Latest boat motor Tenders | Government boat motor Tenders

CTN :41185691

09 Aug, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : tender for supply of valves permut and distributor ball valves d d - change over valve complete , moulded valve for security valve at 9 , 6 mbar 18sa000c0063 , o-ring 8.00x1.8020a8 , o-ring 21.30x3.6020a8 , o-ring 37.47x5.3320a8 , steel lock tab washer nd12 , o-ring 30.80x3.6020a8 , lock tab washer nd5 stain less steel , lock tab washer nd8 stainles ssteel , o-ring 16.90x2.7020a8-gn , fiber nbr gasket 90x123x2 , slow operating 8 slide valve on circuit with out vent , slow operating piston valve with venting nd10 , slow operating 5 slide valve on circuit with out vent , slow operating 11 slide valve on circuit with out vent , slow operating 5 slide valve on circuit with vent , slow operating 11 slide valve on circuit with vent , manually-operated distributor nd15-4w-3p rudder gear , hydraulic changeover valve 6-way - 2-position nd20 , ballast tank 1locking distributor(db-main vent opreting sys) , steel non return valve dn32 od38 with plastic valve , type a ball valve assembly nd100 fq00013 fq-wc system , ball valve type nd65 m3b4r1 outfitted 2 socket flanges , wc system hull valve fq00101 wc -system , security valve at 9 , 6 mbar , slow operating piston valve 014 with venting quipt , slow operating piston valve 014 quipt , sg05.2auma5-prong servo motor for valves , sg10.2auma5-prong servo motor for valves , steel nrv nd32 od38 flat flanges plastic valve , non-return valve 12 on block , nrv with od17.15 ruch fitting for hp air circuit , rotary jack for type a ball valve nd 65-80-100-125 , safety valve nd65 , dn15 safety valve calibrated at 32.4 bar , dn15 safety valve calibrated at 7.2 bar , dn15 safety valve calibrated at 36 bar , safety valve in battery compartment , dn15 safety valve calibrated at 192 bar , slow operating 8 slide valve on circuit with vent , slow operating 20 slide valve on circuit with vent , slow operating 14 slide valve on circuit with out vent , quick operating 5 slide valve on circuit with vent , nd65a-type ball valve-2 socketed flanges , nd50 a-type ball-valve - 1 socketed flange and 1 flat flange , nd80 a-type ball valve - 2 flat flanges , nd32 square valve - 2 socketed flanges , quick operating 5 slide valve on circuit without vent , hp air pressure reducer 250-45 bar for copper ruch circuit , hp air pressure reducer 8-1 bar for copper ruch circuit nd10 , sg 10.2 auma 5-prong servomotor for valves , safety valve nd65 , steel non-return valve nd80 od88.9 flat flange plastic valve , quick ballast tank blow type nd35 non-return valve , slow operating 08 slide valve on circuit with vent , sg 10.2 auma 5-prong servomotor for valves , sg 05.2 auma 5-prong servomotor for valves , lock tab washer nd10 galvanized steel , hp air pressure reducer 45-25-8 bar curuch circuit , hp air pressure reducer 250-45 bar curuch circuit , dn15 safety valve calibrateda t54 bar , hydraulic change over valve 6-way-2-position nd20 , slow operating piston valve 014 , controlled safety valve calibrated at 252barnd12 , dn20 safety valve calibrated at 108 bar , dn15 safety valve calibrateda t9.6bar , hp air pressure reducer 45-27 bar curuch circuit , hp air pressure reducer 8-1 bar curuch circuit nd10 , safety valve 54 bar

