Latest bitumen macadam Tenders | Government bitumen macadam Tenders

CTN :38929384

06 Feb, 2025 1.00 Crore

Palakkad - Kerala

Tender For supply of material for mgnrega - supply of materials, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate 10 mm nominal size, stone aggregate (single size ) 50mm nominal sise, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, through and bond stone size 24 x 24 x 39cm, stone aggregate(single size): 10 mm nominal size, solid blocks of size 40x20x20cm, solid blocks of size 30x20x15cm, twisted steel/deformed bars, royality of good earth, pvc tee 63x63x63mm dia, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, safeda ballies 125 mm diameter, mild steel sheets for tanks, quarry waste, mangalore tile 20mm thick, mangalore ridge tile 20mm thick, pvc elbow 63mm dia, fine sand (zone iv), pvc bend 63mm dia, vitrified floor tile 50x50 cm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 550x400 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 40 mm outer dia 10kgf/cm2, pvc pipe 75 mm outer dia 6kgf/cm3, pvc pipe 110 mm outer dia. 4kgf/cm2, pvc reducer 63x50mm, galvanised weir mesh of average width of aperture 1.4 and nominal dia.of wire 0.63mm, deharadun white lime, green net, dry distemper, water proofing cement paint, synthetic enamel paint in black or chocolate shade, precoated galvanised steel plain ridge, mild steel round bar 12 mm dia and below, welding by electric plant, polyethylene water storage tank with cover and suitable locking arrangemnet, average rate of mild steel round bars for reinforcements, stone aggregate(single size): 06 mm nominal size, interlocking c.c. paver block (80 mm thick, m-30), pvc pipe 63 mm outer dia . 6kgf/cm2, galvanised steel j or l hooks 8 mm dia, bitumen washer, pvc socket /coupling 63mm dia, precoated aluminium trafford sheet 0.350mm thick, precoated aluminium trafford sheet 0.450mm thick, brick tile, rate of casting ring (150 cm dia and 30cm height ) including costing transportion and placing in position, rate of casting ring (120 cm dia and 30cm height ) including costing transportion and placing in position, anjali wood scantles 50x20 mm, pincode wood scantles 50x20 mm, polyethylene bag, cowdung, brick, adjustable telescopic prop 3m, beam clamp 300-380mm, plastic emulsion paint, stainless steel kitchen sink- without drain board 470*420 mm bowl depth 178mm, ceramic glazed tiles ist 300x300 mm in all shades and designs of white, ivory,grey, fume red brown etc.

CTN :38950619

29 Jan, 2025 NA

Idukki - Kerala

Tender For supply of materials for various works under mgnregs for a period of 6 months - stone aggregate (single size): 40mm nominal size, stone aggregate (single size): 20mm nominal size, stone aggregate (single size): 10mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator(needle type 40 mm), stone for masonry work, mild steel tubes hot finished welded type, with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works, welding by electric plant, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, 200 mm aluminium aldrop, red oxide zinc chromate primer, epoxy paint, gi trafford profile sheet 0.35 mm thick, bitumen washer, g.i limpet washer, galvanised steel j or l hooks 8 mm dia, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

CTN :38982768

30 Jan, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply materials for mgnregs works in 18 wards - mini mcf, road, footpath, stone aggregate (40 mm), stone aggregate (20 mm), coarse sand- zone iii (m - sand), portland cement, m s tube, red oxide zinchromate primer, welding by electric plant, gi trafford sheet (0.35mmthick), bitumen washer, gi limpest waher, galvanised steel j or l hooks 80 mm, galvanised steel nuts & bolts 6mm dia and 25 mm long round head, galvanised wire mesh of average width of aperture 1.4 and nominal dia .of wire 0.63 mm, wire nails, epoxy paint, interlock cc paver block (80 mm thick), stone aggregate 6 mm, stone aggregate 20 mm, stone aggregate 10 mm, coarse sand- zone iii (m - sand), portland cement

CTN :39009113

10 Feb, 2025 28.95 Lacs

Thrissur - Kerala

Tender For supply of materials to various nregs (non agriculture)works in pariyaramgramapanchayat - supply of materials to various nregs (non agriculture) works in pariyaram grama panchayat, quarry waste, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, coarse sand (zone iii), portland cement, wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, twisted steel/deformed bars, solid blocks of size 30x20x15cm, coarse sand, g.i pipes 50 mm dia, g.i. pipes 40 mm dia, red oxide zinc chromate primer, welding by electric plant, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, gi trafford profile sheet 0.35mm thick, bitumen washer, g.i limpet washer, galvanised steel j or l hooks 8 mm dia, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, 200 mm aluminium aldrop, synthetic enamel paint in black or chocolate shade

