Get complete information related to latest Blank Flange Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Blank Flange Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Blank Flange Tenders.
Tender For supply of boq based bid - timing tensioner , control valve , rubber coupling , injector nozzle , engine gasket set , piston assy , main bearing cell , fuel flexible pipe , v belt , oil filter
Tender For supply of fuel filter , oil filter assy , air filter assy , field coil assy , gasket set , bty lead with terminal , rubber coupling , sump gasket , belt fan 7323 section b , door hinge right , socket , gaset set , fuel pipe line
Tender For supply of fuel flexible pipe gen set 4 kva , fuel filter gen set 4 kva , oil filter gen set 4 kva , rubber coupling gen set 4 kva , mtg pad charging set 500w
Tender For supply of pvc swr bend with oval access door 110mm dia , pvc swr bend plain 110mm dia , pvc swr tee 110mm dia , pvc short connection 300 oblique 450mm long , each shelter should have 01 nos of 500 ltrs hdpe water tanks triple layer , ppr gate valve 32mm outer dia , ppr tank connector inner dia 32 mm , ppr elbow 32mm dia , ppr tee 32mm dia , sealing thread , ppr tee reducer 15x 25 mm inner dia , ppr pipe 20mm outer dia with complete fitting , ppr pipe 32mm outer dia with complete fitting , ppr union 32mm dia , ppr socket 32mm dia , ppr elbow 20mm , ppr socket 20mm , ppr reducer socket 32mm x 20mm , cp bib cock long body chromium plated 15 mm dia , cp pillar tap 15 mm bore , cp stock cock of 15mm bore , vitreous china wash hand basin and white and flat back and size 580 x 400mm including cp waste coupling and pvc waste pipe and complete fixing , bathroom cabinet with looking mirror for toiletry items of size 300mm x 450mm with arrangements to fix the same with wall shall be provided , frp iwc of standard size in three cabins with s oblique p trap shall be provided with flushing cistern , ppr wall clamp dia 25mm , 100mm dia stainless steel grating , ss soap dish holder , silicon tube 200gm , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , fd water heating eqpt solar oblique k oil based with 500 ltr tank capacity and made of 2 mm thick stainless steel sheet grade 304 and ms angle and frame legs of size 40 x 40 x 5 mm thick , cgi sheet 3000mm x 900mm x zero point 60mmconfirming to is 277 , gi pipe 50mm dia and 2400 long , barbed wire 14 swg and 2mm thick , laip 45 x 45 x 6mm and 1830mm long , silicon gun for applying silicon tube , drilling machine portable , mason thread nylon 3mm dia x 100 mtr long roll , adjustable spanner 10 inch , screw driver , self supporting aluminium step ladder 6 feet height , trawal brick 250mm , shovel hand gs 12 feet 1 point 6 kg with fibre handle , measuring tape 5mtr retractable grade ai 16 , hand gloves rubber , 02 x mason to be deployed for 01 month to execute the masonry wks required in the job for timely exec of the wk , 01 x plumber to be deployed for 01 month to execute the plumbing wks required in the job for timely exec of the wk , 01 x electrician to be deployed for 01 month to execute the electrical wks required in the job for timely exec of the wk
Tender For spare parts for greave veh - tube part no 1102300, tube part no 1102302, hose part no 1102304, cap upper part part no 1102371, protection grate part no 1103978, control part no 1104198, gasket kit part no 1105809, bracket part no 1109852, bracket part no 1109858, shaft part no 1111475, gasket part no 124982, bulb 5w/24v part no 127990, coupling part no 1308057, pin part no 132650, nut 1/2" d part no 140530, elbow connector part no 140547, elbow connector part no 140549, elbow connector part no 140552, tee- connector part no 140558, elbow connector part no 141383, o-ring 9.2 x 3.5 part no 145526, elbow connector part no 146948, hollow screw part no 152123, bulb sv 5/3w/24v part no 152305, reflector part no 152321, reflector 80 red part no 152322, bushing part no 154984, washer part no 155276, lock part no 159419, handle v part no 166201, handle h part no 166202, plate lock handle v part no 166333, cap part no 169172, lock strap part no 169797, hook part no 169798, flange tube part no 173913, elbow tube part no 178348, clamp strip part no 180025, o ring 31 x 6.5 part no 182931, t-connector part no 183387, lock ring part no 184492, hose part no 186108, window frame, lower part no 186491, seal strip, door l=2000 part no 187649, rubber strip part no 187665, handle, window reg part no 187730, door handle, inner part no 187732, shim part no 187736, washer part no 187965, rubber buffer part no 202063, plate 24 part no 203877, screw part no 203912, warning plate part no 203914, ventilation glass v part no 206415, ventilation glass h part no 206416, glass part no 206419