CTN :41273491

11 Aug, 2025 NA

Solan - Himachal Pradesh

Tender For supply of water meter 150 mm brass , sluice valve size 150 mm , water meter 40 mm brass , water meter 50 mm brass , water meter 100 mm brass , gi union 40 mm , glass pane pin headed of 3 mm thick of 900 x 600 mm , hand shower with connecting arm for bathroom 380 mm with wall flenge , plywood 7 feet x 3feet x 12 mm , cp waste coupling 32 mm , pre laminated particle board of size 8 feet x 4 feet x 6 mm thick , gi union 25 mm , gi tubing 15 mm , beta valve 15 mm , gi union 15 mm , pvc conduit 25 mm , bathroom corner glass shelf 660 mm x 420 mm x 2028 mm , ply wood 8 feet x 4 feet x 6 mm bwp grade , water meter 20 mm brass , cp curtain rod 25 mm dia , kitchen sink with drainage board stainless steel 1 mm thick x 915 mm x 460 mm , gi nipple 15 x 150 mm , gi tee 15 mm , gi union 20 mm , cp jet spray 1 point 5 mtr tube , gi elbow 20 mm , pvc connection pipe 15 x 600 mm with brass nut , pvc waste pipe 32 x 800 mm , gi socket 20 mm , pvc flat cable aluminium condutor twin core 6 sqmm , bathroom rain showers ss , jumper valve brass with plastic washer for pillar cock 15mm , cotton waste , gi tank nipple 20 mm , gi nipple 15 mm x 100 mm , paint enamlled smoke grey , grease for pump and motor bearings limtom grease 40 30 , flexible pipe 20 mm dia medium grade , m seal , glass pane plain 4 mm thick size 900 x 600 mm , gland packing of size 10 mm thick , stainless steel bracket for curtain pipe 25 mm , gi union 50 mm , glass pane plain 3 mm of size 1200 x 1200 mm , gi tee 20 mm , roller bearing for driving end of 220 hp mortor ksb make beadubg no 320 nu , gi tank nipple 15mm , cable lugs aluminium 120 sqmm , gland packing of size 8 mm thick , rowell plug 38 mm 100 nos in pkt , gi tee reducer 20 x 15 mm , butt hinge ms 75 mm , gi bend 40 mm , brackets for curtain rod cp 20 mm dia pipe , pvc gitti 1 point 5 inch 100 nos pkt , aluminum sliding door bolt 200 mm , gi elbow 15 mm , nut and bolt with washer 25 mm dia , gi socket 15 mm , gi bend 25 mm , gi nipple 20 x 150 mm , lead wool , glass pane plain 900 x 450 mm x 3 mm thick , gi bend 20 mm , brackets for fixing wash hand basin ms 375mm long , helical door spring 150 mm , aluminium floor door stopper 140 mm , paint enamlled og , gi elbow 50 mm , gi nipple 20 x 100 mm , flexible pipe 25 mm dia medium grade , brass spindle for 15mm bib cock , gi plug 20 mm , gi nipple 25 x 100 mm , cp curtain rod 20 mm dia 3 point 65 mtr long , sythetic enamelled paint redoxide 04 ltr container , patch mate road repair material , floor drain traps jali 100 mm with hole , gi plug 15 mm , pvc wash basin pipe 32 mm x1150 mm , screw wood steel 35 x 8 swg , gi nipple 20 mm x 50 mm , gi nipple 20 mm x100 mm , pvc waste pipe 40 x 800 mm , paint enamlled white , cable lugs aluminium 300 sqmm , aldrop bolt aluminium 250 mm , door handle aluminum 150 mm , floor drain traps jali 150 mm , geyser indicator red and green , gi bend 15 mm , teak wood edging 4mm thick 18mm wide 10 feet long , gi nipple 50 x 15 mm , oil bound distamper cream colour 5 ltr container , aldrop bolt aluminium 300 mm , cable lugs aluminium 35 sqmm , putty ready mixed , gi socket 50 mm , paint enamlled blue aquiren , paint enamlled red , butt hinge ms 100 mm , gi elbow 25 mm , aluminium hasp and staple 75 mm , paint enamlled redoxide , nut and bolt with washer 10 mm dia , turpentine oil , silicone sealant in 280 ml , paint enamlled black , door handle aluminum 100 mm , gi socket 25 mm , gi socket 40 mm , pvc sheathed copper conductor twin core flexible wire 0 point 20 , gi tee reducer 25 x 15 mm , thinner in 1 ltr packing , alumium tower bolt 100 mm , brush painting 100 mm , paint brush 125 mm , brush painting 75 mm , brush painting 50 mm , brush painting 25 mm , fevicol sh 997 , ht tape 19mm x 9 point 15 mtr , gi pipe 20 mm dia , gi pipe 25 mm dia , kitchen sink mixer wall mounted 15 mm , door seal bottom , brass float valve 15 mm complete , brass float valve 20 mm complete , door eye hole , wall looking mirror with frame 600x400 , glass putty , gi pi

