Get complete information related to latest Bitumen Tank Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Bitumen Tank Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Bitumen Tank Repair Tenders.
Tender For repair works for damaged fendering system, steel walkway support structure and allied steel works at hoj-ii, inside dock zone, hdc, haldia, caused by vessel bw loyalty.
Tender For corrigendum : supply of sch viii (supply of needle & syringes) - sch viii (supply of needle & syringes), disposable needle sterile length 1/2" guage 25, suture needle, half circle triangular nos. 2 to 20 (cutting), insulated needle for use with peripheral nerve stimulator 22g x 2" x 50 mm., insulated needle for use with peripheral nerve stimulator 22g x 35 mm., insulated needle for use with peripheral nerve stimulator 24g x 1"x 25 mm., echogent needles for usg guided peripheral nerve blocks 20g / 21g x 100 mm., echogent needles for usg guided peripheral nerve blocks 22g x 50 mm., epidural needles 16 & 18 guage 7.5cm to 11cm (disposable), epidural needles (long length) 18g (more than 100 mm. length), sterile disposable lancet size 28-32 (plastic lancet needle type), sterile disposable hypodermic plastic syringe 20cc, cn. with leur lock, hypodermic syringes,disposable sterile, sterile pack,with/without leur lock, hub 1ml syringe with marking at 0.1 ml, asepto syringe 100 ml of heavy plastic barrel and rubber bulb with marking., bag arm rubber with cover for b.p. apparatus, adult size velcro.rubber bag size 13 x 23 cms., keratome, size 2.8 mm, type-regular(ophthalmic), angle-45 degrees, bevel type- bevel up (pointed)blade-stainless steel/carbon steel,handle- polycarbonate, use- disposable single use, mvr, gauge 23g type-regular(ophthalmic), blade-stainless steel handle- polycarbonate, use- single disposable use, triple lumen catheter 7.5fr with 14g distal lumen, length-15cm. kit contain 1 teflon-coated j nitinol guidewire particularly kink-resistant with guide-advancer. 1 dilator, 10cm long, 3 injection caps, 3 clamps,1 supplementary fixation wing,1 scalpel, 1 syringe 5 ml, 1 adaptor for pressure transducer, 1 puncture needle 18g, 70mm long with a pre-connected valve to aviod air embolism and blood loss, 18g short iv cannula, double lumen subclavian/ jugular catheter kit (adult) ptfe (teflon) cannula curved od 2.7/d 11.5fr-12fr/chx5.3in. (3.8 mm x 13.5 cm) 6 side holes silicon tube s clamping extension, clamp luer lock "y" connector with protective caps size 12.5, 15 with guide wire introducer needle, dialator , 3fr double lumen cvc catheter with 60mm double-lumen polyurethane central venous catheter inserted by seldinger technique, radio opaque material for catheter, the user should be able to choose from 2 type of introducer, i.e.needle 23g or i.v. cannula 22g, latex free, the central venous catheter set should contain: 1 double-lumen polyurethane 3fr catheter, 1 short i.v. cannula 22g, 1 introducer needle 23g, 1 kink resistant guidewire with soft flexible tip, dilator with cylindrical /pencil point tip, 1 secondary fixation wing, 2 injection caps, 1 scalpel, 1.5 ml syringe, peripherally placed radiopaque central single lumen catheter. guage 14/16 (100%) (needles size/catheter size) length - 55cm - 70cm, peripherally placed radiopaque central single lumen catheter. guage 18/20 (100%) (needles size/catheter size) length 30cm - 45cm, fully radiopaque pur catheter 16g for femoral artery centimeter marking from 5-15cm, winged hub for skin fixation, supple distal tip. kit should contain 1 pur catheter with xro lines,1 puncture needle, 1 j guidewire with wishbone-type guidewire advancer, 1 dilator, radial/femoral arterial pe catheter with antikinking collar & fixation wings,straight guide wire, introducer needle.catherter size g- 18, length 10cm, radial/femoral arterial pe catheter 20g, 8cm puncture needle is fitted with a visualization chamber allowing to confirm that the vessel punctured is an artery (pulsatile movement of the blood). the needle is also fitted with a silicone bloodless system valve to avoid loss of blood during vessel puncture and a funnel hub to facilitate the insertion of the guidewire, peripherally inserted central catheter with guide wire with peelable cannula, made of polyurethane, non-toxic, with radio opaque line throughout the catheter with marking every cm with leur connector at proximal en
Tender For auction sale of machineries, electric industrial, non-electric industrial - diesel generator set 300 kva make volv penta, manufacturing year 2003, model number 2100324054, diesel generator set 200 kva make cummins,year of manufacture 1995, model number: 962030856, diesel generator set 75 kva,make ashoke leyland, manufacturing year 1992, diesel generator set 20 kva make kirloskar, purchase year 1991, stp plant 50 kld, with all fabricated platform structure, storage tanks, carbon filter, sediment filter vessel in ms steel , transfer pump, motors 6-8 nos of different capacities and electrical panel.