Tender For purchase of spares - counter plate(f5-3-40) , rear valance (plate iv ai) , cover steer column (plate x a) , filter fuel tank (plate iii c) , liner bearing(b4-3-2 by 03) , seal window rh side (plate iv q) , mat rubber (plate viii e) , horn 12v (plate xxiv b) , adaptor elbow (plate xiv d) , pipe brake rightside 80d (plate xxiii c) , base pre cleaner (plate-xxvi b) , adaptor tee (plate xiv b) , pump seal kit (plate xiv b) , pivot block (plate iv u) , gaiter park brake lever (plate iv a) , mounting cab upper blue a post(plate- iv b) , mounting cab upper green b-post(plate-iv-b) , seal fuse box cover (plate iv ae) , pin slew lock (plate vi a) , bracket mounting fire extinguisher (plate vii e) , switch 12 v (plate ix a) , lever loader control assy (plate x b) , lever loader control 3 spoon , spring (plate xi a) , hose top l h by r h hydra (jcb super plate xiii , hose high pressure (plate xiii ab) , setscrew (plate xvi g) , breather (jcb super plate xix f) , bearing(plate-f5-1-20 by 32) , gasket valve block (ctlg 3dx f5-5-10) , brg needle thrust(plate-f5-1-30 by 9) , pipe brake leftside 80d (plate xxiii c) , bearing liner (plate xxxi l) , lever , bottom gear shift , bearing , radio antenna (plate iv f) , guard hose (plate iii d) , hose hybrid rh outer (plate iii f) , hose hybrid lh outer (plate iii f) , speaker (plate iv f) , retainer top (plate iv am) , retainer side (plate iv am) , switch hand break by brake lamp switch open(c1-16-1) , lever excavator control left hand x pattern , loader excavator control right hand x pattern , adapter filtered m oblique m (plate xv d) , setscrew (plate xvi n) , bolt 1 inch unf x 8 inch long torque 607n-m (jcb super pla , plate brake friction (plate xix c) , ring backup (jcb super plate xix d) , seal astics male assy , brake hose 1 by 4 x 580m (plate xxiii c) , fuel line tank to water separator(plate xxx a) , ball bearing , hose hybrid rh inner (plate iii f) , clamping ring (plate iv y) , cover inner fender rh (plate iv z) , bearing trunnion ram pivot (plate vi y) , pin spring 8 mm clevis (plate x b) , adaptor suction (plate xiv b) , combi seal , disc spring , clip hose (plate xxviii b) , valve non return assy (plate xxx a) , pivot pin , mounting cab lower red b-post(plate-iv) , grommet 22.2mm hole dia by 39.7mm 00 , pivot pin , hose wa feed pipe (jcb super plate xiii d) , adaptor , seal(plate-f1-6-10) , ring backup (jcb super plate xix d) , bearing , pin pivot 44.45 by 44.35x184(plate xxxi f) , hose bsp hp 650mm (jcb super plate xiii o) , hose 1 by 4 bsp 1270mm (plate xiii y) , hose lp 2400 mm (plate xxviii d) , reservoir brake (plate xxiii a) , catch side window lockback (jcb 3dx super page-89) , liner brg 70 mmx60mmx62mm long , pivot pin (ispl sl no 501) , filter breather cap(jcb super iii d-2) , switch panel (plate ix a) , retainer hose (plate iii aa) , cover excavator control lever (plate iv y) , bulk head seal (plate iv am) , lock boom (plate vi v) , brake hose 1 by 4x 760m (plate xxiii c) , lock grille (plate iii q) , pin pivot back(item no-621) , spool adapter solenoid (plate xxi c) , shaft selector (plate xxi c) , brg needle roller , bracket (plate xxx a) , hose 1300 mm (plate xxx b) , plate shim , clutch 1.2mm a by r (jcb super plate xx , sensor vacuum 80m bar (plate xxiv b) , pin pivot union(sl-2240) , side cutter(ms sl-21) , side cutter (plate xxxi v) , bracket engine mounting lh (plate iii n) , gas strut , 700m (plate iii b) , pin pivot (plate iii g) , hose 600 mm (plate xiv d) , pivot pin , hose 06 bsp lp 105 (plate iv a) , pin pivot (plate v j) , switch panel (plate ix a) , panel 12v 2 position (plate ix b) , hose(plate-e1-13-1) , gear planet , brake plate coupling , bearing tapper roller(f5-1-20) , bearing tapper roller(f5-1-20) , pipe pre cleaner (plate xxvi a) , hose (plate xxvi a) , harness grid heater (plate xxvii a) , hose water separator (plate xxx a) , pin pivot (plate xxxi b) , piston oil , console front (plate iv aa) , bearing 50.94x55.9x40 long (plate v i) , bearing tapper