State Government

CTN :41277846

06 Aug, 2025 NA

Nagpur - Maharashtra

Tender For supply of electrical and water supply material for gp paradsinga foryear 2025-26 - materiyal list water and electric, pvc pipe 4kg 63 mm, pvc pipe 4kg 75 mm, pvc pipe 4kg 90 mm, pvc pipe 4kg 110 mm, pvc pipe 4kg 140 mm, pvc pipe 4kg 160 mm, pvc pipe 6kg 63 mm, pvc pipe 6kg 75 mm, pvc pipe 6kg 90 mm, pvc pipe 6kg 110 mm, pvc pipe 6kg 140 mm, pvc pipe 6kg 160 mm, pvc pipe 10kg 63 mm, pvc pipe 10kg 75 mm, pvc pipe 10kg 90 mm, pvc pipe 10kg 110 mm, pvc pipe 10kg 140 mm, pvc pipe 10kg 160 mm, bleaching powder 25 kg bag, gi pipe 1/2", gi pipe 3/4", gi pipe 1", gi pipe 2", gi pipe 2 1/2", gi pip 3", gi pipe 4", pvc cappling 4kg 1/2", pvc cappling 4kg 3/4", pvc cappling 4kg 1", pvc cappling 4kg 2", pvc cappling 4kg 2 1/2", pvc cappling 4kg 3", pvc cappling 4kg 4", pvc cappling 4kg 5", pvc cappling 4kg 6", pvc cappling 6kg 1/2", pvc cappling 6kg 3/4", pvc cappling 6kg 1", pvc cappling 6kg 2", pvc cappling 6kg 2 1/2", pvc cappling 6kg 3", pvc cappling 6kg 4", pvc cappling 6kg 5", pvc cappling 6kg 6", pvc cappling 10kg 4", pvc cappling 10kg 5", pvc cappling 10kg 6", gi cappling 1/2", gi cappling 3/4", gi cappling 1", gi cappling 2", gi cappling 2 1/2", gi cappling 3", gi cappling 4", pvc elbo 6kg 1/2", pvc elbo 6kg 3/4", pvc elbo 6kg 1", pvc elbo 6kg 2", pvc elbo 6kg 2.5", pvc elbo 6kg 3", pvc elbo 6kg 4", pvc elbo 6kg 5", pvc elbo 6kg 6", gi bend 1/2", gi bend 1", gi bend 2", gi bend 2.5", gi bend 3", gi bend 4", gi bend 3/4", pvc bend 4kg 5", pvc bend 4kg 6", pvc bend 4kg 1/2", pvc bend 4kg 3/4", pvc bend 4kg 1", pvc bend 4kg 2", pvc bend 4kg 2 1/2", pvc bend 4kg 3", pvc bend 4kg 4", pvc bend 6kg 2 1/2", pvc bend 6kg 3", pvc bend 6kg 4", pvc bend 6kg 5", pvc bend 6kg 6", pvc tee 4kg 1/2", pvc tee 4kg 3/4", pvc tee 4kg 1", pvc tee 4kg 2", pvc tee 4kg 2.5", pvc tee 4kg 3", pvc tee 4kg 4", pvc tee 4kg 5", pvc tee 4kg 6", pvc tee 6kg 2.5", pvc tee 6kg 3", pvc tee 6kg 4", pvc tee 6kg 5", pvc tee 6kg 6", gi tee 1/2", gi tee 3/4", gi tee 1", gi tee 2", gi tee 2.5", gi tee 3", gi tee 4", pvc end cap 1/2", pvc end cap 3/4", pvc end cap 1", pvc end cap 2", pvc end cap 2.5", pvc end cap 3", pvc end cap 4", pvc end cap 5", pvc end cap 6", gi end cap 1/2", gi end cap 3/4", gi end cap 1", gi end cap 2", gi end cap 2.5", gi end cap 3", gi end cap 4", pvc mta 1/2", pvc mta 3/4", pvc mta 1", pvc mta 2", pvc mta 2.5", pvc mta 3", pvc mta 4", pvc mta 5", pvc mta 6", pvc pta 1/2", pvc pta 3/4", pvc pta 1", pvc pta 2", pvc pta 2.5", pvc pta 3", pvc pta 4", pvc pta 5", pvc pta 6", saidal piece 2"x1/2", saidal piece 2.5"x1/2", saidal piece 3"x1/2", saidal piece 4"x1/2", saidal piece 5"x1/2", saidal piece 6"x1/2", saidal piece 2"x3/4", saidal piece 2.5"x3/4", saidalpiece 3"x3/4", saidal piece 4"x3/4", saidal piece 5"x3/4", saidal piece 6"x3/4", gi sulisevalue 2", gi sulisevalue 2 1/2", gi sulisevalue 3", gi sulisevalue 4", gi sulisevalue 5", gi sulisevalue 6", flang gi 2", flang gi 2 1/2", flang gi 3", flang gi 4", flang gi 5", flang gi 6", air value 2", air value 2.5", air value 3 ", air value 4 ", air value 5 ", air value 6", pvc reducer 1/2" x 3/4", pvc reducer 3/4" x 1", pvc reducer 2" x 2 1/2", pvc reducer 2 1/2" x 3", pvc reducer 3" x 4", pvc reducer 4" x 5", pvc reducer 5" x 6", gi reducer 1/2" x 3/4", gi reducer 3/4" x 1", gi reducer 2" x 2 1/2", gi reducer 2 1/2" x 3", gi reducer 3" x 4", gi reducer 4" x 5", gi reducer 5" x 6", p.v.c. valve 2", p.v.c. valve 2 1/2", p.v.c. valve 3", p.v.c. valve 4", open well submarsible pump 10 hp, open well submarsible pump 7.5 hp, open well submarsible pump 5 hp, open well submarsible pump 3 hp, bore well submarsible pump 3 hp, bore well submarsible pump 10 hp, bore well submarsible pump 7.5 hp, bore well submarsible pump 7.5 hp, bore well submarsible pump 12.5 hp, bore well submarsible pump 15 hp, starter ltlk 5 hp, starter ltlk 15 hp, starter ltlk 7.5 hp, ltlk star delta motor starter 10 hp, ltlk star delta motor starter 12.5 hp, cable submersible 2.5 mm copper, cable submersible 4 mm copper, cable submersible 6