Tender For corrigendum : supply of suture ctvs d d - monofilament half cirele r b sh dash 1 taper point toungsten rhenium alloy double arm 22mm 4 dash 0 75 cm , polyproplene monofilament tapereut half cirele double arm v dash 5 with firm teflon pledgets 7mmx 3mm x 1 5mm 17mm 4 dash 0 90 cm , polyproplene monofilament half circle round body 16mm single arm 4 dash 0 70 cm , polypropylene monofilament needle suture combination 5 by0 tf dash 1 toungsten rhenium alloy half circle 10mm needle 60cm length d bya , polyproplene monofilament 3 by 8 cirele taper point bv dash 1 hemoseal toungsten rhenium alloy da 9 3mm 5 dash 0 60cm , polyproplene monofilament hcrb d bya half c 13mm 5 dash 0 75 cm hemoseal toungsten rhenium alloy , coated monofilament polybutester 5 dash 0 90 cm d bya t p 3 by 8 circle 13mmm , polyproplene monofilament half circle round body d a 17mm sh 5 dash 0 90 cm hemoseal toungsten rhenium alloy , polybutester monofilament 5 dash 0 blue 90cm cv dash 23 da 17mm 3 by 8 circle , polybutester monofilament 6 dash 0 blue 60cm cv dash 1 da 9mm 3 by 8 , polyproplene monofilament 3 by 8 circle r b double needle tungsten rhenium alloy 9 3mm 6 dash 0 60 cm , polyproplene monofilament 13mm 6 dash 0 3 by 8 circle taper point tungsten rhenium alloy d by a 60cm , polypropylene monofilament 3 by 8 circle taper point tungsten rhenium alloy 8mm 7 dash 0 60cm , polypropylene monofilament 3 by 8 circle taper point tungsten rhenium alloy 9mm 7 dash 0 60cm , polypropylene monofilament 9 3mm 3 by 8 circle taper point tungsten rhenium alloy 7 dash 0 60cm , polyproplene monofilament blue 3 by 8 cutting tapper 6 5mm 8 dash 0 60cm , polyproplene monofilament blue 3 by 8 cutting taper point tungsten rhenium alloy 8mm 8 dash 0 60cm , polyster braided half circle taper cut heavy 4 suture v dash 55 55mm 75 cm green , polyster braided half circle taper cut heavy 4 suture v39 mm 5 75 cm green , braided polyster needle suture combination hc greentaper cut v 5 da 26 mm 90 cm 2 dash 0 , braided polyster needle suture combination 2 dash 0 half circle taper cut v dash 5 26mm needle double arm 90cm length white , braided polyster needle suture combination hc green taper cut v 5 s by a 17 mm 90 cm 2 dash 0 , braided polyster needle suture combination 2 dash 0 half cirele taper cut v dash 5 17mm 17m needle double arm 90cm length white 2 dash 017mm , polyster braided half cirele taper cut d a 5 white 5 green with pledgets 6x3x1 5 mm 26 mm 2 dash 0 75 cm , polyster braided half cirele taper cut d a 5 white 5 green with pledgets 6x3xt 5 mm 17 mm 2 dash 0 75 cm , monofilament 0 polyamide 3 by 8 cirele reverse cutting 70cm 1 dash 0 , monofilament polyamide 3 by 8 cirele reverse cutting 70cm 2 dash 0 , monofilament polyamide 3 by 8 cirele reverse eutting 16mm ethiprime 70cm 3 dash 0 , bone wax 2 5gm by foil , umblical cotton tape 75cm x 3 mm wide , teflon pledget 3 mm x 6mm x 15 mm 6 sterile pledgets per foil , steel monofilament 4x45cm half circle ccs conventional cutting 4x45cm 48mm 2 45cm , steel wire multifilament temporary cardiac pacing wire 18mm tc hc and 63mm straight cutting needle da with breakaway point 60mm 60 cm , silk reel no 1 , silk reel 1 dash 0 , silk reel 2 dash 0 , silicon vessel loops 0 8 x 40 6mmred white blue yellow , eptfe suture cv dash 5 91cm 36inches ttc13 3 by 8 circle 26mm , eptfe suture cv dash 3 122 cm 48inches th26 h 3 by 8 circle 26mm
Tender For custom bid for services - miscellaneous machinery jobs for vessel ma ganga-i 20 fireline mains are to be pressure tested. the relief valve is to be overhauled and pressure tested, and the results are to be shown to the irs/mmd/iwt surveyor. leaky joints are to be renewed with new joints if required. all damaged fire line clamps are to be renewed as per the recommendation of irs/smpa. satisfactory trials is to be given with 02 nos fire hoses in fwd & aft in front of the surveyor. , 1 20.a in-situ pressure testing of fire line pipes up to 100nb 100 mtrs, 2 20.b supply of fire hose-65mm dia 18mtr length 2 nos, 