Tender For bid to ras supply of air hose , ampere meter , coupling rubber element , filter element fuel or filter fuel , injector complete , oil filter , pick up switch s 19 , sealing flange rear , v belt coolant pump
Tender For corrigendum : supply of fire fighting items at ssctps, site store, suratgarh fire bucket 9 liters capacity bucket as per is standard design as per is: 2545 made out of heavy duty g.i. , two way dividing breaching made of light alloy as per is: 5131. , hand controlled branch multi purposes branch (nozzle) the nozzle should be adjustable gallonage with multiple flow settings & 63 mm bim inlet hand nozzle. the nozzle should have selectable flow setting of 115-230-360-475-550 lpm @ 7 bar with flush mode without shut off the nozzle made of pyrolite material, with pistol grip made of zytel and with celcon ball valve. the nozzle shall have feature for straight stream & spray pattern. the length of branch should not , exceed more than 10,5" and weight should not exceed more than 2,5kg, the branch should be simple to operate pattern control (1/4 tum from straight stream to fog). it should have minimum fog angle of 110 and raised lug marks straight stream for limited visibility operations. it should be capable of flushing without shutting down or changing stream patterns. the branch should be nfpa 1964 compliant, fm approved & ce certified, the warranty for branch should minimum five years. be , suction adaptors 100 mm female to 63 mm , instantaneous male, , high range zero torque nozzle specifically designed with ergonomics, handling, control, and reduced firefighter fatigue in mind. in addition, the pistol grip and injet swivel are positioned to eliminate the reaction force torque found in a conventional pistol grip designs. nozzle shall be combination of solid stream and fog nozzle with the capability to flow either stream independently or simultaneously. the solid bore shall have field changeable tips with orifices of either 3/8", ", 5/8", %", 7/8", 15/16", 1", or 11/8" and the fog shall flow. the nozzle shall have spinning teeth, multiple pattern detents, flush without shutting down, twist shutoff of the fog stream, and a full time swivel inlet 2 ", the weight of nozzle not more than 4 kg. the baje shutoff of the smooth bore shall be with dual drive trunnions, the nozzle shall also be constructed of lightweight pyrolite, have a shutoff ball with flow diversion for the fog waterway, have a 05 year warranty and meet nfpa , jet- fog type nozzle, conforming to bs: 336, 63 mm male instantaneous inlet connection, aluminum alloy material with natural finish, operating kg/cm2 pressure-10 , inline foam generator, inlet connection63 mm male instantaneous as per bs 336/is: 903 outlet connection- 63 mm female instantaneous as per bs 336/is: 903, foam induction-3 10 6%, maximum working pressure-10 kg/cm2 , seat washer material neoprene rubber is:937, for hydrant valve , fireman axe as per is: 926, made of forged steel, hardened, and having insulated for fire service use. , fire beater as per is: 8096, made of carbon (mild) steel mesh, and having bamboo handle, suitable for fire-fighting class-a , suction strainer for 100 mm suction hose as per is: 907, , fire hook as per is: 927 with bamboo. , armoured suction hose pipe 100 mm x 4.5 mtr length with gm 100mm male and female round threaded suction hose coupling conforming as per is: 902 , jet-spray shut off type fog nozzle 120 conforming to is:952 63 mm male instantaneous connection, inlet gunmetal material with natural polished, operating pressure-10 kg/cm2 , aluminium foam making branch pipe-fb 5x with g,m 63mm male instantaneous inlet with flow discharge capacity 225 lpm@7kg/cm2 with pvc pickup tube and ss strainer , revolving type branch pipe conforming to is:906 63 mm male instantaneous inlet connection, material gunmetal with natural polished, operating pressure-10 kg/cm2, flow-245 lpm 7kg/cm2 , alloy foam making branch pipe of fb-10x-suitable to discharge 450 lpm@ 7 kg/cm2 (made of aluminium alloy construction) with pvc pick-up tube along with stainless steel dip tube suitable for self-induction , ss 63 mm triple purpose nozzle as per is:2871 , ceramic wool fire blanket white,