CTN :41114344

04 Aug, 2025 NA

Chennai - Tamil Nadu

Tender For bid to ras supply of water supply motor mechanical items d d ? g? g - 1.5 hp control panel for submersible motor make bch 1p 230 v , 2 hp control panel for submersible motor make bch 3p 440 v , 6 inches mg ci joint , 6 inches ci sluice valve with flange , 4 inches ci sluice valve with flange , 3 inches ci sluice valve with flange , 7.5 hp control panel 3p 440 v make bch , 5 hp control panel 3p 440 v make bch , metallic blue paint 1 liter nippon , 2 inches paint brush vicky , 5 inches angle grinder 1p 230 v make dewalt , 7 inches angle grinder 1p 230 v make dewalt , 1.5 hp bore well submersible motor pump 1p 230 v 17 stage regular make texmo , 1 kal inches ashirvad pipe o ring , 1 kal inches ci ashirvad adapter male female , 1 kal inches ashirvad pipe red line , 50 mfd capacitor, keltron , 150 to 200 mfd capacitor, keltron , 200 to 250 mfd capacitor, keltron , 6 inches ss saddle piece , 4 inches ss saddle piece , 3 inches x 5.8 inches ss bold and nuts , 3 inches x 5.8 inches ss bold washer , 2 inches x 3.8 inches ss bold and nuts , 2 inches x 3.8 inches ss bold washer , 2 inches x half inches ss bold and nuts , 2 inches x half inches ss bold washer , 1 half inches x half inches ss bold and nuts with washer , 20 hp control panel, make bch, automatic star delta, 3p, 440 v , 20 hp mono black motor pump, make kirloskar,model kds 2050 plus , 20 hp submersible motor pump, make kirloskar, model ks 8b, 100 mm delivery, 3 stage, 3p, 440 v , 5 inches x 3 inches threaded reducer ss bush , 4 inches x 3 inches threaded reducer ss bush , 60 a, mcb, 4 pole, 3p, 440 v with metal box, make legrand , 16 a, mcb, 2 pole, 1p, 230 v with metal box, make legrand , 8 mm gland rope asbestos block , nylon rope 16 mm , coir rope 16 mm , 2 ton chain pulley black, make indef , shaft sleeve for kds 2050 plus, make kirloskar , gland ci for kds 2050 plus, make kirloskar , hand pump base , hand pump nose , hand handle body set , 32mm gi pipe b class medium jindal , m12 hand pump connecting rod 3mtr , m12 hand pump bolt nut and washer , hand pump cylinder , 12 inches wrenches taparia , 18 inches wrenches taparia , 1 kal inches bore clamp ms , 3 inches gi pipe b class medium jindal , 4 inches gi pipe b class medium jindal , 4 inches gi elbow unio , 3 inches gi coupling unio , half inches tap watertec , half inches tap long body watertec , half inches pillar cock watertec , half inches angle cock watertec , half inches x 6 inches gi pipe nipple b class , half inches x 12 inches gi pipe nipple b class , half inches gate valve brass life , hand pump bucket washer , rubber gasket sheet 4 mm , hand pump chain make ii , hand pump chain with bolt and nuts , hand pump handle axle ss , hacksaw plier bahco , castrol oil 1 liter can , castrol grease 1 kg , cotton waste , 2 inches bore clamp heavy , 3 inches bore clamp heavy , 4 inches bore clamp heavy , 4 inches foot valve leather kohinoor , bleaching powder 25kg , godrej lock 7 lever brass , 2 half inches green hose 30mtr , 7.5 hp open well submersible motor pump texmo , water meter 20mm //bid details 2 / 45

CTN :41257966

18 Aug, 2025 66

Anekal - Karnataka

Tender For annual supply of pvc items for hennagara gp for the year of 2025-26 - upvc collar 2.5 inch, upvc collar 2 inch, upvc collar 1.5 inch, upvc collar 1 inch, upvc collar 0.5 inch, upvc elbow 2.5 inch , upvc elbow 2 inch , upvc elbow 1.5 inch, upvc elbow 1 inch , upvc elbow 0.5 inch , upvc pipes 2.5 inch 1 length, upvc pipes 2 inch 1 length, upvc pipes 1.5 inch 1 length, upvc pipes 1inch 1 length, upvc pipes 0.5 inch 1 length, brass gate wall 2.5inches - iso certified, brass gate wall 2inches - iso certified, solvent cement gum 100ml - iso certified, end cap pvc 2.5inches - iso certified, end cap pvc 2inches - iso certified, end cap pvc 1.5inches - iso certified, end cap pvc 1 inches - iso certified, end cap pvc 0.75inches - iso certified, pvc gate wall with thread 2.5inches- iso certified, pvc gate wall with thread 2 inches- iso certified, pvc gate wall 2.5inches - iso certified, pvc gate wall 2inches - iso certified, pvc gate wall 1.5inches - iso certified, pvc gate wall 1inches - iso certified, pvc gate wall 0.75inches - iso certified, pvc reducer 2.5inches - iso certified, pvc reducer 2inches - iso certified, pvc reducer 1.5inches - iso certified, pvc reducer 1inches - iso certified, pvc reducer 0.75inches - iso certified, pvc tee 2.5inches - iso certified, pvc tee 2inches - iso certified, pvc tee 1.5 inches - iso certified, pvc tee 1 inches - iso certified, motor 5.5 hp 50stage pump, pvc tee 0.75inches - iso certified, pvc mta 2.5inches - iso certified, pvc mta 2inches - iso certified, pvc mta 1.5inch - iso certified, pvc mta 1inch - iso certified, pvc mta 0.75inch - iso certified, pvc ft 2.5inches - iso certified, pvc ft 2inches - iso certified, pvc ft 1.5inches - iso certified, pvc ft 1 inches - iso certified, pvc ft 0.75inches - iso certified, pvc coller 2.5inches - iso certified, pvc coller 2 inches - iso certified, pvc coller 1.5 inches - iso certified, pvc coller 1 inches - iso certified, pvc coller 0.75 inches - iso certified, pvc elbow 2.5 inches - iso certified, pvc elbow 2 inches - iso certified, pvc elbow 1.5 inches - iso certified, pvc elbow 1 inches - iso certified, pvc elbow 0.75inches - iso certified, pvc pipes 2.5inches 1 length, pvc pipes 2 inches 1 length, pvc pipes 1.5 inches 1 length, pvc pipes 1 inches 1 length, pvc pipes 0.75 inches 1 length

