm with mobile connectivity feature with additional socket for plate screw removal and insertion 2. electrical operated power chain saw 3. bosch drill machine model no bosch gbh 2-28 dv professional 4. supply of makita jn3201 nibbler 5. portable welding machine 300 amp arc welding 1/2/3 phase 6. clean silica sand, free from clay, loams, mica and other foreign material 7. straw board in sheets grade 'a' to size:66 cms x 77.5 cms x 90 dkg 8 clear polycarbonate sheet , thickness 5 mm ,length x breadth : 8 feet x 4 feet
Tender For supply of miscellaneous fire items for atp, anpara - hose pipe 63mm x 22.5mtr, delivery hoses pipe of male &female coupling 22.5 mtrshould be made of ss 304 and conforming to is 636,, fire bucket, 100 mm 4" steel benchvice, specification : specification for 100 mm (4") steel benchvice - 1. material : steel fabricated vice swivel with fixed base for heavy duty . 2. colour : red. 3. dimension (lxwxh) : 286mm x 128mm x 117 mm +_ 10% ., karabiner, specification : specification for karabiner : 1. shape- d type . 2. srew on biner design. 3.anti skidding . 4. material : aluminum- magnesium alloy. 5. dimension lxb (4.4 x 2.95 inch ) plus .minus 10%. 6. weight: 85 gms plus minus 10%. 7. tension 30 kn having 03 s ew lock. 8. pear shaped facilitate belaying single ropes with a munter hitch. for connecting belay/rappel devices or use at the end of a lanyard., electrical siren, specification: specification of electrical siren 03 km rang ; 1. horizontal, double mounting type. 2. arrangement for mount at high elevation of building. 3. single phase - 220/250 volts. 4. 6000 rpm , 50hz ac. 5. supporting spares for installation and switching device. 6. required wires should be supply along with above electrical siren. 7. audible rang- 3 km., fire gum boot, specification: specification of industrial and protective rubber knee boot is: 5557-2004 . rubber knee boot type -ii , consist of reinforcing fabric made of cotton or manmade fabric having minimum breaking load of 1000 n at warp and 550n at weft, when tested in accordance e with is: 1969 and will be lined with sea table rubber compound. material required for industrial protective rubber boot should confirm table -iii of is- 5557-2004. thickness - the minimum thickness ( rubber and fabric ) of the boot for type ii for various parts and component. all tests confirm to is: 5557-2004. size - 9 and 10, fire helmet ,specification : specification of fire helmet as per bis 2745-1983. 1. shall: the shell of the helmet shall be made of non metallic materials so as meet the test requirement mentioned in bis 2745-1983. 2. protective pad: it shall be of expanded polystyrene or materials of similar properties. 2. retention system : the material for the headband, chin strap and cradle shall be sweat - resistant.,non irritant and shall not cause skin disease. 4. size: helmet shall be of the size having circumstances of inside heaband of 560 m -600mm. 5. construction requirement: the construction of the helmet shall be comply is- 2745-1983. 6. workman ship and finish: all external surface and edges shall be smooth and rounded and there shall be no metallic parts or other rigid projections on t e inside of the helmet. the colour of the helmet shall be inherent white or lemon yellow. 7. mass : mass of the complete helmet excludingvisor may be exceed 800 gm and if exceeds, the mass to the nearest 30 gm shall be marked. 8. performances requirement: the helmet shall be comly all the test mentioned in is-2745-1983. 9. marking : each helmet shall be clearly and indelibly marked with the following- (a) manufacturers name or trade mark. (b) size with colour. (c) year of manufacture, with or with-out vi, fire bell , specification :fire bell as per is: 928-1984, hose winding machine, specification : specification for hose binding machine (manual) carbon steel, as per is: 3744 hose binding machine is used to firefighting hoses to the shanks of couplings, using copper/g.i. wire.itssimpple rugged design ensures long and trouble free operation, and it an easily operated by a single person, with minimal training. different sizes of couplings can be bound using the adaptors provided. brief description: hose binding machine, as per is:3744, made of carbon steel and c.i graded material. the machine shall be suitable for binding firefighting hose on hose coupling shanks using copper or g.i. wire. male and female abaptors of different types and sizes, for binding of hoses can be supplied along with the machine(optional). 1.0