CTN :39032473

31 Jan, 2025 40.29 Lacs

Thrissur - Kerala

Tender For supply of materials at work sites - mgnregs - stone aggregate 40 mm nominal size, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand zone 3, portland cement, wall form panel 1250*500 mm, corner angel 45*45*5mm 1.50m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, quarry waste, m s tube 40 mm dia, twisted steel or deformed bars, interlocking cc paver block (80 mm thick m-30), stone aggregate 06 mm nominal size, stone for masonary work, g.i pipes 50 mm dia, g.i pipes 40 mm dia, red oxide zinc chromate primer, welding by electric plant, galvanised wire mesh of average width of aperature 1.4 and nominal dia of wire 0.63 mm, wire nails, gi trafford profile sheet 0.35 mm thick, bitumen washer, stainless steel screws 50 mm, epoxy paint, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), through and bond stone size 24*24*39 cm, solid blocks of size 30*20*15 cm, pvc pipe 63 mm outer dia 4kgf/cm2, pvc bend 63 mm dia, fine sand (zone 4), bamboo 25 mm dia 2.5 m long

CTN :39078521

06 Feb, 2025 35.46 Lacs

Malappuram - Kerala

Tender For supply of materials - stone aggregate(single size):40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size):10 mm nominal size, quarry waste, coarse sand (zone lll), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wallform panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip, mild steel tubes hot finished welded type, red oxide zinc chromate primer, welding by electric plant, wire nails, galvanized wire mesh of average width of aperture 1.4 and nominal dia of wire 0.63mm, 200 mm aluminium aldrop, epoxy paint, gi plain washer thick, bitumen washer, galvanized steel j or l hook 8 mm dia, precoated galvanized iron profile sheet 0.050mm clt, paving block - inter lock 80mm thick m -30, fine sand, single clip, m.s tube 40 mm dia

CTN :39073217

14 Feb, 2025 NA

Panchkula - Haryana

Tender For tender for supply of tubing gi 15 mm med grade isi marked , tubing gi 20 mm med grade isi marked , glass sheet clear 1200 mm x 1200 mm x 3 point 8mm , cement in 50 kg pack , glass sheet clear 600 mm x 1200 mm x 3 point 8 mm , pvc pipe 100 mm , helical door spring isi marked , glass sheet frosted 1200 mm x 1200 x 3 point 8 mm , m seal in 90 gms pkt , pvc pipe 75 mm , gi union 15 mm med grade isi marked , elbow gi 15 mm med grade isi marked , thread for plumber , glass sheet frosted 600 mm x 1200 mm x 3 point 8 mm , cp brass extension nipple 15 mm x 150 mm , handle pvc with float valve for pvc low level cistren , gypsum screw black 20 mm , gi clamp for gi pipe , gypsum black screw 25 mm , aluminium hasp and staple of size 100 mm , white cement in 1 kg pack , gypsum black screw 30 mm , gypsum screw black 40 mm , mortice lock isi marked for aluminium door , end plug gi 15 mm , rawal plug 35 x 8 mm , stone aggregate 20 mm well graded , sand confirming to zone 3 , tee equal gi 20 mm suitable for gi pipe isi marked , blade cutter iron , washer for cistern , hammer drill bit 40 oblique 8 , pedestal for wash basin , washer for taps , dr fixit for water proofing 1 kg each , painting brush 100 mm , painting brush 50 mm , welding rod , lime quick , plywood bwr 8 feet x 4 feet x 18 mm , pipe clips 3 oblique 4 inch , floor trap 3 oblique 4 inch , p trap 110 x 110 mm , medium density fibreboard mdf both side laminated teak face 2440 mm x 1220 mm x 19 mm , plywood teak face one side 2440 mm x 1220 mm x 12 mm , french polish , beeding teak wood 20 mm x 6 mm , peg hook brass , plywood teakface one side 2440 mm x 1220 mm x 4 mm , lock for almirah squre type 65 mm , touch wood , form cushion 530 x 550 x 100 mm with cover tepastry cloth , spirit base polish spirit incl lakh dana and sundras , magnetic catcher , sliding channel for furniture steel , handle cp for steel almirah as per sample , knob 40 mm brass , screw 50 mm black , screw 40mm black , nails wire 25 mm , screw 60mm black , nails 40 mm 17 oblique 19 no , fevicol sh 1kg pkt , paint synthetic enamelled white 1st quality pack of 4 ltr , paint synthetic enamelled black 1st quality 4 ltr pack , prelaminated board both side laminated 2440 mm x 1220 mm x 12 mm , paino hinges , ss handle d type 75 mm , mdf post forming pft board of size 900 mm x 450 mm x 18 mm , mdf post forming pft board of size 600 mm x 450 mm x 18 mm , mdf post forming pft board of size 1200 mm x 600 mm x 18 mm , plywood bwp 2400 mm x 1200 mm x 12 mm , round conevx mirror of diameter 80 cm made with flexiable polycarbonate front of 0 point 8 mm thickness reinforeced with plastic back of 3 mm thickness with 6 ft height and 50 mm diameter ms pole medium grade duly painted with two coats of synthetic enamel paint over a coat of red oxide primer , road marking paint water based white , road marking paint water based black , road marking paint water based green , road marking paint water based yellow , abs speed breaker h 50 w 350 l 250 , abs speed breaker h 75 w 500 l 425 , abs speed breaker h 50 w 380 l 500 , automatic star delta starter 60 hp , gi tubing 20 mm medium grade , ppr gate valve 20mm , glass sheet frosted 600 mm x 1200 x 3 point 8 mm , pre laminated particle board 8 feet x 4 feet x 12 mm , gi tubing 15 mm medium grade , gi tubing 25 mm medium grade , gi tee 15 mm , bitumen tarfelt 1 mtr wide x 20 mtr long , hack saw blade double edge , brass nozzle 20 mm for fountain , gi tubing 40 mm medium grade , aluminium inline connector 300 sqmm , gi tee 20 mm , mortice lock isi marked for aluminium door , glass sheet clear 600 mm x 1200 mm x 3 point 8 mm , gi nipple 15 mm dia 150 mm long , gi nipple 20 mm dia 150 mm long , aluminium inline connector 185 sqmm , gi elbow 20 mm , ppr pipe 32 mm , brass nozzle 15 mm for fountain , gi union 20 mm , insualtion tape self adhesive 20 mm x 25 mtr long , cement 43 grade 50 kg bag each , automatic star delta starter 12 point 5 hp , gi socket 20 mm , frame plate 12 modular , aluminium i