corporations/Associations/Others

CTN :41192873

07 Aug, 2025 2.10 Lacs

Haveri - Karnataka

Tender For dma/hvr/2025-26/water supply materials annual maitainance/ts - for 25 mm dia gi collar , for 32 mm dia gi collar , for 50 mm dia gi collar , electro fusion coupler 63 mm, electro fusion coupler 75 mm, electro fusion coupler 90 mm, electro fusion tee 63 mm , electro fusion tee 75 mm , electro fusion tee 90 mm , electro fusion elbow 63 mm , electro fusion elbow 75 mm , electro fusion elbow 90 mm , electro fusion reducer 90x63 mm , electro fusion reducer 75x63 mm , stainer 80 mm, m.s. flange 3 inch, cpv fta 0.5, cpve elbow brass 0.5 , compression mta 63 mm , compression mta 75 mm, compression mta 90 mm , pvc insulated cable of flat 3 core (sheathed) 1x3x1.5 sqm, sqm pvc insulated cable of flat 3 core (sheathed) 1x3x2.5, pvc insulated cable of flat 3 core (sheathed) 1x3x4 sqm, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000 3phase, ss bowl and impeller with low volt motor as per specifications,6.50 hp - 135 lpm at 110 m equals to 12 stg outlet dia - 2.00 inch , gi union 20.88.4 32 mm nominal bore , gi union 20.88.6 50 mm nominal bore , for 20 mm dia gi collar , pvc tee 180 mm dia , pvc tee 200 mm dia , pvc bend 25 mm dia , pvc bend 32 mm dia , pvc bend 40 mm dia , pvc bend 63 mm dia , pvc bend 180 mm dia , pvc bend 200 mm dia , pvc service saddles 25 mm dia , pvc service saddles 32 mm dia , pvc service saddles 110 mm dia , pvc service saddles 140 mm dia , pvc service saddles 160 mm dia , pvc service saddles 180 mm dia , pvc service saddles 200 mm dia , pvc reducer 25 mm dia, pvc reducer 32 mm dia , pvc reducer 40 mm dia , pvc reducer 140 mm dia , pvc reducer 160 mm dia , pvc reducer 180 mm dia , pvc reducer 200 mm dia , chlorinated polyvinyl - chloride (cpvc) pipe 32 mm nominal dia. , brass bib-cock 15 mm dia , brass bib-cock 20 mm dia , coconut broom stick , coir brushes , enamel paint , pvc couplers 25mm dia , dry distemper , nuts and bolts , ms flanges of 100mm dia and 8mm thick. , ms flanges of 150mm dia and 12mm thick. , pvc couplers 32mm dia , ms flanges of 200mm dia and 16mm thick. , ms flanges of 250mm dia and 16mm thick. , ms flanges of 300mm dia and 16mm thick. , providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications 2 hp 1.5kw-25 stage, electrical & automation aluminum alloy dol starter, power 4 horsepower 3phase l&t,siemens equvilent, electrical & automation aluminum alloy dol starter, power 4 horsepower single phase l&t,siemens equvilent, pvc couplers 40mm dia , pvc couplers 50mm dia , pvc couplers 90mm dia , pvc couplers 160mm dia , pvc couplers 180mm dia , pvc tee 32 mm dia, pvc tee 140 mm dia , for 20 mm dia gi elbow , for 25 mm dia gi elbow , for 32 mm dia gi elbow , for 50 mm dia gi elbow , for 20 mm dia gi bend , for 25 mm dia gi bend , for 32 mm dia gi bend , for 50 mm dia gi bend , for 20 mm dia gi tee , for 25 mm dia gi tee , for 32 mm dia gi tee , for 50 mm dia gi tee , for 20 mm dia gi socket , for 25 mm dia gi socket , for 32 mm dia gi socket , for 50 mm dia gi socket , for 15 mm dia gm gland cocks , for 20 mm dia gm gland cocks , providing and laying of warning tape / caution tape / detector tape for hdpe pipes of 200 mm wide, 300 micron thick, blue in colour confoming to relevant iss with latest amendments with appurtenances., complete, size 50 mm gate valve, size 50 mm non-return valve, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm nominal dia. , chlorinated polyvinyl - chloride (cpvc) pipe 25 mm nominal dia. , medium duty gi pipe of 32mm dia , medium duty gi pipe of 50mm dia , pvc pipes of 6 kg/cm2 for 110mm(1.894) , pvc pipes of 6 kg/cm2 for 160mm(3.923) , pvc pipes of 6 kg/cm2 for 200mm(6.233) , rcc pipe np3 600 mm dia & 2.5 m long , rubber gasket sbr quality 450mm dia. , upvc pipe is 16098 sn 4 - 110mm dia , hdpe pipe grade pe80-pn6.0, 75mm , hdpe pipe grade pe80-pn6.0, 90mm , hdpe pipe grade pe80-pn6.0, 110mm , providing and fixing ms casing collar