3 20.c remove,refit ,overhaling & pressure testing of relief valve 1 nos, 4 20.d renewal of clamp support 50 nos, 5 20.e new sealing rings are to be provided in all fire hydrants 10 nos, 6 21 "emergency fire pump: pump is to be overhauled. suction (steel pipe size 62mm od short bend,610mm length), and delivery bend (steel pipe size 62mm od short bend with one side threaded 65mm od,610mm length), reducer, suction filter and hard polymer pipes (62mm id 75mm od, suction 12 mtr approx.) are to be renewed., *all spares for pump overhauling will be supplied by smpa." 1 l.s., 7 42 "hydrophore and air bottle: main air bottle fwd and aft outlet cocks (2 nos.) are to be renewed. safety/relief valves are to be renewed. sea water and fresh water hydrophore air charging cocks are to be renewed., **all material contractor supply" 1 l.s., 8 53 "insulation covering and netting is to be removed from the exhaust pipes for main engines and auxiliary engines for surveyors inspection and to be fitted back with new insulation and netting., **all material contractor supply, " 50 per running mtr., 9 54 "air compressor system both air bottle valve found leaking, same are to be renewed. air compressor (specification: tyco, wp-125 psi, tp--210 psi) is to be overhauled and satisfactory trial is to be shown to smpa., *** all spares smpa supply." 1 l.s, 10 55 "exhaust chimney of officer's & crew galley is to be serviced., **all material contractor supply" 2 nos., 11 3 "regarding blowers ( motors 4.1kw/5.5 hp) e/r 2 nos.. supply blower,1 no. e/r exhaust blower on boat deck (aft), its foundation & trunking is to be removed from place for cleaning, including closing arrangement. blower motor is to be overhauled. after proper alignment and balancing all blowers and trunkings, the same are to be fitted back in place. blower bottom water extraction passages are to be made. , *all material contractor supply" 3 per blower, 12 4 "regarding 2 nos.toilet exhaust blowers (motors 3 h.p.-crew and officers' toilet), their foundation & trunking is to be removed from the place for cleaning, including closing arrangement. blower motor is to be overhauled. after proper alignment and balancing all blowers and trunkings,same are to be fitted back in place. blower bottom water extraction passages are to be made. , *all material contractor supply" 2 per blower.
Tender For purchase of biochemisty lab equipments - autoclave (pac), key features- high-pressure vessel: a high-pressure vessel designed to withstand high temperatures and pressures- temperature control: precise temperature control to ensure effective sterilization- timer and controls: easy-to-use timer and controls for convenient operation- safety features: multiple safety features, such as automatic shut-off and overheat protection, to prevent accidents and ensure safe operationconstruction and materials- stainless steel: a durable stainless steel construction to withstand high temperatures and pressures- insulation: high-quality insulation to ensure efficient heat retention and energy savings- door and seals: a secure door and seal system to prevent steam escape and ensure effective sterilizationperformance specifications- temperature range: 121 c to 134 c.- pressure range: upto 30 psi- cycle time: 15-60 minutes- sterilization capacity in liters or cubic feetsafety standards- compliance with regulations: compliance with relevant regulations, such as asme, fda, and iso standards- automatic safety devices: automatic safety devices, such as overheat protection and low-water cut off, to prevent accidents and ensure safe operation- interlocks: interlocks to prevent door opening during operation and ensure user safetyadditional features- data logging: optional data logging capabilities to track temperature, pressure, and cycle data- printed records: optional printed records of cycle data for documentation and quality control- validation and testing: optional validation and testing capabilities to ensure effective sterilizationcapacity- 75 ltr.