State Government

CTN :39074298

06 Feb, 2025 16.48 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of post harvest structure including pucca storage at erukady aalamaram at t.r.pattinam (central) vp in t.r.pattinam commune - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement , collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5 , hire charges wall form panel 1250x500 mm , hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip , hire charges m.s.tube 40mm dia , supply of twisted steel / deformed tmt bars fe-500d , supply of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a , supply of bitumen solution primer of approved quality , supply of dehradun white lime , supply of welding by electric plant , supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer , supply of galvanised steel j or l hooks 8mm dia , supply of precoated galvanised iron profile sheet 0.5mm tct , supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists , supply of iron pintels including welded pin , supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer , supply of c.i.pile shoe , supply of m.s.clamps for pile shoe , hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete. , hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete. , hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete. , hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete. , hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete. , hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete. , hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et , production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete. , supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :39061175

30 Jan, 2025 3.48 Lacs

Baramulla - Jammu And Kashmir

Tender For elementary major repair at gms shudwani. - demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: in cement mortar, demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge: in cement mortar., earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: all kinds of soil :, providing and laying of stone soling (hand packed) including ramming, dressing and watering all complete.(incl. all sorts of cost & carriage)., providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. all works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete as per direction of engineer incharge at site., random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: cement mortar 1:6 (1 cement : 6 coarse sand) (quarry), providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete, brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : cement mortar 1:6 ( 1 cement : 6 coarse sand), labour for form work to retain the celing and truss as per direction of engineer incharge at site complete job, labour for dismantling wood work in frames, trusses, purlins and rafters etc as per direction of engineer incharge at site complete job, providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of engineer-in-charge. 35mm first class kail wood complete job, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, painting with synthetic enamel paint of two or more coats on new work approved brand and manufacture on wet or patchy portion of plastered surfaces: as per direction of engineer incharge at site., providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, rise

State Government

CTN :39065668

01 Feb, 2025 9.59 Crore

Bilaspur (Hp) - Himachal Pradesh

Tender For periodical maintenance on cmm nh-205 (old nh-21) 86/00 to 127/00 (sh:- providing and laying 50 mm thick dense graded bitumen macadam and 30 mm thick bitumen concrete,providing and marking of centre line, edge line, zebra crossing,in km 100/310 to 114/150 & 118/370 to 121/973)

Bitumen Macadam Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government