CTN :41196882

11 Aug, 2025 2.47 Lacs

Multi City - Karnataka

Tender For procurement of spare parts required for maintenance of drinking water and supply of new motor pumps and panel boards for chitrahalli grama panchayath. - axel frame(gp rdpr ctd), pvc long caller 4 inch(gp rdpr ctd), pvc long caller 3 inch(gp rdpr ctd), pvc long caller 2inch(gp rdpr ctd), pvc long caller 2.5inch(gp rdpr ctd), pvc end cap 3 inch(gp rdpr ctd), pvc end cap 2.5inch(gp rdpr ctd), pvc end cap 2 inch(gp rdpr ctd), pvc end cap 1.50 (gp rdpr ctd), pvc end cap 1.25 (gp rdpr ctd), pvc end cap 1 inch(gp rdpr ctd), pvc end cap 0.75 inch (gp rdpr ctd), pvc end cap 0.5 inch(gp rdpr ctd), feet ss nipple 1.25 x10(gp rdpr ctd), pvc tehred wall 3 inch(gp rdpr ctd), pvc tehred wall 2.5inch(gp rdpr ctd), pvc tehred wall 2 inch(gp rdpr ctd), pvc tehred wall 1.50 inch(gp rdpr ctd), pvc tehred wall 1.25 inch(gp rdpr ctd), pvc tehred wall 1 inch(gp rdpr ctd), pvc tehred wall 0.75 inch (gp rdpr ctd), pvc tehred wall 0.5 inch(gp rdpr ctd), pvc reducer 1x 0.75 inch(gp rdpr ctd), beed wall 2.5 inch(gp rdpr ctd), beed wall 2 inch(gp rdpr ctd), pvc wall 3 inch (gp rdpr ctd), pvc wall 2.5 inch (gp rdpr ctd), pvc wall 2 inch (gp rdpr ctd), pvc wall 1.05inch(gp rdpr ctd), pvc wall 1.25 inch(gp rdpr ctd), pvc wall 1 inch(gp rdpr ctd), pvc wall 0.75 inch(gp rdpr ctd), pvc wall 0.5 inch(gp rdpr ctd), pvc t 7 inch(gp rdpr ctd), pvc t 4 inch(gp rdpr ctd), pvc t 3 inch(gp rdpr ctd), pvc t 2.5 inch(gp rdpr ctd), pvc t 2 inch(gp rdpr ctd), pvc t 1.5 inch(gp rdpr ctd), pvc t 1.25 inch(gp rdpr ctd), pvc t 1 inch(gp rdpr ctd), pvc t 0.75 inch(gp rdpr ctd), pvc t 0.5 inch(gp rdpr ctd), pvc elbow 7 inch(gp rdpr ctd), pvc elbow 4 inch(gp rdpr ctd), pvc elbow 3 inch(gp rdpr ctd), pvc elbow 2.05 inch(gp rdpr ctd), pvc elbow 2 inch(gp rdpr ctd), pvc elbow 1.5 inch(gp rdpr ctd), pvc elbow 1.25 inch(gp rdpr ctd), pvc elbow 1 inch(gp rdpr ctd), pvc elbow 0.75 inch(gp rdpr ctd), pvc elbow 0.5 inch(gp rdpr ctd), pvc collar 7 inch(gp rdpr ctd), pvc collar 4 inch(gp rdpr ctd), pvc collar 3 inch(gp rdpr ctd), pvc collar 2.50inch(gp rdpr ctd), pvc collar 2 inch(gp rdpr ctd), pvc collar 1.50 inch(gp rdpr ctd), pvc collar 1.25 inch (gp rdpr ctd), pvc collar 1 inch (gp rdpr ctd), pvc collar 0.75 inch (gp rdpr ctd), pvc collar 0.5 inch(gp rdpr ctd), pvc sadal 90mm (gp rdpr ctd), pvc sadal 75mm (gp rdpr ctd), pvc sadal 63mm (gp rdpr ctd), solavent 100 ml(gp rdpr ctd), salake(gp rdpr ctd), celing waser(gp rdpr ctd), caplings(gp rdpr ctd), bolt nut 12 mm (gp rdpr ctd), bolt nut10 mm(gp rdpr ctd), chian nut 10mm(gp rdpr ctd), water tank 1000ltr(gp rdpr ctd), cp gm pushcoc 0.75 inch (gp rdpr ctd), cp gm pushcoc 0.5 inch(gp rdpr ctd), screwdruver (long)(gp rdpr ctd), bore cap 6 inch (gp rdpr ctd), bore cap 7 inch (gp rdpr ctd), bore cap 8 inch (gp rdpr ctd), piperich 10 inch (gp rdpr ctd), pipe rich 18 inch (gp rdpr ctd), piperich 24 inch (gp rdpr ctd), cuttingpiller(gp rdpr ctd), axel blade(gp rdpr ctd), frb pipe(gp rdpr ctd), bore clamp(gp rdpr ctd), nipple 0.75x18(gp rdpr ctd), nipple 0.75x12(gp rdpr ctd), nipple 0.75x9(gp rdpr ctd), nipple 0.5x18(gp rdpr ctd), nipple 0.5x24(gp rdpr ctd), nipple 0.5x9(gp rdpr ctd), nipple0.5x12(gp rdpr ctd), nipple 0.5x6(gp rdpr ctd), pvc pipe 7 inch(gp rdpr ctd), pvc pipe 4 inch(gp rdpr ctd), pvc pipe 3 inch(gp rdpr ctd), pvc pipe 2.5 inch(gp rdpr ctd), pvc pipe 2 inch(gp rdpr ctd), pvc pipe 1.5 inch(gp rdpr ctd), pvc pipe1.5 inch(gp rdpr ctd), pvc pipe 1 inch(gp rdpr ctd), pvc pipe 0.75 inch(gp rdpr ctd), pvc pipe 0.5 inch(gp rdpr ctd), gi brass value 2(gp rdpr ctd), gi ci value 3(gp rdpr ctd), gi raducer 1(gp rdpr ctd), gi raducer 0.75 inch (gp rdpr ctd), gi raducer 0.5(gp rdpr ctd), gi tap 1(gp rdpr ctd), gi tap 0.75 inch (gp rdpr ctd), gi tap 0.5 inch(gp rdpr ctd), gi reducer 1.75 inch(gp rdpr ctd), g i bend .75 inch(gp rdpr ctd), cable/meter 4mm (gp rdpr ctd), gi coller 1.25 inch (gp rdpr ctd), planze sat g i 2(gp rdpr ctd), nrv wight plat 2(gp rdpr ctd), nrv washer 2(gp rdpr ctd), nrv 2(gp rdpr ctd), gi pipe 1.25 inch (gp rdpr ctd), feet

Corporations And Associations And Others

CTN :41218928

04 Aug, 2025 NA

Rohtak - Haryana

Tender For fabrication and erection - boiler house, dismantling, fabrication & erection of aph outlet cane to match the size of cane with esp nozzle inlet size, dis, fab & ere of air heater expansion bellow, dis, fabrication and erection of id fan upper & lower casing, dismantling, fabrication & erection of drum type rotary bagasse feeder (with shalf), dismantling, fabrication & erection of screw feeder, dismantling, fabrication & erection of screw feeder casing., fabrication & erection of man hole, fabrication & erection of pneumatic spreader assembly from 8mm thk. s.s. plate with fabrication & erection of deflector plate from 20mm thk. s.s. plate with top & bottom flange , dismantling of old pneumatic spreader assembly & internal deflector plate, 1.5 kg/cm2 prds, exhaust & vapour pipeline fabrication & erection from 10mm thk. m. s. plate, boiling house, platform work at various stations such as mill house, boiler, turbine,cranes, boiling house, c/f house etc. if required any where., fab & erection of double filteration system for quad & water inlet pipe in pan condenser., fabrication of electric motor cover., dis,fab & ere of final molasses pipeline, fab & erecdtion of m.s.vessels, square & rectangular tank, fab & erection of m.s.plate work, dis,fab & ere of coil(water,juice,ammonia,so2etc), fab and erection of motor bed, dismentling, fabrication & erection of perforated m.s plates of direct contact juice heaters., dismentling , fabrication & erection of strainers of injection, spray , c.t pumps., fabrication of exhaust valve casing, gutter work (bigger side will be treated as dia.), gutter work dismantling, gutter work fabrication, gutter work erection, fabrication / strenghting of beam, vessel, pipe, channel, angle etc., dismantling of m.s plate, dismantling, fabrication & erection of cone as per requirement, dismantling, fabrication & erection of spray pond header, dismantling, fabrication & erection of down tape of evaporator bodies, fabrication & erection of molasses jacket for batch type c/f m/c, dismantling, fabrication & erection of various stations for entertainment catcher, dismantling fabrication & erection vapour/exhaust line from quad to pan station, dismantling, fabrication & erection of bagassecillo line, dismantling, fabrication & erection of underground & outside pipeline of all sizes, boiler/turbine, cooling tower sugar godown/workshop/store/cane unloader & factory, fab & erection of gate, strengthning of tress beams,vessel,pipe with channel,angle,pipe etc any where, roof sheets /acc /iron sheet work. dis-, roof sheets /acc /iron sheet work. repair, roof sheets /acc /iron sheet work. replacement & erection, fab & erection of m.s.stair/ladder a) single story , double story, dismantling, fabrication & erection of underground and outside pipeline of all sizes, fabrication & erection of nrv of ct pump, dismantling, fabrication & erection of cooling tower pipeline from cooling tower of turbine, dis. of old damaged platform from boiler to turbine, fabrication & erection of platform (size- 1mtr width) from boiler to turbine material of old esp, misc .items., m.s pipeline per inch dia//ft/length (a ) dismentling of pipe line., upto 1 dia to 12 dia ., above 12 , fabrication of pipe line from m.s.plate or ready-made pipe any dia ., erection of pipe line per inch dia/ft/length (i) upto 1 dia to, erection of pipe line per inch dia/ft/length (ii. above 12 dia, m.s.pipe accessories work, dismantling of bends, tee, reducder, cross, elbow,nipple,nozzle, flanged, and bends. (per inch dia/ft/length ) (a) upto 1 dia to 12 dia, m.s.pipe accessories work, dismantling of bends, tee, reducder, cross, elbow,nipple,nozzle, flanged, and bends. (per inch dia/ft/length (ii.) above 12 dia., fabrication of bends, tee, reducer etc.-(p.inch dia/ft) (i) upto 1 diato 12 dia, fabrication of bends, t

State Government

CTN :41234048

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of c/f pump (clear water) and its accessories at saraswatipur rwss - supplying ,installation and commissioning of multi stage/ horizontal split casing/multi stage centrifugal pump (make: kirloskar / wpil/jyoti/ mather & platt) rating-15 kw/20hp as per is:5120, capable for discharging 72 m3/hr against a head of 40 m , consisting of bronze impellers, stainless steel pump shaft, etc. with all accessories coupled with energy efficient (ie3) tefc squirrel cage induction motor confirming to is:325 and is:12615, having 15% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar /abb/cgl/bhel] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, foot valve, pressure gauge, nuts & bolts, packings, fitting & fixing, labour & technician, etc. all complete job as per site requirement and direction of e/i. discharging -72 m3/hr and head - 40m (1w + 1s) 20 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 20 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job., cost towards making suitable suction line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion, including making hole for suction, cutting, welding etc all complete., cost towards making suitable delivery line by suppling of ms pipe, bend, flange, nut, bolt rubber insertion including joining the new suction line to the existing header by means of cutting, welding etc all complete., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 100 a copper busbar- 4 pole, 1 no. 100 a mccb as incoming feeder and 2 nos. 63a mccb as outgoing feeders for motors, 1 no. 63 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i .), supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors), providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismanteling of old pump set and foundation and making arrangements for removal of debries from the pump house., construction of chamber for 100mm sluices valve.

State Government

CTN :41234051

04 Aug, 2025 NA

Chaibasa - Jharkhand

Tender For quotation for rate of vt pump (raw water) and its accessories at saraswatipur rwss - supplying , installation and commissioning of single/multi stage vertical turbine pump sets (make: kirloskar /wpil/ mather & platt), rating-22kw/30hp approx as per is 1710, capable of discharging 94.56 m3/hr against a head of 50 m, consisting of bowl assemblies, bronze impellers, column assembly, stainless steel pump shaft, line shaft, etc. with all accessories coupled with squirrel cage induction motor confirming to is:325 and is:12615, having 20% more bhp than that of pump, operating on 1500rpm, 415v, 3 ph, 50 hz [make: kirloskar, jyoti, abb, cgl, bhel, jsl] all complete with required size of sluice valve and cidf non- return valve standard fitting, strainers, reducer, pressure gauge, etc. all complete job as per site requirement and direction of e/i. discharging -94.56 m3/hr and head - 50m (1w + 1s) 30 hp, cost towards making new foundation base for pump -motor set and panel including providing new ms base plate as per sample suitable for 30 hp pump- motor set, cutting and welding where necessary, nuts, bolts, flange etc with all labour, tools and materials all complete job for raw water vt pump set., cost towards jointing newly installed pump motor set to the existing header at raw water p/p., providing , erecting and commissioning lt motor control panel board fabricated with ms sheet and painted, dust-vermin proof. floor mounted cubical panel board shall be consisting of proper power distribution 160 a copper busbar- 4 pole, 1 no. 160 a mccb as incoming feeder and 2 nos. 100a mccb as outgoing feeders for motors, 1 no. 100 a mccb as spare feeder (for motor), 2 no. 32a mcb for lighting and other loads. including selector switches, switch disconnector isolator, voltmeters, ampere meters, mfm, indicator lamps, internal wiring, danger board, protection units & relay, capacitor banks/apfc and 02 nos suitable fasd starter, etc. all complete and as per is and direction of e/i ., supplying and erecting 16 sqmm 3 core xlpe / pvc insulated, 1100 v grade un-armoured copper cable with isi mark stranded / solid copper conductor complete erected on wall / panel or in provided trench in an approved manner. (from panel to motors)., providing and erecting chemical earthing with all required materials etc all complete., cost of 3t triple type chain pully block suitable as below with 6m lift complete with laoad chain and hand chain suitable for avove lift, tested 50% over load as per is 3832 carry isi etc. all complete job as per the site requirement and indian standard., cost towards dismantling of old pump set and foundation and making arrangements for removal of debries from the pump house.

Boat Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Corporations And Associations And Others

State Government

State Government